From 3c588c6879d52906b9ceed8c998a427db9f92c32 Mon Sep 17 00:00:00 2001
From: =?utf8?q?Duje=20Mihanovi=C4=87?= <duje.mihanovic@skole.hr>
Date: Wed, 27 Dec 2023 21:47:07 +0100
Subject: [PATCH] arm64: dts: samsung-coreprimevelte: add vibrator

---
 .../pxa1908-samsung-coreprimevelte.dts        | 19 +++++++++++++++++++
 arch/arm64/boot/dts/marvell/pxa1908.dtsi      |  7 +++++++
 2 files changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/pxa1908-samsung-coreprimevelte.dts b/arch/arm64/boot/dts/marvell/pxa1908-samsung-coreprimevelte.dts
index 0bea43564f73..9d222062504a 100644
--- a/arch/arm64/boot/dts/marvell/pxa1908-samsung-coreprimevelte.dts
+++ b/arch/arm64/boot/dts/marvell/pxa1908-samsung-coreprimevelte.dts
@@ -134,6 +134,15 @@
 		powerdown-gpios = <&gpio 57 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>;
 	};
+
+	vibrator {
+		compatible = "pwm-vibrator";
+		pwm-names = "enable";
+		pwms = <&pwm 100000>;
+		enable-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_pins>;
+	};
 };
 
 &smmu {
@@ -443,6 +452,16 @@
 		pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>;
 		pinctrl-single,low-power-mode = <0x288 0x388>;
 	};
+
+	vibrator_pins: pinmux-vibrator {
+		pinctrl-single,pins = <0x12c 0>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0x8000 0xc000 0x8000 0xc000>;
+		pinctrl-single,bias-pulldown = <0xa000 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
 };
 
 &uart0 {
diff --git a/arch/arm64/boot/dts/marvell/pxa1908.dtsi b/arch/arm64/boot/dts/marvell/pxa1908.dtsi
index 8c47599373ba..74ee19424f56 100644
--- a/arch/arm64/boot/dts/marvell/pxa1908.dtsi
+++ b/arch/arm64/boot/dts/marvell/pxa1908.dtsi
@@ -195,6 +195,13 @@
 				};
 			};
 
+			pwm: pwm@1ac00 {
+				compatible = "marvell,pxa250-pwm";
+				reg = <0x1ac00 0x10>;
+				#pwm-cells = <1>;
+				clocks = <&apbc PXA1908_CLK_PWM3>;
+			};
+
 			pmx: pinmux@1e000 {
 				compatible = "marvell,pxa1908-padconf", "pinconf-single";
 				reg = <0x1e000 0x330>;
-- 
2.39.5