arm64: dts: samsung-coreprimevelte: add vibrator

diff --git a/arch/arm64/boot/dts/marvell/pxa1908-samsung-coreprimevelte.dts b/arch/arm64/boot/dts/marvell/pxa1908-samsung-coreprimevelte.dts
index 6f729bf6e7e76d96e545138eee611b7570aa7806..7b868aa60b90f9f9a726108214298764bff3c534 100644 (file)
--- a/arch/arm64/boot/dts/marvell/pxa1908-samsung-coreprimevelte.dts
+++ b/arch/arm64/boot/dts/marvell/pxa1908-samsung-coreprimevelte.dts
@@ -134,6 +134,15 @@
                powerdown-gpios = <&gpio 57 GPIO_ACTIVE_HIGH>;
                reset-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>;
        };
+
+       vibrator {
+               compatible = "pwm-vibrator";
+               pwm-names = "enable";
+               pwms = <&pwm 100000>;
+               enable-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&vibrator_pin>;
+       };
 };
 
 &smmu {
@@ -457,7 +466,8 @@
                pinctrl-single,drive-strength = <0x1000 0x1800>;
                pinctrl-single,bias-pullup = <0x8000 0xc000 0x8000 0xc000>;
                pinctrl-single,bias-pulldown = <0xa000 0xa000 0 0xa000>;
-               pinctrl-single,input-schmitt = <0x40 0 0x40 0x70>;
+               pinctrl-single,input-schmitt = <0 0x30>;
+               pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
                pinctrl-single,low-power-mode = <0 0x388>;
        };
 };

diff --git a/arch/arm64/boot/dts/marvell/pxa1908.dtsi b/arch/arm64/boot/dts/marvell/pxa1908.dtsi
index cf2b9109688ce560eec8a1397251ead68d78a239..94fe11dd77b4535793cd342217a26ea043390ad4 100644 (file)
--- a/arch/arm64/boot/dts/marvell/pxa1908.dtsi
+++ b/arch/arm64/boot/dts/marvell/pxa1908.dtsi
@@ -195,6 +195,13 @@
                                };
                        };
 
+                       pwm: pwm@1ac00 {
+                               compatible = "marvell,pxa250-pwm";
+                               reg = <0x1ac00 0x10>;
+                               #pwm-cells = <1>;
+                               clocks = <&apbc PXA1908_CLK_PWM3>;
+                       };
+
                        pmx: pinmux@1e000 {
                                compatible = "marvell,pxa1908-padconf", "pinconf-single";
                                reg = <0x1e000 0x330>;