Mukul Joshi [Tue, 10 May 2022 01:45:50 +0000 (21:45 -0400)]
drm/amdkfd: Update MQD management on multi XCC setup
Update MQD management for both HIQ and user-mode compute
queues on a multi XCC setup. MQDs needs to be allocated,
initialized, loaded and destroyed for each XCC in the KFD
node.
v2: squash in fix "drm/amdkfd: Fix SDMA+HIQ HQD allocation on GFX9.4.3"
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Signed-off-by: Amber Lin <Amber.Lin@amd.com> Tested-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mukul Joshi [Mon, 9 May 2022 20:33:38 +0000 (16:33 -0400)]
drm/amdkfd: Add spatial partitioning support in KFD
This patch introduces multi-partition support in KFD.
This patch includes:
- Support for maximum 8 spatial partitions in KFD.
- Initialize one HIQ per partition.
- Management of VMID range depending on partition mode.
- Management of doorbell aperture space between all
partitions.
- Each partition does its own queue management, interrupt
handling, SMI event reporting.
- IOMMU, if enabled with multiple partitions, will only work
on first partition.
- SPM is only supported on the first partition.
- Currently, there is no support for resetting individual
partitions. All partitions will reset together.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Tested-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce a new structure, kfd_node, which will now represent
a compute node. kfd_node is carved out of kfd_dev structure.
kfd_dev struct now will become the parent of kfd_node, and will
store common resources such as doorbells, GTT sub-alloctor etc.
kfd_node struct will store all resources specific to a compute
node, such as device queue manager, interrupt handling etc.
This is the first step in adding compute partition support in KFD.
v2: introduce kfd_node struct to gc v11 (Hawking)
v3: make reference to kfd_dev struct through kfd_node (Morris)
v4: use kfd_node instead for kfd isr/mqd functions (Morris)
v5: rebase (Alex)
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Tested-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Morris Zhang <Shiwu.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Amber Lin [Thu, 27 Jan 2022 14:02:16 +0000 (09:02 -0500)]
drm/amdkfd: Set F8_MODE for gc_v9_4_3
Set F8_MODE for GC 9.4.3 as optimal/non-IEEE. Also update gc_v9_0
to gc_v9_4_3 to include more definitions such as the F8_MODE bit, and
remove unused header files.
v2: fix IP version check (Alex)
Signed-off-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Amber Lin [Tue, 17 May 2022 15:41:01 +0000 (23:41 +0800)]
drm/amdgpu: Add kgd2kfd for GC 9.4.3
New GC (v9.4.3) and ATHUB (v1.8.0) versions
are used. Add kgd_gfx_v9_4_3_*
functions if registers in use of kgd_gfx_v9_*
functions are changed or have different offset.
Signed-off-by: Amber Lin <Amber.Lin@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Mukul Joshi <mukul.joshi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shiwu Zhang [Thu, 23 Dec 2021 05:44:48 +0000 (13:44 +0800)]
drm/amdgpu: alloc vm inv engines for every vmhub
There are AMDGPU_MAX_VMHUBS of vmhub in maximum and need to init the
vm_inv_engs for all of them.
In this way, the below error can be ruled out.
[ 217.317752] amdgpu 0000:02:00.0: amdgpu: no VM inv eng for ring sdma0
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com> Reviewed-by: Christian Koenig <Christian.Koenig@amd.com> Reviewed-by: Le Ma <Le.Ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Le Ma [Mon, 20 Dec 2021 08:06:25 +0000 (16:06 +0800)]
drm/amdgpu: assign different AMDGPU_GFXHUB for rings on each xcc
Pass the xcc_id to AMDGPU_GFXHUB(x)
Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Le Ma [Mon, 20 Dec 2021 08:42:20 +0000 (16:42 +0800)]
drm/amdgpu: init vmhubs bitmask for GC 9.4.3
Each XCD owns one GFXHUB.
v2: switch to the new VMHUB layout
Signed-off-by: Le Ma <le.ma@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Le Ma [Mon, 20 Dec 2021 08:06:25 +0000 (16:06 +0800)]
drm/amdgpu: add bitmask to iterate vmhubs
As the layout of VMHUB definition has been changed to cover multiple
XCD/AID case, the original num_vmhubs is not appropriate to do vmhub
iteration any more.
