From: Lukasz Majewski <lukma@denx.de>
Date: Tue, 9 May 2023 14:32:43 +0000 (+0200)
Subject: arm: config: Adjust imx287 based XEA board PMU configuration
X-Git-Url: http://git.dujemihanovic.xyz/repo?a=commitdiff_plain;h=e7c1c0811bc27ff246864773f1aecd4f9200bed8;p=u-boot.git

arm: config: Adjust imx287 based XEA board PMU configuration

This patch adjusts XEA's PMU setup as this board is supposed to be
mainly powered from DCDC_BATT source.

Moreover, in this HW design the VDD_4P2 is not used as well.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
---

diff --git a/configs/imx28_xea_defconfig b/configs/imx28_xea_defconfig
index 06dd6b1f0e..6469e59614 100644
--- a/configs/imx28_xea_defconfig
+++ b/configs/imx28_xea_defconfig
@@ -14,6 +14,9 @@ CONFIG_SPL_DM_SPI=y
 CONFIG_DEFAULT_DEVICE_TREE="imx28-xea"
 CONFIG_SPL_TEXT_BASE=0x1000
 CONFIG_TARGET_XEA=y
+CONFIG_SPL_MXS_PMU_MINIMAL_VDD5V_CURRENT=y
+CONFIG_SPL_MXS_PMU_DISABLE_BATT_CHARGE=y
+# CONFIG_SPL_MXS_PMU_ENABLE_4P2_LINEAR_REGULATOR is not set
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_STACK=0x20000