Matthew Auld [Fri, 12 Apr 2024 11:31:46 +0000 (12:31 +0100)]
drm/xe/vm: drop vm->destroy_work
Now that we no longer grab the usm.lock mutex (which might sleep) it
looks like it should be safe to directly perform xe_vm_free when vm
refcount reaches zero, instead of punting that off to some worker.
Matthew Auld [Fri, 12 Apr 2024 11:31:45 +0000 (12:31 +0100)]
drm/xe/vm: prevent UAF with asid based lookup
The asid is only erased from the xarray when the vm refcount reaches
zero, however this leads to potential UAF since the xe_vm_get() only
works on a vm with refcount != 0. Since the asid is allocated in the vm
create ioctl, rather erase it when closing the vm, prior to dropping the
potential last ref. This should also work when user closes driver fd
without explicit vm destroy.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1594 Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: <stable@vger.kernel.org> # v6.8+ Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412113144.259426-4-matthew.auld@intel.com
Matthew Auld [Fri, 12 Apr 2024 15:03:02 +0000 (16:03 +0100)]
drm/xe/stolen: lower the default alignment
No need to be so aggressive here. The upper layers will already apply
the needed alignment, plus some allocations might wish to skip it. Main
issue is that we might want to have start/end bias range which doesn't
match the default alignment which is rejected by the allocator.
Michal Wajdeczko [Mon, 15 Apr 2024 17:39:37 +0000 (19:39 +0200)]
drm/xe/pf: Add support to configure SR-IOV VFs
To run correctly, each Virtual Function must be provisioned with
some chunk of shared hardware or firmware resources (like GGTT,
device memory, GuC doorbell IDs, GuC context IDs) and scheduling
parameters (execution quantum or preemption timeout).
All resources assigned to VFs must be excluded from the PF driver
use and may require some additional preparation steps (like setup
of the LMTT or update of the GGTT PTE). Those provisioning details
must be then sent to the GuC firmware as most of those details
will be shared later with the VF drivers during their boot.
Add basic functions to provision VFs with all hardware resources
or scheduling parameters. We will use them shortly in upcoming
patches either in manual provisioning over debugfs, exposed to the
advanced users, or automatic provisioning done by PF driver during
VFs enabling.
Michal Wajdeczko [Mon, 15 Apr 2024 17:39:36 +0000 (19:39 +0200)]
drm/xe/pf: Add SR-IOV PF specific early GT initialization
The PF driver must maintain additional GT level data per each VF.
This additional per-VF data will be added in upcoming patches and
will include: provisioning configuration (like GGTT space or LMEM
allocation sizes or scheduling parameters), monitoring thresholds
and counters, and more.
As number of supported VFs varies across platforms use flexible
array where first entry will contain metadata for the PF itself
(if such configuration parameter is applicable for the PF) and
all remaining entries will contain data for potential VFs.
Michal Wajdeczko [Mon, 15 Apr 2024 17:39:35 +0000 (19:39 +0200)]
drm/xe/guc: Add PF2GUC_UPDATE_VF_CFG to ABI
In upcoming patches the PF driver will add support to change VFs
configuration and will need to use PF2GUC_UPDATE_VF_CFG messages.
Add necessary definitions to our GuC firmware ABI header.
Definitions of the GuC VF Configuration KLVs used by this action
are already present in abi/guc_klvs_abi.h
Michal Wajdeczko [Mon, 15 Apr 2024 17:39:34 +0000 (19:39 +0200)]
drm/xe: Add xe_ttm_vram_get_avail
The PF driver will need to know size of the remaining available
VRAM to estimate fair VRAM allocations that could be used across
all VFs in automatic VFs provisioning mode. Add helper function
for that. We will use it in upcoming patch.
Michal Wajdeczko [Mon, 15 Apr 2024 17:39:33 +0000 (19:39 +0200)]
drm/xe: Allow to assign GGTT region to the VF
VF's drivers can't modify GGTT PTEs except the range explicitly
assigned by the PF driver. To allow hardware enforcement of this
requirement, each GGTT PTE has a field with the VF number that
identifies which VF can modify that particular GGTT PTE entry.
Only PF driver can modify this field and PF driver shall do that
before VF drivers will be loaded. Add function to prepare PTEs.
Since it will be used only by the PF driver, make it available
only for CONFIG_PCI_IOV=y.
