--- /dev/null
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2024 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
+
+# The script is adopted to work with the Microchip KSZ switch driver.
+
+ETH_FCS_LEN=4
+
+WAIT_TIME=1
+NUM_NETIFS=4
+REQUIRE_JQ="yes"
+REQUIRE_MZ="yes"
+STABLE_MAC_ADDRS=yes
+NETIF_CREATE=no
+lib_dir=$(dirname $0)/../../../net/forwarding
+source $lib_dir/tc_common.sh
+source $lib_dir/lib.sh
+
+require_command dcb
+
+h1=${NETIFS[p1]}
+swp1=${NETIFS[p2]}
+swp2=${NETIFS[p3]}
+h2=${NETIFS[p4]}
+
+H1_IPV4="192.0.2.1"
+H2_IPV4="192.0.2.2"
+H1_IPV6="2001:db8:1::1"
+H2_IPV6="2001:db8:1::2"
+
+# On h1_ and h2_create do not set IP addresses to avoid interaction with the
+# system, to keep packet counters clean.
+h1_create()
+{
+ simple_if_init $h1
+ sysctl_set net.ipv6.conf.${h1}.disable_ipv6 1
+ # Get the MAC address of the interface to use it with mausezahn
+ h1_mac=$(ip -j link show dev ${h1} | jq -e '.[].address')
+}
+
+h1_destroy()
+{
+ sysctl_restore net.ipv6.conf.${h1}.disable_ipv6
+ simple_if_fini $h1
+}
+
+h2_create()
+{
+ simple_if_init $h2
+ sysctl_set net.ipv6.conf.${h2}.disable_ipv6 1
+ h2_mac=$(ip -j link show dev ${h2} | jq -e '.[].address')
+}
+
+h2_destroy()
+{
+ sysctl_restore net.ipv6.conf.${h2}.disable_ipv6
+ simple_if_fini $h2
+}
+
+switch_create()
+{
+ ip link set ${swp1} up
+ ip link set ${swp2} up
+ sysctl_set net.ipv6.conf.${swp1}.disable_ipv6 1
+ sysctl_set net.ipv6.conf.${swp2}.disable_ipv6 1
+
+ # Ports should trust VLAN PCP even with vlan_filtering=0
+ ip link add br0 type bridge
+ ip link set ${swp1} master br0
+ ip link set ${swp2} master br0
+ ip link set br0 up
+ sysctl_set net.ipv6.conf.br0.disable_ipv6 1
+}
+
+switch_destroy()
+{
+ sysctl_restore net.ipv6.conf.${swp2}.disable_ipv6
+ sysctl_restore net.ipv6.conf.${swp1}.disable_ipv6
+
+ ip link del br0
+}
+
+setup_prepare()
+{
+ vrf_prepare
+
+ h1_create
+ h2_create
+ switch_create
+}
+
+cleanup()
+{
+ pre_cleanup
+
+ h2_destroy
+ h1_destroy
+ switch_destroy
+
+ vrf_cleanup
+}
+
+set_apptrust_order()
+{
+ local if_name=$1
+ local order=$2
+
+ dcb apptrust set dev ${if_name} order ${order}
+}
+
+# Function to extract a specified field from a given JSON stats string
+extract_network_stat() {
+ local stats_json=$1
+ local field_name=$2
+
+ echo $(echo "$stats_json" | jq -r "$field_name")
+}
+
+run_test()
+{
+ local test_name=$1;
+ local apptrust_order=$2;
+ local port_prio=$3;
+ local dscp_ipv=$4;
+ local dscp=$5;
+ local have_vlan=$6;
+ local pcp_ipv=$7;
+ local vlan_pcp=$8;
+ local ip_v6=$9
+
+ local rx_ipv
+ local tx_ipv
+
+ RET=0
+
+ # Send some packet to populate the switch MAC table
+ $MZ ${h2} -a ${h2_mac} -b ${h1_mac} -p 64 -t icmp echores -c 1
+
+ # Based on the apptrust order, set the expected Internal Priority values
+ # for the RX and TX paths.
+ if [ "${apptrust_order}" == "" ]; then
+ echo "Apptrust order not set."
+ rx_ipv=${port_prio}
+ tx_ipv=${port_prio}
+ elif [ "${apptrust_order}" == "dscp" ]; then
+ echo "Apptrust order is DSCP."
