unsigned int force_lls;
bool notify_dpia_hr_bw;
bool enable_ips_visual_confirm;
+ unsigned int sharpen_policy;
+ unsigned int scale_to_sharpness_policy;
};
spl_in->h_active = pipe_ctx->plane_res.scl_data.h_active;
spl_in->v_active = pipe_ctx->plane_res.scl_data.v_active;
+
+ spl_in->debug.sharpen_policy = (enum sharpen_policy)pipe_ctx->stream->ctx->dc->debug.sharpen_policy;
+ spl_in->debug.scale_to_sharpness_policy =
+ (enum scale_to_sharpness_policy)pipe_ctx->stream->ctx->dc->debug.scale_to_sharpness_policy;
+
/* Check if it is stream is in fullscreen and if its HDR.
* Use this to determine sharpness levels
*/
return skip_easf;
}
+/* Check if video is in fullscreen mode */
+static bool spl_is_video_fullscreen(struct spl_in *spl_in)
+{
+ if (spl_is_yuv420(spl_in->basic_in.format) && spl_in->is_fullscreen)
+ return true;
+ return false;
+}
+
static bool spl_get_isharp_en(struct spl_in *spl_in,
struct spl_scratch *spl_scratch)
{
int vratio = 0;
int hratio = 0;
struct spl_taps taps = spl_scratch->scl_data.taps;
+ bool fullscreen = spl_is_video_fullscreen(spl_in);
/* Return if adaptive sharpness is disabled */
if (spl_in->adaptive_sharpness.enable == false)
// Scaling is up to 1:1 (no scaling) or upscaling
/*
- * Apply sharpness to all RGB surfaces and to
- * NV12/P010 surfaces
+ * Apply sharpness to RGB and YUV (NV12/P010)
+ * surfaces based on policy setting
*/
+ if (!spl_is_yuv420(spl_in->basic_in.format) &&
+ (spl_in->debug.sharpen_policy == SHARPEN_YUV))
+ return enable_isharp;
+ else if ((spl_is_yuv420(spl_in->basic_in.format) && !fullscreen) &&
+ (spl_in->debug.sharpen_policy == SHARPEN_RGB_FULLSCREEN_YUV))
+ return enable_isharp;
/*
* Apply sharpness if supports horizontal taps 4,6 AND
struct adaptive_sharpness adp_sharpness, bool enable_isharp,
enum linear_light_scaling lls_pref, enum spl_pixel_format format,
const struct spl_scaler_data *data, struct spl_fixed31_32 ratio,
- enum system_setup setup)
+ enum system_setup setup, enum scale_to_sharpness_policy scale_to_sharpness_policy)
{
/* Turn off sharpener if not required */
if (!enable_isharp) {
return;
}
+ spl_build_isharp_1dlut_from_reference_curve(ratio, setup, adp_sharpness,
+ scale_to_sharpness_policy);
+ dscl_prog_data->isharp_delta = spl_get_pregen_filter_isharp_1D_lut(setup);
+ dscl_prog_data->sharpness_level = adp_sharpness.sharpness_level;
+
dscl_prog_data->isharp_en = 1; // ISHARP_EN
// Set ISHARP_NOISEDET_MODE if htaps = 6-tap
if (data->taps.h_taps == 6) {
dscl_prog_data->isharp_lba.base_seg[5] = 0; // ISHARP LBA PWL for Seg 5. BASE value in U0.6 format
}
-
- spl_build_isharp_1dlut_from_reference_curve(ratio, setup, adp_sharpness);
- dscl_prog_data->isharp_delta = spl_get_pregen_filter_isharp_1D_lut(setup);
- dscl_prog_data->sharpness_level = adp_sharpness.sharpness_level;
-
// Program the nldelta soft clip values
if (lls_pref == LLS_PREF_YES) {
dscl_prog_data->isharp_nldelta_sclip.enable_p = 0; /* ISHARP_NLDELTA_SCLIP_EN_P */
isharp_scale_ratio = spl_scratch.scl_data.recip_ratios.horz;
spl_set_isharp_data(spl_out->dscl_prog_data, spl_in->adaptive_sharpness, enable_isharp,
- spl_in->lls_pref, spl_in->basic_in.format, data, isharp_scale_ratio, setup);