Michal Wajdeczko [Mon, 15 Apr 2024 17:39:32 +0000 (19:39 +0200)]
drm/xe: Add helper to format SR-IOV function name
While the GuC firmware and the Xe driver are using VF identifier
VFID(0) to represent the Physical Function, we should avoid using
"VF0" name and use proper "PF" name in all user facing messages
related to the Physical Function and use "VFn" name only when
referrinf to the true Virtual Function. Add simple helper to get
properly formatted function name based on the function number.
Generate the mask of enabled L3 banks for the GT. It is stored with the
rest of the GT topology in a consistent representation across platforms.
For now the L3 bank mask is just printed in the log for developers to
easily figure out the fusing characteristics of machines that they are
trying to debug issues on. Later it can be used to replace existing code
in the driver that requires the L3 bank count (not mask). Also the mask
can easily be exposed to user space in a new query if needed.
v2: Better naming of variable and function (Matt Roper)
Michal Wajdeczko [Wed, 10 Apr 2024 17:03:38 +0000 (19:03 +0200)]
drm/xe/pf: Add support to configure GuC SR-IOV policies
There are few knobs inside GuC firmware to control VFs scheduling.
Add basic functions to support their reconfigurations.
We will start using them shortly once we prepare debugfs.
Michal Wajdeczko [Wed, 10 Apr 2024 17:03:37 +0000 (19:03 +0200)]
drm/xe/guc: Add helpers for GuC KLVs
Many of the GuC actions use KLVs to pass additional parameters or
configuration data. Add few helper functions for better reporting
any information related to KLVs.
Michal Wajdeczko [Wed, 10 Apr 2024 17:03:36 +0000 (19:03 +0200)]
drm/xe/guc: Add PF2GUC_UPDATE_VGT_POLICY to ABI
In upcoming patches the PF driver will add support to change GuC
policies and will need to use PF2GUC_UPDATE_VGT_POLICY messages.
Add necessary definitions to our GuC firmware ABI header.
Michal Wajdeczko [Wed, 10 Apr 2024 17:03:35 +0000 (19:03 +0200)]
drm/xe/pf: Introduce helper functions for use by PF
PF driver will maintain VF's configuration data mostly on the
GT level, but some internal data is located at the device level.
To allow easy access to that data from the GT level functions, and
to minimize code duplications, introduce set of helper functions
and macros for explicit use by the PF driver.
Michal Wajdeczko [Wed, 10 Apr 2024 17:03:34 +0000 (19:03 +0200)]
drm/xe/pf: Introduce mutex to protect VFs configurations
PF driver will maintain configurations and resources for every VF
and this data could span multiple tiles and/or GTs. Prepare mutex
to protect data that we will add in upcoming patches.
Oak Zeng [Fri, 12 Apr 2024 09:52:37 +0000 (15:22 +0530)]
drm/xe: Use hmm_range_fault to populate user pages
This is an effort to unify hmmptr (aka system allocator)
and userptr code. hmm_range_fault is used to populate
a virtual address range for both hmmptr and userptr,
instead of hmmptr using hmm_range_fault and userptr
using get_user_pages_fast.
This also aligns with AMD gpu driver's behavior. In
long term, we plan to put some common helpers in this
area to drm layer so it can be re-used by different
vendors.
-v1
use the function with parameter to confirm whether lock is
acquired by the caller or needs to be acquired in hmm_range_fault.
Oak Zeng [Fri, 12 Apr 2024 09:52:36 +0000 (15:22 +0530)]
drm/xe: Introduce helper to populate userptr
Introduce a helper function xe_userptr_populate_range to populate
a userptr range. This functions calls hmm_range_fault to read
CPU page tables and populate all pfns/pages of this virtual address
range. For system memory page, dma-mapping is performed
to get a dma-address which can be used later for GPU to access pages.