Drop num_vmhubs and introduce vmhubs_mask instead.
v2: switch to the new VMHUB layout
v3: use DECLARE_BITMAP to define vmhubs_mask
Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Le Ma [Sun, 19 Dec 2021 03:03:59 +0000 (11:03 +0800)]
drm/amdgpu: assign register address for vmhub object on each XCD
Each XCD has its own gfxhub.
v2: switch to the new VMHUB layout
v3: fix mistake
Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: introduce vmhub definition for multi-partition cases (v3)
v1: Each partition has its own gfxhub or mmhub. adjust
the num of MAX_VMHUBS and the GFXHUB/MMHUB layout (Le)
v2: re-design the AMDGPU_GFXHUB/AMDGPU_MMHUB layout (Le)
v3: apply the gfxhub/mmhub layout to new IPs (Hawking)
v4: fix up gmc11 (Alex)
v5: rebase (Alex)
Signed-off-by: Le Ma <le.ma@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Daniel Miess [Tue, 25 Apr 2023 18:02:02 +0000 (14:02 -0400)]
drm/amd/display: Remove v_startup workaround for dcn3+
[Why]
Calls to dcn20_adjust_freesync_v_startup are no longer
needed as of dcn3+ and can cause underflow in some cases
[How]
Move calls to dcn20_adjust_freesync_v_startup up into
validate_bandwidth for dcn2.x
Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Daniel Miess <daniel.miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no need to use dc_version in the dc_construct_ctx since this
value is copied to dc_ctx->dce_version later. This commit removes the
extra steps.
Reviewed-by: Alex Hung <alex.hung@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Fri, 5 May 2023 15:06:26 +0000 (11:06 -0400)]
drm/amd/display: Make unbounded req update separate from dlg/ttu
[Description]
- Updates to unbounded requesting should not be conditional
on updates to dlg / ttu, as this could prevent unbounded
requesting from being updated if dlg / ttu does not change
Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Add visual confirm color support for MCLK switch
[Why && How]
We would like to have visual confirm color support for MCLK switch.
1. Set visual confirm color to yellow: Vblank MCLK switch.
2. Set visual confirm color to cyan: FPO + Vblank MCLK
switch.
3. Set visual confirm color to pink: Vactive MCLK switch.
Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Daniel Miess [Tue, 25 Apr 2023 18:29:48 +0000 (14:29 -0400)]
drm/amd/display: Fix possible underflow for displays with large vblank
[Why]
Underflow observed when using a display with a large vblank region
and low refresh rate
[How]
Simplify calculation of vblank_nom
Increase value for VBlankNomDefaultUS to 800us
Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Daniel Miess <daniel.miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Tue, 2 May 2023 16:27:26 +0000 (12:27 -0400)]
drm/amd/display: Update vactive margin and max vblank for fpo + vactive
[Description]
- Some 1920x1080@60hz displays have VBLANK time > 600us which we
still want to accept for FPO + Vactive configs based on testing
- Increase max VBLANK time to 1000us to allow these configs
for FPO + Vactive
- Increase minimum vactive switch margin for FPO + Vactive to 200us
- Based on testing, 1920x1080@120hz can have a switch margin
of ~160us which requires significantly longer FPO stretch
margin (5ms) which we don't want to accept for now
- Also move margins into debug option
Reviewed-by: Jun Lei <jun.lei@amd.com> Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Tue, 2 May 2023 13:54:56 +0000 (09:54 -0400)]
drm/amd/display: Only skip update for DCFCLK, UCLK, FCLK on overclock
[Description]
- Update clocks is skipped in the GPU overclock sequence
- However, we still need to update DISPCLK, DPPCLK, and DTBCLK
because the GPU overclock sequence could temporarily disable
ODM 2:1 combine because we disable all planes in the sequence
Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 11 May 2023 07:41:27 +0000 (15:41 +0800)]
drm/amd/pm: fix possible power mode mismatch between driver and PMFW
PMFW may boots the ASIC with a different power mode from the system's
real one. Notify PMFW explicitly the power mode the system in. This
is needed only when ACDC switch via gpio is not supported.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guchun Chen [Tue, 9 May 2023 08:15:27 +0000 (16:15 +0800)]
drm/amdgpu: skip disabling fence driver src_irqs when device is unplugged
When performing device unbind or halt, we have disabled all irqs at the
very begining like amdgpu_pci_remove or amdgpu_device_halt. So
amdgpu_irq_put for irqs stored in fence driver should not be called
any more, otherwise, below calltrace will arrive.
Alex Sierra [Mon, 24 Apr 2023 19:27:26 +0000 (14:27 -0500)]
drm/amdgpu: improve wait logic at fence polling
Accomplish this by reading the seq number right away instead of sleep
for 5us. There are certain cases where the fence is ready almost
immediately. Sleep number granularity was also reduced as the majority
of the kiq tlb flush takes between 2us to 6us.