+ rx_ipv=${dscp_ipv}
+ tx_ipv=${dscp_ipv}
+ elif [ "${apptrust_order}" == "pcp" ]; then
+ echo "Apptrust order is PCP."
+ rx_ipv=${pcp_ipv}
+ tx_ipv=${pcp_ipv}
+ elif [ "${apptrust_order}" == "pcp dscp" ]; then
+ echo "Apptrust order is PCP DSCP."
+ if [ ${have_vlan} -eq 1 ]; then
+ rx_ipv=$((dscp_ipv > pcp_ipv ? dscp_ipv : pcp_ipv))
+ tx_ipv=${pcp_ipv}
+ else
+ rx_ipv=${dscp_ipv}
+ tx_ipv=${dscp_ipv}
+ fi
+ else
+ RET=1
+ echo "Error: Unknown apptrust order ${apptrust_order}"
+ log_test "${test_name}"
+ return
+ fi
+
+ # Most/all? of the KSZ switches do not provide per-TC counters. There
+ # are only tx_hi and rx_hi counters, which are used to count packets
+ # which are considered as high priority and most likely not assigned
+ # to the queue 0.
+ # On the ingress path, packets seem to get high priority status
+ # independently of the DSCP or PCP global mapping. On the egress path,
+ # the high priority status is assigned based on the DSCP or PCP global
+ # map configuration.
+ # The thresholds for the high priority status are not documented, but
+ # it seems that the switch considers packets as high priority on the
+ # ingress path if detected Internal Priority is greater than 0. On the
+ # egress path, the switch considers packets as high priority if
+ # detected Internal Priority is greater than 1.
+ if [ ${rx_ipv} -ge 1 ]; then
+ local expect_rx_high_prio=1
+ else
+ local expect_rx_high_prio=0
+ fi
+
+ if [ ${tx_ipv} -ge 2 ]; then
+ local expect_tx_high_prio=1
+ else
+ local expect_tx_high_prio=0
+ fi
+
+ # Use ip tool to get the current switch packet counters. ethool stats
+ # need to be recalculated to get the correct values.
+ local swp1_stats=$(ip -s -j link show dev ${swp1})
+ local swp2_stats=$(ip -s -j link show dev ${swp2})
+ local swp1_rx_packets_before=$(extract_network_stat "$swp1_stats" \
+ '.[0].stats64.rx.packets')
+ local swp1_rx_bytes_before=$(extract_network_stat "$swp1_stats" \
+ '.[0].stats64.rx.bytes')
+ local swp2_tx_packets_before=$(extract_network_stat "$swp2_stats" \
+ '.[0].stats64.tx.packets')
+ local swp2_tx_bytes_before=$(extract_network_stat "$swp2_stats" \
+ '.[0].stats64.tx.bytes')
+ local swp1_rx_hi_before=$(ethtool_stats_get ${swp1} "rx_hi")
+ local swp2_tx_hi_before=$(ethtool_stats_get ${swp2} "tx_hi")
+
+ # Assamble the mausezahn command based on the test parameters
+ # For the testis with ipv4 or ipv6, use icmp response packets,
+ # to avoid interaction with the system, to keep packet counters
+ # clean.
+ if [ ${ip_v6} -eq 0 ]; then
+ local ip="-a ${h1_mac} -b ${h2_mac} -A ${H1_IPV4} \
+ -B ${H2_IPV4} -t icmp unreach,code=1,dscp=${dscp}"
+ else
+ local ip="-6 -a ${h1_mac} -b ${h2_mac} -A ${H1_IPV6} \
+ -B ${H2_IPV6} -t icmp6 type=1,code=0,dscp=${dscp}"
+ fi
+
+ if [ ${have_vlan} -eq 1 ]; then
+ local vlan_pcp_opt="-Q ${vlan_pcp}:0"
+ else
+ local vlan_pcp_opt=""
+ fi
+ $MZ ${h1} ${ip} -c ${PING_COUNT} -d 10msec ${vlan_pcp_opt}
+
+ # Wait until the switch packet counters are updated
+ sleep 6
+
+ local swp1_stats=$(ip -s -j link show dev ${swp1})
+ local swp2_stats=$(ip -s -j link show dev ${swp2})
+
+ local swp1_rx_packets_after=$(extract_network_stat "$swp1_stats" \
+ '.[0].stats64.rx.packets')
+ local swp1_rx_bytes_after=$(extract_network_stat "$swp1_stats" \
+ '.[0].stats64.rx.bytes')
+ local swp2_tx_packets_after=$(extract_network_stat "$swp2_stats" \