v1: Address review comments:
separate a npage_in_range function (Matt)
reparameterize function xe_userptr_populate_range function (Matt)
move mmu_interval_read_begin() call into while loop (Thomas)
s/mark_range_accessed/xe_mark_range_accessed (Thomas)
use set_page_dirty_lock (vs set_page_dirty) (Thomas)
move a few checking in xe_vma_userptr_pin_pages to hmm.c (Matt)
v2: Remove device private page support. Only support system
pages for now. use dma-map-sg rather than dma-map-page (Matt/Thomas)
v3: Address review comments:
Squash patch "drm/xe: Introduce a helper to free sg table" to current
patch (Matt)
start and end addresses are already page aligned (Matt)
Do mmap_read_lock and mmap_read_unlock for hmm_range_fault incase of
non system allocator call. (Matt)
Drop kthread_use_mm and kthread_unuse_mm. (Matt)
No need of kernel-doc for static functions.(Matt)
Modify function names. (Matt)
Free sgtable incase of dma_map_sgtable failure.(Matt)
Modify loop for hmm_range_fault.(Matt)
v4: Remove the dummy function for xe_hmm_userptr_populate_range
since CONFIG_HMM_MIRROR is needed. (Matt)
Change variable names start/end to userptr_start/userptr_end.(Matt)
v5: Remove device private page support info from commit message. Since
the patch doesn't support device page handling. (Thomas)
Signed-off-by: Oak Zeng <oak.zeng@intel.com> Co-developed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Thomas Hellström <thomas.hellstrom@intel.com> Cc: Brian Welty <brian.welty@intel.com> Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412095237.1048599-2-himal.prasad.ghimiray@intel.com
This will remove devcoredump from file system and free its resources
during driver unload.
This fix the driver unload after gpu hang happened, otherwise this
it would report that Xe KMD is still in use and it would leave the
kernel in a state that Xe KMD can't be unload without a reboot.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jonathan Cavitt <jonathan.cavitt@intel.com> Acked-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240409200206.108452-2-jose.souza@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
It is useful for modules that do not want to keep coredump available
after its unload.
Otherwise, the coredump would only be removed after DEVCD_TIMEOUT
seconds.
A recent change added a use of xe_wa_oob.h without adding the file that
uses it to uses_generated_oob, which means xe_wa_oob.h does not get
properly generated before attempting to build the object file:
LINK resolve_btfids
CC [M] drivers/gpu/drm/xe/xe_guc_ads.o
drivers/gpu/drm/xe/xe_guc_ads.c:10:10: fatal error: generated/xe_wa_oob.h: No such file or directory
10 | #include <generated/xe_wa_oob.h>
| ^~~~~~~~~~~~~~~~~~~~~~~
After adding '$(obj)/xe_guc_ads.o' to uses_generated_oob, xe_wa_oob.h is
always generated before building the file, resulting in no errors:
LINK resolve_btfids
HOSTCC drivers/gpu/drm/xe/xe_gen_wa_oob
GEN xe_wa_oob.c xe_wa_oob.h
CC [M] drivers/gpu/drm/xe/xe_guc_ads.o
drm/xe: re-order lmem init check and wait for initialization to complete
Lmem init check should be done only after pcode initialization
status is complete. Move lmem init check after pcode status
check. Also wait for a short while after pcode status check
to allow completion of the task.
Failing to do so, can lead to aborting the module load
leaving the system unusable. Wait until the lmem initialization
is complete within a timeout (60s) or till the user aborts.
v2: use bool as return type
re-order the code comment (Rodrigo)
add comment for deferring probe (Himal)
drm/xe: check pcode init status only on root gt of root tile
The root tile indicates the pcode initialization is complete
when all tiles have completed their initialization.
So the mailbox can be polled only on the root tile.
Check pcode init status only on root tile and move it to
device probe early as root tile is initialized there.
Also make similar changes in resume paths.
v2: add lock/unlocked version of pcode_mailbox_rw
to allow pcode init to be called in device
early probe (Rodrigo)
v3: add code description about using root tile
change function names to xe_pcode_probe_early
and xe_pcode_init (Rodrigo)
drm/bridge: imx8mp-hdmi-pvi: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
drm/xe: Add proper detection of the SR-IOV PF mode
SR-IOV PF mode detection is based on PCI capability as reported by
the PCI dev_is_pf() function and additionally on 'max_vfs' module
parameter which could be also used to disable PF capability even
if SR-IOV PF capability is reported by the hardware.
We want to have an option to limit the number of the VFs that the
PF driver will be able to manage. With this limit set to zero we
will also have a way to completely disable the PF functionality.
Since we currently don't support SR-IOV on any platform, we start
with this limit set to zero by default.
We may leave pat.ops unset when running on brand new platform or
when running as a VF. While the former is unlikely, the latter
is valid (future) use case and will cause NPD when someone will
try to dump PAT settings by debugfs.