Signed-off-by: Alex Sierra <alex.sierra@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 11 May 2023 14:40:03 +0000 (10:40 -0400)]
drm/amdgpu/gmc11: implement get_vbios_fb_size()
Implement get_vbios_fb_size() so we can properly reserve
the vbios splash screen to avoid potential artifacts on the
screen during the transition from the pre-OS console to the
OS console.
Acked-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jiapeng Chong [Fri, 12 May 2023 07:04:51 +0000 (15:04 +0800)]
drm/amd/display: Simplify the calculation of variables
./drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c:586:37-39: WARNING !A || A && B is equivalent to !A || B.
./drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c:595:37-39: WARNING !A || A && B is equivalent to !A || B.
Reported-by: Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4941 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yifan Zhang [Wed, 10 May 2023 08:13:48 +0000 (16:13 +0800)]
drm/amdgpu: change gfx 11.0.4 external_id range
gfx 11.0.4 range starts from 0x80.
Fixes: 311d52367d0a ("drm/amdgpu: add soc21 common ip block support for GC 11.0.4") Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reported-by: Yogesh Mohan Marimuthu <Yogesh.Mohanmarimuthu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Tim Huang <Tim.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/amdgpu: Fix warnings in amdgpu _object, _ring.c
Fix below warnings reported by checkpatch:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: static const char * array should probably be static const char * const
WARNING: space prohibited between function name and open parenthesis '('
WARNING: braces {} are not necessary for single statement blocks
WARNING: Symbolic permissions 'S_IRUGO' are not preferred. Consider using octal permissions '0444'.
Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu/gfx11: Adjust gfxoff before powergating on gfx11 as well
(Bas: speculative change to mirror gfx10/gfx9)
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu/gfx10: Disable gfxoff before disabling powergating.
Otherwise we get a full system lock (looks like a FW mess).
Copied the order from the GFX9 powergating code.
Fixes: 366468ff6c34 ("drm/amdgpu: Allow GfxOff on Vangogh as default") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2545 Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huacai Chen [Mon, 8 May 2023 03:09:41 +0000 (11:09 +0800)]
drm/amdgpu/display: Enable DC_FP for LoongArch
LoongArch now provides kernel_fpu_begin() and kernel_fpu_end() that are
used like the x86 counterparts in commit 2b3bd32ea3a22ea2d ("LoongArch:
Provide kernel fpu functions"), so we can enable DC_FP on LoongArch for
supporting more DCN devices.
Signed-off-by: WANG Xuerui <kernel@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guchun Chen [Sat, 6 May 2023 12:06:45 +0000 (20:06 +0800)]
drm/amdgpu/gfx: disable gfx9 cp_ecc_error_irq only when enabling legacy gfx ras
gfx9 cp_ecc_error_irq is only enabled when legacy gfx ras is assert.
So in gfx_v9_0_hw_fini, interrupt disablement for cp_ecc_error_irq
should be executed under such condition, otherwise, an amdgpu_irq_put
calltrace will occur.
Guchun Chen [Sat, 6 May 2023 08:52:59 +0000 (16:52 +0800)]
drm/amdgpu: disable sdma ecc irq only when sdma RAS is enabled in suspend
sdma_v4_0_ip is shared on a few asics, but in sdma_v4_0_hw_fini,
driver unconditionally disables ecc_irq which is only enabled on
those asics enabling sdma ecc. This will introduce a warning in
suspend cycle on those chips with sdma ip v4.0, while without
sdma ecc. So this patch correct this.
This version brings along following fixes:
- Block SubVP on displays that have pixclk > 1800Mhz
- Block SubVP high refresh when VRR active fixed
- Enforce 60us prefetch for 200Mhz DCFCLK modes
- Check Vactive for VRR active for FPO + Vactive
- Add symclk workaround during disable link output
- Show the DCN/DCE version in the log
- Add additional pstate registers to HW state query
Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lin.Cao [Mon, 8 May 2023 09:28:41 +0000 (17:28 +0800)]
drm/amdgpu: Fix vram recover doesn't work after whole GPU reset (v2)
v1: Vmbo->shadow is used to back vram bo up when vram lost. So that we
should set shadow as vmbo->shadow to recover vmbo->bo
v2: Modify if(vmbo->shadow) shadow = vmbo->shadow as if(!vmbo->shadow)
continue;
Fixes: e18aaea733da ("drm/amdgpu: move shadow_list to amdgpu_bo_vm") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Lin.Cao <lincao12@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Horatio Zhang [Thu, 4 May 2023 05:46:12 +0000 (01:46 -0400)]
drm/amdgpu: drop gfx_v11_0_cp_ecc_error_irq_funcs
The gfx.cp_ecc_error_irq is retired in gfx11. In gfx_v11_0_hw_fini still
use amdgpu_irq_put to disable this interrupt, which caused the call trace
in this function.
