From dab8f9f0fe3aada61c0eb013dcf7d3ff75a2c336 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Fri, 21 Jun 2024 16:37:13 +0200 Subject: [PATCH] pwm: stm32: Fix calculation of prescaler MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit A small prescaler is beneficial, as this improves the resolution of the duty_cycle configuration. However if the prescaler is too small, the maximal possible period becomes considerably smaller than the requested value. One situation where this goes wrong is the following: With a parent clock rate of 208877930 Hz and max_arr = 0xffff = 65535, a request for period = 941243 ns currently results in PSC = 1. The value for ARR is then calculated to ARR = 941243 * 208877930 / (1000000000 * 2) - 1 = 98301 This value is bigger than 65535 however and so doesn't fit into the respective register field. In this particular case the PWM was configured for a period of 313733.4806027616 ns (with ARR = 98301 & 0xffff). Even if ARR was configured to its maximal value, only period = 627495.6861167669 ns would be achievable. Fix the calculation accordingly and adapt the comment to match the new algorithm. With the calculation fixed the above case results in PSC = 2 and so an actual period of 941229.1667195285 ns. Fixes: 8002fbeef1e4 ("pwm: stm32: Calculate prescaler with a division instead of a loop") Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/b4d96b79917617434a540df45f20cb5de4142f88.1718979150.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König --- drivers/pwm/pwm-stm32.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/pwm/pwm-stm32.c b/drivers/pwm/pwm-stm32.c index 3e7b2a8e34e7..97d3de24f312 100644 --- a/drivers/pwm/pwm-stm32.c +++ b/drivers/pwm/pwm-stm32.c @@ -321,17 +321,23 @@ static int stm32_pwm_config(struct stm32_pwm *priv, unsigned int ch, * First we need to find the minimal value for prescaler such that * * period_ns * clkrate - * ------------------------------ + * ------------------------------ < max_arr + 1 * NSEC_PER_SEC * (prescaler + 1) * - * isn't bigger than max_arr. + * This equation is equivalent to + * + * period_ns * clkrate + * ---------------------------- < prescaler + 1 + * NSEC_PER_SEC * (max_arr + 1) + * + * Using integer division and knowing that the right hand side is + * integer, this is further equivalent to + * + * (period_ns * clkrate) // (NSEC_PER_SEC * (max_arr + 1)) ≤ prescaler */ prescaler = mul_u64_u64_div_u64(period_ns, clk_get_rate(priv->clk), - (u64)NSEC_PER_SEC * priv->max_arr); - if (prescaler > 0) - prescaler -= 1; - + (u64)NSEC_PER_SEC * ((u64)priv->max_arr + 1)); if (prescaler > MAX_TIM_PSC) return -EINVAL; -- 2.39.5