It's better to check pointer to pat.ops instead of specific .dump
hook, as we have this hook always defined for every .ops variant.
drm/xe/xe2hpg: Remove extra allocation of CCS pages for dgfx
On Xe2 dGPU, compression is only supported with VRAM. When copying from
VRAM -> system memory the KMD uses mapping with uncompressed PAT
so the copy in system memory is guaranteed to be uncompressed.
When restoring such buffers from system memory -> VRAM the KMD can't
easily know which pages were originally compressed, so we always use
uncompressed -> uncompressed here.
so this means that there's no need for extra CCS storage on such
platforms.
Matt Roper [Mon, 8 Apr 2024 17:05:39 +0000 (22:35 +0530)]
drm/xe/bmg: Program an additional discrete-specific PAT setting
Discrete Xe2 platforms require programming of one additional row of PAT
settings which controls the access characteristics for PPGTT and LMTT
page tables. Integrated GPUs do not need this programming and will
leave the register at its hardware default value.
Matt Roper [Mon, 8 Apr 2024 17:05:37 +0000 (22:35 +0530)]
drm/xe/bmg: Add BMG platform definition
BMG is a discrete GPU based on the Xe2 architecture.
No device ids are bound to the BMG platform descriptor yet.
BMG device ids will be added once we have all the basic required
platform enabling patches landed.
v2: Removed device ids, deferring it to a later patch
v3: Squash in compat header IS_BATTLEMAGE() patch. (Lucas)
Enable GuC Wa_14019882105 to block interrupts during C6 flow
when the memory path has been blocked
v2: Make helper function generic and name it as
guc_waklv_enable_simple (John Harrison)
v3: Make warning descriptive (John Harrison)
v4: s/drm_WARN/xe_gt_WARN/ (Michal)
To prevent running out of bits, new workaround (w/a) enable flags are
being added via a KLV system instead of a 32 bit flags word.
v2: GuC version check > 70.10 is not needed as base line xe doesnot
support anything below < 70.19
v3: Use 64 bit ggtt address for future
compatibility (John Harrison/Daniele)
v4: %s/PAGE_SIZE/SZ_4K/ (Michal)
Matthew Brost [Fri, 5 Apr 2024 21:16:31 +0000 (14:16 -0700)]
drm/xe: Always capture exec queues on snapshot
Always capture exec queues on snapshot regardless if exec queue has
pending jobs or not. Having jobs or not does indicate whether the exec
queue capture is useful.
Example bugs that would not be easily detected by skipping capture when
pending job list is empty:
- Jobs pending on exec queue have dependencies
- Leaking exec queue refs
- GuC protocol issues (i.e. losing G2H)
In addition to above bugs, in general it just useful to see every exec
queue registered with the GuC and its state.
Francois Dugast [Fri, 29 Mar 2024 12:44:03 +0000 (12:44 +0000)]
drm/xe/uapi: Restore flags VM_BIND_FLAG_READONLY and VM_BIND_FLAG_IMMEDIATE
The commit 84a1ed5e6756 ("drm/xe/uapi: Remove unused flags") is partially
reverted. At the time, flags not used by user space were removed during
cleanup. Some flags now needed by the compute runtime are brought back in
this commit:
- DRM_XE_VM_BIND_FLAG_READONLY is used to write protect kernel ISA thus
preventing accidental overwrites.
- DRM_XE_VM_BIND_FLAG_IMMEDIATE is used to trigger mapping at the time of
binding in order to prevent faulting at execution time.
The changes in the compute runtime are ready and approved, see link below.
v2: Include a link to the PR in the commit message (Matthew Brost)
v3: Update kernel doc and improve commit message (Lucas De Marchi)
Lucas De Marchi [Mon, 8 Apr 2024 15:13:12 +0000 (08:13 -0700)]
drm/xe: Remove dead clock code
xe_gt_clock_cycles_to_ns() is not called from anywhere after PMU
handling was removed in commit 90a8b23f9b85 ("drm/xe/pmu: Remove PMU
from Xe till uapi is finalized"). Drop it.
drm: bridge: cdns-mhdp8546: Fix possible null pointer dereference
In cdns_mhdp_atomic_enable(), the return value of drm_mode_duplicate() is
assigned to mhdp_state->current_mode, and there is a dereference of it in
drm_mode_set_name(), which will lead to a NULL pointer dereference on
failure of drm_mode_duplicate().