v2:
- Handle umc and gfx ras cases in separated patch
- Retired the gfx_v11_0_cp_ecc_error_irq_funcs in gfx11
v3:
- Improve the subject and code comments
- Add judgment on gfx11 in the function of amdgpu_gfx_ras_late_init
v4:
- Drop the define of CP_ME1_PIPE_INST_ADDR_INTERVAL and
SET_ECC_ME_PIPE_STATE which using in gfx_v11_0_set_cp_ecc_error_state
- Check cp_ecc_error_irq.funcs rather than ip version for a more
sustainable life
v5:
- Simplify judgment conditions
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Fri, 28 Apr 2023 21:29:02 +0000 (17:29 -0400)]
drm/amd/display: Block SubVP on displays that have pixclk > 1800Mhz
[Description]
- Enabling SubVP on high refresh rate displays had a side effect
of also enabling on high bandwidth displays such as 8K60
- However, these are not validated and should be blocked for
the time being
- Block SubVP on displays that have pix rate > 1800Mhz (includes
8K60 displays)
Reviewed-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Thu, 27 Apr 2023 19:10:41 +0000 (15:10 -0400)]
drm/amd/display: Block SubVP high refresh when VRR active fixed
[Description]
- SubVP high refresh is blocked when VRR is active variable, but
we should also block it for when VRR is active fixed (video use
case)
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Thu, 27 Apr 2023 19:10:13 +0000 (15:10 -0400)]
drm/amd/display: Enforce 60us prefetch for 200Mhz DCFCLK modes
[Description]
- Due to bandwidth / arbitration issues at 200Mhz DCFCLK,
we want to enforce minimum 60us of prefetch to avoid
intermittent underflow issues
- Since 60us prefetch is already enforced for UCLK DPM0,
and many DCFCLK's > 200Mhz are mapped to UCLK DPM1, in
theory there should not be any UCLK DPM regressions by
enforcing greater prefetch
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Wed, 26 Apr 2023 23:33:16 +0000 (19:33 -0400)]
drm/amd/display: Check Vactive for VRR active for FPO + Vactive
[Description]
- For FPO + Vactive cases, we rely on the Vactive display to be at
it's nominal refresh rate because the Vactive pipe may not necessarily
assert P-State allow while it's in VBLANK
- For cases where the Vactive display has a stretched VBLANK due to
VRR, we could underflow when trying to complete an FPO + Vactive
MCLK switch because the FPO display has limited VBLANK time in
waiting for the Vactive display to assert P-State allow naturally
- Block FPO + Vactive if the Vactive display has VRR active (variable
or fixed)
Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Chen [Wed, 26 Apr 2023 20:02:28 +0000 (16:02 -0400)]
drm/amd/display: Add symclk workaround during disable link output
[Why & How]
This is originally a change (9c75891f) in DCN32 because of the lack
of interface to set TX while keeping symclk on. Adding this workaround
to DCN314 will resolve the current issue.
Fixes: 9c75891feef0 ("drm/amd/display: rework recent update PHY state commit") Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
YuBiao Wang [Fri, 5 May 2023 06:35:32 +0000 (14:35 +0800)]
drm/amdgpu: set default num_kcq to 2 under sriov
The number of kernel queues has impact on the latency under sriov
usecase. So to reduce the latency we set the default num_kcq = 2 under
sriov if not set manually.
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guchun Chen [Fri, 5 May 2023 05:20:11 +0000 (13:20 +0800)]
drm/amd/pm: parse pp_handle under appropriate conditions
amdgpu_dpm_is_overdrive_supported is a common API across all
asics, so we should cast pp_handle into correct structure
under different power frameworks.
v2: using return directly to simplify code
v3: SI asic does not carry od_enabled member in pp_handle, and update Fixes tag
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2541 Fixes: eb4900aa4c49 ("drm/amdgpu: Fix kernel NULL pointer dereference in dpm functions") Suggested-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lang Yu [Fri, 5 May 2023 12:14:15 +0000 (20:14 +0800)]
drm/amdgpu: install stub fence into potential unused fence pointers
When using cpu to update page tables, vm update fences are unused.
Install stub fence into these fence pointers instead of NULL
to avoid NULL dereference when calling dma_fence_wait() on them.
Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Lang Yu <Lang.Yu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Show the DCN/DCE version in the log
Some times people send their dmesg log for debugging, and one common
task is to check the modesetting line to catch which DCN/DCE we need to
debug. This commit introduces a simple conversion from the DCN/DCE
version to a string shown in the dmesg log.