+ '.[0].stats64.tx.packets')
+ local swp2_tx_bytes_after=$(extract_network_stat "$swp2_stats" \
+ '.[0].stats64.tx.bytes')
+
+ local swp1_rx_packets_diff=$((${swp1_rx_packets_after} - \
+ ${swp1_rx_packets_before}))
+ local swp2_tx_packets_diff=$((${swp2_tx_packets_after} - \
+ ${swp2_tx_packets_before}))
+
+ local swp1_rx_hi_after=$(ethtool_stats_get ${swp1} "rx_hi")
+ local swp2_tx_hi_after=$(ethtool_stats_get ${swp2} "tx_hi")
+
+ # Test if any packets were received on swp1, we will rx before and after
+ if [ ${swp1_rx_packets_diff} -lt ${PING_COUNT} ]; then
+ echo "Not expected amount of received packets on ${swp1}"
+ echo "before ${swp1_rx_packets_before} after ${swp1_rx_packets_after}"
+ RET=1
+ fi
+
+ # Test if any packets were transmitted on swp2, we will tx before and after
+ if [ ${swp2_tx_packets_diff} -lt ${PING_COUNT} ]; then
+ echo "Not expected amount of transmitted packets on ${swp2}"
+ echo "before ${swp2_tx_packets_before} after ${swp2_tx_packets_after}"
+ RET=1
+ fi
+
+ # tx/rx_hi counted in bytes. So, we need to compare the difference in bytes
+ local swp1_rx_bytes_diff=$(($swp1_rx_bytes_after - $swp1_rx_bytes_before))
+ local swp2_tx_bytes_diff=$(($swp2_tx_bytes_after - $swp2_tx_bytes_before))
+ local swp1_rx_hi_diff=$(($swp1_rx_hi_after - $swp1_rx_hi_before))
+ local swp2_tx_hi_diff=$(($swp2_tx_hi_after - $swp2_tx_hi_before))
+
+ if [ ${expect_rx_high_prio} -eq 1 ]; then
+ swp1_rx_hi_diff=$((${swp1_rx_hi_diff} - \
+ ${swp1_rx_packets_diff} * ${ETH_FCS_LEN}))
+ if [ ${swp1_rx_hi_diff} -ne ${swp1_rx_bytes_diff} ]; then
+ echo "Not expected amount of high priority packets received on ${swp1}"
+ echo "RX hi diff: ${swp1_rx_hi_diff}, expected RX bytes diff: ${swp1_rx_bytes_diff}"
+ RET=1
+ fi
+ else
+ if [ ${swp1_rx_hi_diff} -ne 0 ]; then
+ echo "Unexpected amount of high priority packets received on ${swp1}"
+ echo "RX hi diff: ${swp1_rx_hi_diff}, expected 0"
+ RET=1
+ fi
+ fi
+
+ if [ ${expect_tx_high_prio} -eq 1 ]; then
+ swp2_tx_hi_diff=$((${swp2_tx_hi_diff} - \
+ ${swp2_tx_packets_diff} * ${ETH_FCS_LEN}))
+ if [ ${swp2_tx_hi_diff} -ne ${swp2_tx_bytes_diff} ]; then
+ echo "Not expected amount of high priority packets transmitted on ${swp2}"
+ echo "TX hi diff: ${swp2_tx_hi_diff}, expected TX bytes diff: ${swp2_tx_bytes_diff}"
+ RET=1
+ fi
+ else
+ if [ ${swp2_tx_hi_diff} -ne 0 ]; then
+ echo "Unexpected amount of high priority packets transmitted on ${swp2}"
+ echo "TX hi diff: ${swp2_tx_hi_diff}, expected 0"
+ RET=1
+ fi
+ fi
+
+ log_test "${test_name}"
+}
+
+run_test_dscp()
+{
+ # IPv4 test
+ run_test "$1" "$2" "$3" "$4" "$5" 0 0 0 0
+ # IPv6 test
+ run_test "$1" "$2" "$3" "$4" "$5" 0 0 0 1
+}
+
+run_test_dscp_pcp()
+{
+ # IPv4 test
+ run_test "$1" "$2" "$3" "$4" "$5" 1 "$6" "$7" 0
+ # IPv6 test
+ run_test "$1" "$2" "$3" "$4" "$5" 1 "$6" "$7" 1
+}
+
+port_default_prio_get()
+{
+ local if_name=$1
+ local prio
+
+ prio="$(dcb -j app show dev ${if_name} default-prio | \
+ jq '.default_prio[]')"
+ if [ -z "${prio}" ]; then
+ prio=0
+ fi
+
+ echo ${prio}
+}
+
+test_port_default()
+{
+ local orig_apptrust=$(port_get_default_apptrust ${swp1})
+ local orig_prio=$(port_default_prio_get ${swp1})
+ local apptrust_order=""
+
+ RET=0
+
+ # Make sure no other priority sources will interfere with the test
+ set_apptrust_order ${swp1} "${apptrust_order}"
