From a479e71322ced3e663b0baf17a6d250c973454c8 Mon Sep 17 00:00:00 2001 From: Hilda Wu Date: Wed, 5 Oct 2022 16:43:31 +0800 Subject: [PATCH] Bluetooth: btusb: Ignore zero length of USB packets on ALT 6 for specific chip For USB ALT 6 settings some Realtek chips need to transmit mSBC data continuously without the zero length of USB packets. In this commit, create BTUSB_ALT6_CONTINUOUS_TX to manage the behavior. Therefore, create REALTEK_ALT6_CONTINUOUS_TX_CHIP to manage the specific chip model for the behavior. Signed-off-by: Max Chou Signed-off-by: Hilda Wu Signed-off-by: Luiz Augusto von Dentz --- drivers/bluetooth/btrtl.c | 7 +++++++ drivers/bluetooth/btusb.c | 25 +++++++++++++++++++++++-- 2 files changed, 30 insertions(+), 2 deletions(-) diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c index fb52313a1d45..69c3fe649ca7 100644 --- a/drivers/bluetooth/btrtl.c +++ b/drivers/bluetooth/btrtl.c @@ -781,6 +781,13 @@ void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev) case CHIP_ID_8852C: set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks); set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks); + + /* RTL8852C needs to transmit mSBC data continuously without + * the zero length of USB packets for the ALT 6 supported chips + */ + if (btrtl_dev->project_id == CHIP_ID_8852C) + btrealtek_set_flag(hdev, REALTEK_ALT6_CONTINUOUS_TX_CHIP); + hci_set_aosp_capable(hdev); break; default: diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 39a30c36586a..1a14447fafa8 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -632,6 +632,7 @@ static const struct dmi_system_id btusb_needs_reset_resume_table[] = { #define BTUSB_TX_WAIT_VND_EVT 13 #define BTUSB_WAKEUP_AUTOSUSPEND 14 #define BTUSB_USE_ALT3_FOR_WBS 15 +#define BTUSB_ALT6_CONTINUOUS_TX 16 struct btusb_data { struct hci_dev *hdev; @@ -1322,11 +1323,17 @@ static void btusb_isoc_complete(struct urb *urb) static inline void __fill_isoc_descriptor_msbc(struct urb *urb, int len, int mtu, struct btusb_data *data) { - int i, offset = 0; + int i = 0, offset = 0; unsigned int interval; BT_DBG("len %d mtu %d", len, mtu); + /* For mSBC ALT 6 settings some chips need to transmit the data + * continuously without the zero length of USB packets. + */ + if (test_bit(BTUSB_ALT6_CONTINUOUS_TX, &data->flags)) + goto ignore_usb_alt6_packet_flow; + /* For mSBC ALT 6 setting the host will send the packet at continuous * flow. As per core spec 5, vol 4, part B, table 2.1. For ALT setting * 6 the HCI PACKET INTERVAL should be 7.5ms for every usb packets. @@ -1346,6 +1353,7 @@ static inline void __fill_isoc_descriptor_msbc(struct urb *urb, int len, urb->iso_frame_desc[i].length = offset; } +ignore_usb_alt6_packet_flow: if (len && i < BTUSB_MAX_ISOC_FRAMES) { urb->iso_frame_desc[i].offset = offset; urb->iso_frame_desc[i].length = len; @@ -2368,6 +2376,19 @@ static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb) return -EILSEQ; } +static int btusb_setup_realtek(struct hci_dev *hdev) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + int ret; + + ret = btrtl_setup_realtek(hdev); + + if (btrealtek_test_flag(data->hdev, REALTEK_ALT6_CONTINUOUS_TX_CHIP)) + set_bit(BTUSB_ALT6_CONTINUOUS_TX, &data->flags); + + return ret; +} + /* UHW CR mapping */ #define MTK_BT_MISC 0x70002510 #define MTK_BT_SUBSYS_RST 0x70002610 @@ -3969,7 +3990,7 @@ static int btusb_probe(struct usb_interface *intf, if (IS_ENABLED(CONFIG_BT_HCIBTUSB_RTL) && (id->driver_info & BTUSB_REALTEK)) { - hdev->setup = btrtl_setup_realtek; + hdev->setup = btusb_setup_realtek; hdev->shutdown = btrtl_shutdown_realtek; hdev->cmd_timeout = btusb_rtl_cmd_timeout; -- 2.39.5