Reviewed-by: Hamza Mahfooz <Hamza.Mahfooz@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't move DMABuf attachments for PCIe P2P mappings to the SYSTEM domain
when unmapping. This avoids triggering eviction fences unnecessarily.
Instead do the move to SYSTEM and back to GTT when mapping these
attachments to ensure the SG table gets updated after evictions.
This may still trigger unnecessary evictions if user mode unmaps and
remaps the same BO. However, this is unlikely in real applications.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Eric Huang <jinhuieric.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sung Lee [Fri, 21 Apr 2023 16:03:16 +0000 (12:03 -0400)]
drm/amd/display: Add additional pstate registers to HW state query
[WHY]
These registers would be useful to know when debugging pstate issues.
[HOW]
Add additional registers to hw state query.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Sung Lee <sunglee@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hamza Mahfooz [Tue, 2 May 2023 15:59:08 +0000 (11:59 -0400)]
drm/amdgpu: fix an amdgpu_irq_put() issue in gmc_v9_0_hw_fini()
As made mention of in commit c56edea58c31 ("drm/amdgpu: fix
amdgpu_irq_put call trace in gmc_v10_0_hw_fini") and commit aa6ac247ed7d
("drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini"). It
is meaningless to call amdgpu_irq_put() for gmc.ecc_irq. So, remove it
from gmc_v9_0_hw_fini().
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522 Fixes: c8b5a95b5709 ("drm/amdgpu: Fix desktop freezed after gpu-reset") Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dan Carpenter [Wed, 3 May 2023 15:09:18 +0000 (18:09 +0300)]
drm/amdgpu: unlock the correct lock in amdgpu_gfx_enable_kcq()
We changed which lock we are supposed to take but this error path
was accidentally over looked so it still drops the old lock.
Fixes: def799c6596d ("drm/amdgpu: add multi-xcc support to amdgpu_gfx interfaces (v4)") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 27 Apr 2023 18:32:11 +0000 (14:32 -0400)]
drm/amdgpu: drop unused function
amdgpu_discovery_get_ip_version() has not been used since
commit c40bdfb2ffa4 ("drm/amdgpu: fix incorrect VCN revision in SRIOV")
so drop it.
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 27 Apr 2023 18:09:33 +0000 (14:09 -0400)]
drm/amdgpu: drop invalid IP revision
This was already fixed and dropped in:
commit baf3f8f37406 ("drm/amdgpu: handle SRIOV VCN revision parsing")
commit c40bdfb2ffa4 ("drm/amdgpu: fix incorrect VCN revision in SRIOV")
But seems to have been accidently been left around in a merge.
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: drop redundant sched job cleanup when cs is aborted
Once command submission failed due to userptr invalidation in
amdgpu_cs_submit, legacy code will perform cleanup of scheduler
job. However, it's not needed at all, as former commit has integrated
job cleanup stuff into amdgpu_job_free. Otherwise, because of double
free, a NULL pointer dereference will occur in such scenario.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2457 Fixes: f7d66fb2ea43 ("drm/amdgpu: cleanup scheduler job initialization v2") Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The following checkpatch errors & warning is removed.
ERROR: else should follow close brace '}'
ERROR: trailing statements should be on next line
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Possible repeated word: 'Fences'
WARNING: Missing a blank line after declarations
WARNING: braces {} are not necessary for single statement blocks
WARNING: Comparisons should place the constant on the right side of the test
WARNING: printk() should include KERN_<LEVEL> facility level
Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: set gfx9 onwards APU atomics support to be true
APUs w/ gfx9 onwards doesn't reply on PCIe atomics, rather
it is internal path w/ native atomic support. Set have_atomics_support
to true.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Lang Yu <lang.yu@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Arnd Bergmann [Mon, 1 May 2023 14:31:53 +0000 (16:31 +0200)]
drm/amd/display: mark amdgpu_dm_connector_funcs_force static
A global function without a header prototype has made it into
linux-next during the merge window:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:6339:6: error: no previous prototype for 'amdgpu_dm_connector_funcs_force' [-Werror=missing-prototypes]
Mark the function static instead, as there are no other
callers outside this file.
Fixes: 0ba4a784a145 ("drm/amd/display: implement force function in amdgpu_dm_connector_funcs") Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202304251640.JClqTim9-lkp@intel.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd: Downgrade message about watermarks table after s0i3 to debug
This message shows up on s0i3 resume for DCN31 and DCN314 platforms but
it has been decided that this flow won't be changed and the message is
expected behavior.
Downgrade the message to debug.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>