+
+ for val in $(seq 0 7); do
+ dcb app replace dev ${swp1} default-prio ${val}
+ if [ $val -ne $(port_default_prio_get ${swp1}) ]; then
+ RET=1
+ break
+ fi
+
+ run_test_dscp "Port-default QoS classification, prio: ${val}" \
+ "${apptrust_order}" ${val} 0 0
+ done
+
+ set_apptrust_order ${swp1} "${orig_apptrust}"
+ if [[ "$orig_apptrust" != "$(port_get_default_apptrust ${swp1})" ]]; then
+ RET=1
+ fi
+
+ dcb app replace dev ${swp1} default-prio ${orig_prio}
+ if [ $orig_prio -ne $(port_default_prio_get ${swp1}) ]; then
+ RET=1
+ fi
+
+ log_test "Port-default QoS classification"
+}
+
+port_get_default_apptrust()
+{
+ local if_name=$1
+
+ dcb -j apptrust show dev ${if_name} | jq -r '.order[]' | \
+ tr '\n' ' ' | xargs
+}
+
+test_port_apptrust()
+{
+ local original_dscp_prios_swp1=$(get_dscp_prios ${swp1})
+ local orig_apptrust=$(port_get_default_apptrust ${swp1})
+ local orig_port_prio=$(port_default_prio_get ${swp1})
+ local order_variants=("pcp dscp" "dscp" "pcp")
+ local apptrust_order
+ local port_prio
+ local dscp_prio
+ local pcp_prio
+ local dscp
+ local pcp
+
+ RET=0
+
+ # First, test if apptrust configuration as taken by the kernel
+ for order in "${order_variants[@]}"; do
+ set_apptrust_order ${swp1} "${order}"
+ if [[ "$order" != "$(port_get_default_apptrust ${swp1})" ]]; then
+ RET=1
+ break
+ fi
+ done
+
+ log_test "Apptrust, supported variants"
+
+ # To test if the apptrust configuration is working as expected, we need
+ # to set DSCP priorities for the switch port.
+ init_dscp_prios "${swp1}" "${original_dscp_prios_swp1}"
+
+ # Start with a simple test where all apptrust sources are disabled
+ # default port priority is 0, DSCP priority is mapped to 7.
+ # No high priority packets should be received or transmitted.
+ port_prio=0
+ dscp_prio=7
+ dscp=4
+
+ dcb app replace dev ${swp1} default-prio ${port_prio}
+ dcb app replace dev ${swp1} dscp-prio ${dscp}:${dscp_prio}
+
+ apptrust_order=""
+ set_apptrust_order ${swp1} "${apptrust_order}"
+ # Test with apptrust sources disabled, Packets should get port default
+ # priority which is 0
+ run_test_dscp "Apptrust, all disabled. DSCP-prio ${dscp}:${dscp_prio}" \
+ "${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp}
+
+ apptrust_order="pcp"
+ set_apptrust_order ${swp1} "${apptrust_order}"
+ # If PCP is enabled, packets should get PCP priority, which is not
+ # set in this test (no VLAN tags are present in the packet). No high
+ # priority packets should be received or transmitted.
+ run_test_dscp "Apptrust, PCP enabled. DSCP-prio ${dscp}:${dscp_prio}" \
+ "${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp}
+
+ apptrust_order="dscp"
+ set_apptrust_order ${swp1} "${apptrust_order}"
+ # If DSCP is enabled, packets should get DSCP priority which is set to 7
+ # in this test. High priority packets should be received and transmitted.
+ run_test_dscp "Apptrust, DSCP enabled. DSCP-prio ${dscp}:${dscp_prio}" \
+ "${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp}
+
+ apptrust_order="pcp dscp"
+ set_apptrust_order ${swp1} "${apptrust_order}"
+ # If PCP and DSCP are enabled, PCP would have higher apptrust priority
+ # so packets should get PCP priority. But in this test VLAN PCP is not
+ # set, so it should get DSCP priority which is set to 7. High priority
+ # packets should be received and transmitted.