Fix this bug add a check of mhdp_state->current_mode.
Lucas De Marchi [Fri, 5 Apr 2024 20:07:11 +0000 (13:07 -0700)]
drm/xe/display: Fix double mutex initialization
All of these mutexes are already initialized by the display side since
commit 3fef3e6ff86a ("drm/i915: move display mutex inits to display
code"), so the xe shouldn´t initialize them.
On current platforms supported firmwares, like GuC and HuC, must
be loaded by the PF driver. Mark those firmwares as 'preloaded'
so we will skip fetching and loading them on the VF drivers but
still correctly report them as 'running'.
The GuC submission cleanup code may depend on the GuC ID manager,
thus we can't initialize it after registering a submission cleanup
action, as reverse cleanup sequence will destroy GuC ID manager
prior to a call to guc_submit_fini().
Move GuC ID manager initialization up, right after managed mutex
initialization, to have it available during guc_submit_fini().
Douglas Anderson [Mon, 25 Mar 2024 21:56:27 +0000 (14:56 -0700)]
drm-panel: If drm_panel_dp_aux_backlight() fails, don't fail panel probe
If we're using the AUX channel for eDP backlight and it fails to probe
for some reason, let's _not_ fail the panel probe.
At least one case where we could fail to init the backlight is because
of a dead or physically missing panel. As talked about in detail in
the earlier patch in this series, ("drm/panel-edp: If we fail to
powerup/get EDID, use conservative timings"), this can cause the
entire system's display pipeline to fail to come up and that's
non-ideal.
If we fail to init the backlight for some transitory reason, we should
dig in and see if there's a way to fix this (perhaps retries?). Even
in that case, though, having a panel whose backlight is stuck at 100%
(the default, at least in the panel Samsung ATNA33XC20 I tested) is
better than having no panel at all.
Douglas Anderson [Mon, 25 Mar 2024 21:56:26 +0000 (14:56 -0700)]
drm/panel-edp: If we fail to powerup/get EDID, use conservative timings
If at boot we fail to power up the eDP panel (most often happens if
the eDP panel never asserts HPD to us) or if we are unable to read the
EDID at bootup to figure out the panel's ID then let's use the
conservative eDP panel powerup/powerdown timings but _not_ fail the
probe.
It might seem strange to _not_ fail the probe in this case since we
were unable to powerup the panel and confirm it's there. However,
there is a reason to do this. Specifically, if we fail to probe the
panel then it really throws the whole display pipeline for loop. Most
DRM subsystems are written so that they wait until all components
(including the panel) have probed before they set everything up. When
the panel doesn't come up then this never happens. As a side effect of
not setting everything up then other display adapters don't get
initialized. As a practical example, I can see that if I open up a
sc7180-trogdor based Chromebook that's using the generic "edp-panel"
and unplug the eDP panel that it causes the _external_ DP monitor not
to function. This is obviously bad because it means that a device with
a dead eDP panel becomes e-waste when it could instead still be given
useful life with an external display.
NOTES:
- When we fail to probe like this, boot is a bit slow because we try
several times to power the panel up. This doesn't feel horrible
because it'll eventually work and the retries are known to help
bring some panels up.
- In the case where we hit the condition of failing to power up, the
display will likely _never_ have a chance to work again until
reboot. Once the panel-edp pm_runtime resume function fails it
doesn't ever seem to retry. This is probably for the best given that
we don't have any real timing/modes. eDP isn't expected to be
"hotplugged" so this makes some sense.
- It turns out that this makes panel-edp behave more similarly for
users of the generic "edp-panel" compatible string and the old fixed
panel compatible string. With the old fixed panel compatible string
we don't talk to the panel during probe so we'd actually behave much
the same way that we'll now behave for the generic "edp-panel".
Douglas Anderson [Mon, 25 Mar 2024 21:56:25 +0000 (14:56 -0700)]
drm/panel-edp: Abstract out function to set conservative timings
If we're using the generic "edp-panel" compatible string and we fail
to detect an eDP panel then we fall back to conservative timings for
powering up and powering down the panel. Abstract out the function for
setting these timings so it can be used in future patches.
No functional change expected--just code movement.