+ spl_in->lls_pref, spl_in->basic_in.format, data, isharp_scale_ratio, setup,
+ spl_in->debug.scale_to_sharpness_policy);
return res;
}
},
};
+struct scale_ratio_to_sharpness_level_adj sharpness_level_adj[NUM_SHARPNESS_ADJ_LEVELS] = {
+ {1125, 1000, 0},
+ {11, 10, 1},
+ {1075, 1000, 2},
+ {105, 100, 3},
+ {1025, 1000, 4},
+ {1, 1, 5},
+};
+
const uint32_t *spl_get_filter_isharp_1D_lut_0(void)
{
return filter_isharp_1D_lut_0;
return filter_isharp_bs_3tap_64p_s1_12;
}
-static unsigned int spl_calculate_sharpness_level(int discrete_sharpness_level, enum system_setup setup,
- struct spl_sharpness_range sharpness_range)
+static unsigned int spl_calculate_sharpness_level_adj(struct spl_fixed31_32 ratio)
+{
+ int j;
+ struct spl_fixed31_32 ratio_level;
+ struct scale_ratio_to_sharpness_level_adj *lookup_ptr;
+ unsigned int sharpness_level_down_adj;
+
+ /*
+ * Adjust sharpness level based on current scaling ratio
+ *
+ * We have 5 discrete scaling ratios which we will use to adjust the
+ * sharpness level down by 1 as we pass each ratio. The ratios
+ * are
+ *
+ * 1.125 upscale and higher - no adj
+ * 1.100 - under 1.125 - adj level down 1
+ * 1.075 - under 1.100 - adj level down 2
+ * 1.050 - under 1.075 - adj level down 3
+ * 1.025 - under 1.050 - adj level down 4
+ * 1.000 - under 1.025 - adj level down 5
+ *
+ */
+ j = 0;
+ sharpness_level_down_adj = 0;
+ lookup_ptr = sharpness_level_adj;
+ while (j < NUM_SHARPNESS_ADJ_LEVELS) {
+ ratio_level = spl_fixpt_from_fraction(lookup_ptr->ratio_numer,
+ lookup_ptr->ratio_denom);
+ if (ratio.value >= ratio_level.value) {
+ sharpness_level_down_adj = lookup_ptr->level_down_adj;
+ break;
+ }
+ lookup_ptr++;
+ j++;
+ }
+ return sharpness_level_down_adj;
+}
+
+static unsigned int spl_calculate_sharpness_level(struct spl_fixed31_32 ratio,
+ int discrete_sharpness_level, enum system_setup setup,
+ struct spl_sharpness_range sharpness_range,
+ enum scale_to_sharpness_policy scale_to_sharpness_policy)
{
unsigned int sharpness_level = 0;
+ unsigned int sharpness_level_down_adj = 0;
int min_sharpness, max_sharpness, mid_sharpness;
+ /*
+ * Adjust sharpness level if policy requires we adjust it based on
+ * scale ratio. Based on scale ratio, we may adjust the sharpness
+ * level down by a certain number of steps. We will not select
+ * a sharpness value of 0 so the lowest sharpness level will be
+ * 0 or 1 depending on what the min_sharpness is
+ *
+ * If the policy is no required, this code maybe removed at a later
+ * date
+ */
switch (setup) {
case HDR_L:
min_sharpness = sharpness_range.hdr_rgb_min;
max_sharpness = sharpness_range.hdr_rgb_max;
mid_sharpness = sharpness_range.hdr_rgb_mid;
+ if (scale_to_sharpness_policy == SCALE_TO_SHARPNESS_ADJ_ALL)
+ sharpness_level_down_adj = spl_calculate_sharpness_level_adj(ratio);
break;
case HDR_NL:
/* currently no use case, use Non-linear SDR values for now */
min_sharpness = sharpness_range.sdr_yuv_min;
max_sharpness = sharpness_range.sdr_yuv_max;
mid_sharpness = sharpness_range.sdr_yuv_mid;
+ if (scale_to_sharpness_policy >= SCALE_TO_SHARPNESS_ADJ_YUV)
+ sharpness_level_down_adj = spl_calculate_sharpness_level_adj(ratio);
break;
case SDR_L:
default:
min_sharpness = sharpness_range.sdr_rgb_min;
max_sharpness = sharpness_range.sdr_rgb_max;
mid_sharpness = sharpness_range.sdr_rgb_mid;
+ if (scale_to_sharpness_policy == SCALE_TO_SHARPNESS_ADJ_ALL)
+ sharpness_level_down_adj = spl_calculate_sharpness_level_adj(ratio);
break;
}
+ if ((min_sharpness == 0) && (sharpness_level_down_adj >= discrete_sharpness_level))
+ discrete_sharpness_level = 1;
+ else if (sharpness_level_down_adj >= discrete_sharpness_level)
+ discrete_sharpness_level = 0;
+ else
+ discrete_sharpness_level -= sharpness_level_down_adj;
+
int lower_half_step_size = (mid_sharpness - min_sharpness) / 5;
int upper_half_step_size = (max_sharpness - mid_sharpness) / 5;
}
void spl_build_isharp_1dlut_from_reference_curve(struct spl_fixed31_32 ratio, enum system_setup setup,
- struct adaptive_sharpness sharpness)
+ struct adaptive_sharpness sharpness, enum scale_to_sharpness_policy scale_to_sharpness_policy)
{
uint8_t *byte_ptr_1dlut_src, *byte_ptr_1dlut_dst;
struct spl_fixed31_32 sharp_base, sharp_calc, sharp_level;
uint32_t filter_pregen_store[ISHARP_LUT_TABLE_SIZE];
/* Custom sharpnessX1000 value */
- unsigned int sharpnessX1000 = spl_calculate_sharpness_level(sharpness.sharpness_level,
- setup, sharpness.sharpness_range);
+ unsigned int sharpnessX1000 = spl_calculate_sharpness_level(ratio,
+ sharpness.sharpness_level, setup,
+ sharpness.sharpness_range, scale_to_sharpness_policy);
sharp_level = spl_fixpt_from_fraction(sharpnessX1000, 1000);
/*
(filter_isharp_1D_lut_pregen[setup].sharpness_denom == 1000))
return;
-
/*
* Calculate LUT_128_gained with this equation:
*
const uint16_t *spl_get_filter_isharp_wide_6tap_64p(void);
uint16_t *spl_dscl_get_blur_scale_coeffs_64p(int taps);
-struct scale_ratio_to_sharpness_level_lookup {
+#define NUM_SHARPNESS_ADJ_LEVELS 6
+struct scale_ratio_to_sharpness_level_adj {
unsigned int ratio_numer;
unsigned int ratio_denom;
- unsigned int sharpness_numer;
- unsigned int sharpness_denom;
+ unsigned int level_down_adj; /* adjust sharpness level down */
};
struct isharp_1D_lut_pregen {
void spl_set_blur_scale_data(struct dscl_prog_data *dscl_prog_data,
const struct spl_scaler_data *data);
-void spl_build_isharp_1dlut_from_reference_curve(struct spl_fixed31_32 ratio, enum system_setup setup, struct adaptive_sharpness sharpness);
+void spl_build_isharp_1dlut_from_reference_curve(struct spl_fixed31_32 ratio, enum system_setup setup,
+ struct adaptive_sharpness sharpness, enum scale_to_sharpness_policy scale_to_sharpness_policy);
uint32_t *spl_get_pregen_filter_isharp_1D_lut(enum system_setup setup);
#endif /* __DC_SPL_ISHARP_FILTERS_H__ */
LLS_PREF_YES,
LLS_PREF_NO
};
+enum sharpen_policy {
+ SHARPEN_ALWAYS = 0,
+ SHARPEN_YUV = 1,
+ SHARPEN_RGB_FULLSCREEN_YUV = 2
+};
+enum scale_to_sharpness_policy {
+ NO_SCALE_TO_SHARPNESS_ADJ = 0,
+ SCALE_TO_SHARPNESS_ADJ_YUV = 1,
+ SCALE_TO_SHARPNESS_ADJ_ALL = 2
+};
struct spl_funcs {
void (*spl_calc_lb_num_partitions)
(bool alpha_en,
struct spl_debug {
int visual_confirm_base_offset;
int visual_confirm_dpp_offset;
+ enum sharpen_policy sharpen_policy;
+ enum scale_to_sharpness_policy scale_to_sharpness_policy;
};
struct spl_in {
projects / linux.git / commitdiff