+ run_test_dscp "Apptrust, PCP and DSCP are enabled. DSCP-prio ${dscp}:${dscp_prio}" \
+ "${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp}
+
+ # If VLAN PCP is set, it should have higher apptrust priority than DSCP
+ # so packets should get VLAN PCP priority. Send packets with VLAN PCP
+ # set to 0, DSCP set to 7. Packets should get VLAN PCP priority.
+ # No high priority packets should be transmitted. Due to nature of the
+ # switch, high priority packets will be received.
+ pcp_prio=0
+ pcp=0
+ run_test_dscp_pcp "Apptrust, PCP and DSCP are enabled. PCP ${pcp_prio}, DSCP-prio ${dscp}:${dscp_prio}" \
+ "${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp} ${pcp_prio} ${pcp}
+
+ # If VLAN PCP is set to 7, it should have higher apptrust priority than
+ # DSCP so packets should get VLAN PCP priority. Send packets with VLAN
+ # PCP set to 7, DSCP set to 7. Packets should get VLAN PCP priority.
+ # High priority packets should be received and transmitted.
+ pcp_prio=7
+ pcp=7
+ run_test_dscp_pcp "Apptrust, PCP and DSCP are enabled. PCP ${pcp_prio}, DSCP-prio ${dscp}:${dscp_prio}" \
+ "${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp} ${pcp_prio} ${pcp}
+ # Now make sure that the switch is able to handle the case where DSCP
+ # priority is set to 0 and PCP priority is set to 7. Packets should get
+ # PCP priority. High priority packets should be received and transmitted.
+ dscp_prio=0
+ dcb app replace dev ${swp1} dscp-prio ${dscp}:${dscp_prio}
+ run_test_dscp_pcp "Apptrust, PCP and DSCP are enabled. PCP ${pcp_prio}, DSCP-prio ${dscp}:${dscp_prio}" \
+ "${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp} ${pcp_prio} ${pcp}
+ # If both VLAN PCP and DSCP are set to 0, packets should get 0 priority.
+ # No high priority packets should be received or transmitted.
+ pcp_prio=0
+ pcp=0
+ run_test_dscp_pcp "Apptrust, PCP and DSCP are enabled. PCP ${pcp_prio}, DSCP-prio ${dscp}:${dscp_prio}" \
+ "${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp} ${pcp_prio} ${pcp}
+
+ # Restore original priorities
+ if ! restore_priorities "${swp1}" "${original_dscp_prios_swp1}"; then
+ RET=1
+ fi
+
+ set_apptrust_order ${swp1} "${orig_apptrust}"
+ if [ "$orig_apptrust" != "$(port_get_default_apptrust ${swp1})" ]; then
+ RET=1
+ fi
+
+ dcb app replace dev ${swp1} default-prio ${orig_port_prio}
+ if [ $orig_port_prio -ne $(port_default_prio_get ${swp1}) ]; then
+ RET=1
+ fi
+
+ log_test "Apptrust, restore original settings"
+}
+
+# Function to get current DSCP priorities
+get_dscp_prios() {
+ local if_name=$1
+ dcb -j app show dev ${if_name} | jq -c '.dscp_prio'
+}
+
+# Function to set a specific DSCP priority on a device
+replace_dscp_prio() {
+ local if_name=$1
+ local dscp=$2
+ local prio=$3
+ dcb app replace dev ${if_name} dscp-prio ${dscp}:${prio}
+}
+
+# Function to compare DSCP maps
+compare_dscp_maps() {
+ local old_json=$1
+ local new_json=$2
+ local dscp=$3
+ local prio=$4
+
+ # Create a modified old_json with the expected change for comparison
+ local modified_old_json=$(echo "$old_json" |
+ jq --argjson dscp $dscp --argjson prio $prio \
+ 'map(if .[0] == $dscp then [$dscp, $prio] else . end)' |
+ tr -d " \n")
+
+ # Compare new_json with the modified_old_json
+ if [[ "$modified_old_json" == "$new_json" ]]; then
+ return 0
+ else
+ return 1
+ fi
+}
+
+# Function to set DSCP priorities
+set_and_verify_dscp() {
+ local port=$1
+ local dscp=$2
+ local new_prio=$3
+
+ local old_prios=$(get_dscp_prios $port)
+
+ replace_dscp_prio "$port" $dscp $new_prio
+
+ # Fetch current settings and compare
+ local current_prios=$(get_dscp_prios $port)
+ if ! compare_dscp_maps "$old_prios" "$current_prios" $dscp $new_prio; then
+ echo "Error: Unintended changes detected in DSCP map for $port after setting DSCP $dscp to $new_prio."