Jeffrey Hugo [Fri, 22 Mar 2024 17:57:30 +0000 (11:57 -0600)]
accel/qaic: Add fifo queued debugfs
When debugging functional issues with workload input processing, it is
useful to know if requests are backing up in the fifo, or perhaps
getting stuck elsewhere. To answer the question of how many requests are
in the fifo, implement a "queued" debugfs entry per-dbc that returns the
number of pending requests when read.
Jeffrey Hugo [Fri, 22 Mar 2024 17:57:29 +0000 (11:57 -0600)]
accel/qaic: Add fifo size debugfs
Each DMA Bridge Channel (dbc) has a unique configured fifo size which is
specified by the userspace client of that dbc. Since the fifo is
circular, it is useful to know the configured size when debugging
issues.
Add a per-dbc subdirectory in debugfs and in each subdirectory add a
fifo_size entry that will display the size of that dbc's fifo when read.
Jeffrey Hugo [Fri, 22 Mar 2024 17:57:28 +0000 (11:57 -0600)]
accel/qaic: Add bootlog debugfs
During the boot process of AIC100, the bootloaders (PBL and SBL) log
messages to device RAM. During SBL, if the host opens the QAIC_LOGGING
channel, SBL will offload the contents of the log buffer to the host,
and stream any new messages that SBL logs.
This log of the boot process can be very useful for an initial triage of
any boot related issues. For example, if SBL rejects one of the runtime
firmware images for a validation failure, SBL will log a reason why.
Add the ability of the driver to open the logging channel, receive the
messages, and store them. Also define a debugfs entry called "bootlog"
by hooking into the DRM debugfs framework. When the bootlog debugfs
entry is read, the current contents of the log that the host is caching
is displayed to the user. The driver will retain the cache until it
detects that the device has rebooted. At that point, the cache will be
freed, and the driver will wait for a new log. With this scheme, the
driver will only have a cache of the log from the current device boot.
Note that if the driver initializes a device and it is already in the
runtime state (QSM), no bootlog will be available through this mechanism
because the driver and SBL have not communicated.
Maxime Ripard [Wed, 3 Apr 2024 10:56:20 +0000 (12:56 +0200)]
drm/bridge: dw-hdmi: Make DRM_DW_HDMI selectable
Commit c0e0f139354c ("drm: Make drivers depends on DRM_DW_HDMI") turned
select dependencies into depends on ones. However, DRM_DW_HDMI was not
manually selectable which resulted in no way to enable the drivers that
were now depending on it.
Maxime Ripard [Wed, 3 Apr 2024 10:56:19 +0000 (12:56 +0200)]
drm/display: Select DRM_KMS_HELPER for DP helpers
The DisplayPort helpers rely on some
(__drm_atomic_helper_private_obj_duplicate_state,
drm_kms_helper_hotplug_event) helpers found in files compiled by
DRM_KMS_HELPER.
Prior to commit d674858ff979 ("drm/display: Make all helpers visible and
switch to depends on"), DRM_DISPLAY_DP_HELPER was only selectable so it
wasn't really a big deal. However, since that commit, it's now something
that can be enabled as is, and since there's no expressed dependency
with DRM_KMS_HELPER, it can break too.
Since DRM_KMS_HELPER is a selectable option for now, let's select it for
DRM_DISPLAY_DP_HELPER.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202404021556.0JVcNC13-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202404021700.LbyYZGFd-lkp@intel.com/ Fixes: d674858ff979 ("drm/display: Make all helpers visible and switch to depends on") Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240403-fix-dw-hdmi-kconfig-v1-1-afbc4a835c38@kernel.org
Core Changes:
- Clarify how optional wait_hpd_asserted is.
- Shuffle Kconfig names around.
Driver Changes:
- Assorted build fixes for panthor, imagination,
- Add AUO B120XAN01.0 panels.
- Assorted small fixes to panthor, panfrost.
drm-misc-next for v6.10:
UAPI Changes:
- Move some nouveau magic constants to uapi.
Cross-subsystem Changes:
- Move drm-misc to gitlab and freedesktop hosting.
- Add entries for panfrost.
Core Changes:
- Improve placement for TTM bo's in idle/busy handling.
- Improve drm/bridge init ordering.
- Add CONFIG_DRM_WERROR, and use W=1 for drm.
- Assorted documentation updates.
- Make more (drm and driver) headers self-contained and add header
guards.
- Grab reservation lock in pin/unpin callbacks.
- Fix reservation lock handling for vmap.
- Add edp and edid panel matching, use it to fix a nearly identical
panel.
