From c6dc21c84de0f159a1752c5ebd33cff843f63609 Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@denx.de>
Date: Thu, 13 Mar 2008 14:32:03 +0100
Subject: [PATCH] HMI1001: add support for MPC5200 Rev. B processors.

Signed-off-by: Wolfgang Denk <wd@denx.de>
---
 board/hmi1001/hmi1001.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/board/hmi1001/hmi1001.c b/board/hmi1001/hmi1001.c
index 9fa0e747b9..3ecb74a0c8 100644
--- a/board/hmi1001/hmi1001.c
+++ b/board/hmi1001/hmi1001.c
@@ -147,6 +147,24 @@ long int initdram (int board_type)
 
 #endif /* CFG_RAMBOOT */
 
+	/*
+	 * On MPC5200B we need to set the special configuration delay in the
+	 * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
+	 * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
+	 *
+	 * "The SDelay should be written to a value of 0x00000004. It is
+	 * required to account for changes caused by normal wafer processing
+	 * parameters."
+	 */
+	svr = get_svr();
+	pvr = get_pvr();
+	if ((SVR_MJREV(svr) >= 2) &&
+	    (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
+
+		*(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
+		__asm__ volatile ("sync");
+	}
+
 /*	return dramsize + dramsize2; */
 	return dramsize;
 }
-- 
2.39.5