+ return 1
+ fi
+ return 0
+}
+
+# Function to restore original priorities
+restore_priorities() {
+ local port=$1
+ local original_prios=$2
+
+ echo "Removing test artifacts for $port"
+ local current_prios=$(get_dscp_prios $port)
+ local prio_str=$(echo "$current_prios" |
+ jq -r 'map("\(.[0]):\(.[1])") | join(" ")')
+ dcb app del dev $port dscp-prio $prio_str
+
+ echo "Restoring original DSCP priorities for $port"
+ local restore_str=$(echo "$original_prios" |
+ jq -r 'map("\(.[0]):\(.[1])") | join(" ")')
+ dcb app add dev $port dscp-prio $restore_str
+
+ local current_prios=$(get_dscp_prios $port)
+ if [[ "$original_prios" != "$current_prios" ]]; then
+ echo "Error: Failed to restore original DSCP priorities for $port"
+ return 1
+ fi
+ return 0
+}
+
+# Initialize DSCP priorities. Set them to predictable values for testing.
+init_dscp_prios() {
+ local port=$1
+ local original_prios=$2
+
+ echo "Removing any existing DSCP priority mappins for $port"
+ local prio_str=$(echo "$original_prios" |
+ jq -r 'map("\(.[0]):\(.[1])") | join(" ")')
+ dcb app del dev $port dscp-prio $prio_str
+
+ # Initialize DSCP priorities list
+ local dscp_prios=""
+ for dscp in {0..63}; do
+ dscp_prios+=("$dscp:0")
+ done
+
+ echo "Setting initial DSCP priorities map to 0 for $port"
+ dcb app add dev $port dscp-prio ${dscp_prios[@]}
+}
+
+# Main function to test global DSCP map across specified ports
+test_global_dscp_map() {
+ local ports=("$swp1" "$swp2")
+ local original_dscp_prios_port0=$(get_dscp_prios ${ports[0]})
+ local orig_apptrust=$(port_get_default_apptrust ${swp1})
+ local orig_port_prio=$(port_default_prio_get ${swp1})
+ local apptrust_order="dscp"
+ local port_prio=0
+ local dscp_prio
+ local dscp
+
+ RET=0
+
+ set_apptrust_order ${swp1} "${apptrust_order}"
+ dcb app replace dev ${swp1} default-prio ${port_prio}
+
+ # Initialize DSCP priorities
+ init_dscp_prios "${ports[0]}" "$original_dscp_prios_port0"
+
+ # Loop over each DSCP index
+ for dscp in {0..63}; do
+ # and test each Internal Priority value
+ for dscp_prio in {0..7}; do
+ # do it for each port. This is to test if the global DSCP map
+ # is accessible from all ports.
+ for port in "${ports[@]}"; do
+ if ! set_and_verify_dscp "$port" $dscp $dscp_prio; then
+ RET=1
+ fi
+ done
+
+ # Test if the DSCP priority is correctly applied to the packets
+ run_test_dscp "DSCP (${dscp}) QoS classification, prio: ${dscp_prio}" \
+ "${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp}
+ if [ ${RET} -eq 1 ]; then
+ break
+ fi
+ done
+ done
+
+ # Restore original priorities
+ if ! restore_priorities "${ports[0]}" "${original_dscp_prios_port0}"; then
+ RET=1
+ fi
+
+ set_apptrust_order ${swp1} "${orig_apptrust}"
+ if [[ "$orig_apptrust" != "$(port_get_default_apptrust ${swp1})" ]]; then
+ RET=1
+ fi
+
+ dcb app replace dev ${swp1} default-prio ${orig_port_prio}
+ if [ $orig_port_prio -ne $(port_default_prio_get ${swp1}) ]; then
+ RET=1
+ fi
+
+ log_test "DSCP global map"
+}
+
+trap cleanup EXIT
+
+ALL_TESTS="
+ test_port_default
+ test_port_apptrust
+ test_global_dscp_map
+"
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
projects / linux.git / commitdiff