From d6949e3f9dc6f2bbc63b1614601291091d1f0347 Mon Sep 17 00:00:00 2001
From: Eric Nelson <eric.nelson@boundarydevices.com>
Date: Thu, 2 Oct 2014 12:16:34 -0700
Subject: [PATCH] nitrogen6x: display: add LDB-WXGA-S for SPWG 1280x800
displays
This patch adds support for LVDS WXGA displays that use the SPWG encoding
standard instead of JEIDA.
No auto-detection is enabled and you must explicitly set the 'panel'
environment variable:
U-Boot > setenv panel LDB-WXGA-S
U-Boot > saveenv && reset
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
---
board/boundary/nitrogen6x/nitrogen6x.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c
index 2200bc7c3b..045f81ecb7 100644
--- a/board/boundary/nitrogen6x/nitrogen6x.c
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -533,6 +533,26 @@ struct display_info_t const displays[] = {{
.vsync_len = 10,
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
+} }, {
+ .bus = 0,
+ .addr = 0,
+ .pixfmt = IPU_PIX_FMT_RGB24,
+ .detect = NULL,
+ .enable = enable_lvds,
+ .mode = {
+ .name = "LDB-WXGA-S",
+ .refresh = 60,
+ .xres = 1280,
+ .yres = 800,
+ .pixclock = 14065,
+ .left_margin = 40,
+ .right_margin = 40,
+ .upper_margin = 3,
+ .lower_margin = 80,
+ .hsync_len = 10,
+ .vsync_len = 10,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED
} }, {
.bus = 2,
.addr = 0x4,
--
2.39.5