Driver Changes:
- Add drm/panthor driver and assorted fixes.
- Assorted small fixes to xlnx, panel-edp, tidss, ci, nouveau,
panel and bridge drivers.
- Add Samsung s6e3fa7, BOE NT116WHM-N44, CMN N116BCA-EA1,
CrystalClear CMT430B19N00, Startek KD050HDFIA020-C020A,
powertip PH128800T006-ZHC01 panels.
- Fix console for omapdrm.
While we don't have the full flow protection when devcoredump
is accessed after device unbind. Let's at least for now
protect against null dereference:
[ 422.766508] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 423.119584] RIP: 0010:xe_vm_snapshot_free+0x30/0x180 [xe]
While at it, I also fixed a non-standard code-declaration block
on the similar function of xe_guc_submit.
v2: - Use IS_ERR_OR_NULL (Nirmoy)
- Expand to other functions
Both the exynos and rockchip drivers ran into link failures after
a Kconfig cleanup:
aarch64-linux-ld: drivers/gpu/drm/exynos/exynos_dp.o: in function `exynos_dp_resume':
exynos_dp.c:(.text+0xc0): undefined reference to `analogix_dp_resume'
aarch64-linux-ld: drivers/gpu/drm/exynos/exynos_dp.o: in function `exynos_dp_suspend':
exynos_dp.c:(.text+0xf4): undefined reference to `analogix_dp_suspend'
x86_64-linux-ld: drivers/gpu/drm/rockchip/cdn-dp-core.o: in function `cdn_dp_connector_mode_valid':
cdn-dp-core.c:(.text+0x13a): undefined reference to `drm_dp_bw_code_to_link_rate'
x86_64-linux-ld: cdn-dp-core.c:(.text+0x148): undefined reference to `drm_dp_bw_code_to_link_rate'
x86_64-linux-ld: drivers/gpu/drm/rockchip/cdn-dp-core.o: in function `cdn_dp_check_link_status':
cdn-dp-core.c:(.text+0x1396): undefined reference to `drm_dp_channel_eq_ok'
In both cases, the problem is that ROCKCHIP_CDN_DP and DRM_EXYNOS_DP
are 'bool' symbols that depend on the the 'tristate' DRM_DISPLAY_HELPER
symbol, but end up not working when the SoC specific part is built-in
but the helper is in a loadable module.
Use the same trick that DRM_ROCKCHIP already uses for the EXTCON
dependency and disallow DP support when it would not work.
Adam Ford [Tue, 5 Mar 2024 00:48:57 +0000 (18:48 -0600)]
drm/bridge: adv7511: Allow IRQ to share GPIO pins
The IRQ registration currently assumes that the GPIO is dedicated
to it, but that may not necessarily be the case. If the board has
another device sharing the GPIO, it won't be registered and the
hot-plug detect fails to function.
Currently, the handler reads two registers and blindly
assumes one of them caused the interrupt and returns IRQ_HANDLED
unless there is an error. In order to properly do this, the IRQ
handler needs to check if it needs to handle the IRQ and return
IRQ_NONE if there is nothing to handle. With the check added
and the return code properly indicating whether or not it there
was an IRQ, the IRQF_SHARED can be set to share a GPIO IRQ.
V2: Add check to see if there is IRQ data to handle
Matthew Brost [Mon, 1 Apr 2024 22:19:11 +0000 (15:19 -0700)]
drm/xe: Use ordered wq for preempt fence waiting
Preempt fences can sleep waiting for an exec queue suspend operation to
complete. If the system_unbound_wq is used for waiting and the number of
waiters exceeds max_active this will result in other users of the
system_unbound_wq getting starved. Use a device private work queue for
preempt fences to avoid starvation of the system_unbound_wq.
Even though suspend operations can complete out-of-order, all suspend
operations within a VM need to complete before the preempt rebind worker
can start. With that, use a device private ordered wq for preempt fence
waiting.
v2:
- Add comment about cleanup on failure (Matt R)
- Update commit message (Lucas)
drm/panthor: Don't return NULL from panthor_vm_get_heap_pool()
The kernel doc says this function returns either a valid pointer
or an ERR_PTR(), but in practice this function can return NULL if
create=false. Fix the function to match the doc (return
ERR_PTR(-ENOENT) instead of NULL) and adjust all call-sites
accordingly.
projects / linux.git / log