From: Andrew Davis Date: Tue, 11 Apr 2023 18:25:07 +0000 (-0500) Subject: arm: dts: dm8x: Non-functional changes sync with v6.3-rc6 X-Git-Url: http://git.dujemihanovic.xyz/repo?a=commitdiff_plain;h=1fb69a07bc3d4ddc88a4232d558251169faf3ad0;p=u-boot.git arm: dts: dm8x: Non-functional changes sync with v6.3-rc6 This is a collection of all the whitespace, renames, comment, and other changes that should not change the DT functionality from Linux v6.3-rc6. Signed-off-by: Andrew Davis --- diff --git a/arch/arm/dts/da850-evm.dts b/arch/arm/dts/da850-evm.dts index 7e865bb467..378af9f344 100644 --- a/arch/arm/dts/da850-evm.dts +++ b/arch/arm/dts/da850-evm.dts @@ -52,15 +52,15 @@ enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>; /* lcd_panel_pwr */ panel-info { - ac-bias = <255>; - ac-bias-intrpt = <0>; - dma-burst-sz = <16>; - bpp = <16>; - fdd = <0x80>; - sync-edge = <0>; - sync-ctrl = <1>; - raster-order = <0>; - fifo-th = <0>; + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <16>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <1>; + raster-order = <0>; + fifo-th = <0>; }; display-timings { @@ -265,7 +265,7 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&spi1_pins &spi1_cs0_pin>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p64"; diff --git a/arch/arm/dts/da850-lego-ev3.dts b/arch/arm/dts/da850-lego-ev3.dts index 6d781d5d36..7207d126b3 100644 --- a/arch/arm/dts/da850-lego-ev3.dts +++ b/arch/arm/dts/da850-lego-ev3.dts @@ -22,7 +22,7 @@ stdout-path = &serial1; }; - memory { + memory@c0000000 { device_type = "memory"; reg = <0xc0000000 0x04000000>; }; diff --git a/arch/arm/dts/da850.dtsi b/arch/arm/dts/da850.dtsi index e6e78b88ca..c96f64b904 100644 --- a/arch/arm/dts/da850.dtsi +++ b/arch/arm/dts/da850.dtsi @@ -369,7 +369,7 @@ edma0: edma@0 { compatible = "ti,edma3-tpcc"; /* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */ - reg = <0x0 0x8000>; + reg = <0x0 0x8000>; reg-names = "edma3_cc"; interrupts = <11 12>; interrupt-names = "edma3_ccint", "edma3_ccerrint"; @@ -380,14 +380,14 @@ }; edma0_tptc0: tptc@8000 { compatible = "ti,edma3-tptc"; - reg = <0x8000 0x400>; + reg = <0x8000 0x400>; interrupts = <13>; interrupt-names = "edm3_tcerrint"; power-domains = <&psc0 1>; }; edma0_tptc1: tptc@8400 { compatible = "ti,edma3-tptc"; - reg = <0x8400 0x400>; + reg = <0x8400 0x400>; interrupts = <32>; interrupt-names = "edm3_tcerrint"; power-domains = <&psc0 2>; @@ -395,7 +395,7 @@ edma1: edma@230000 { compatible = "ti,edma3-tpcc"; /* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */ - reg = <0x230000 0x8000>; + reg = <0x230000 0x8000>; reg-names = "edma3_cc"; interrupts = <93 94>; interrupt-names = "edma3_ccint", "edma3_ccerrint"; @@ -406,7 +406,7 @@ }; edma1_tptc0: tptc@238000 { compatible = "ti,edma3-tptc"; - reg = <0x238000 0x400>; + reg = <0x238000 0x400>; interrupts = <95>; interrupt-names = "edm3_tcerrint"; power-domains = <&psc1 21>; @@ -543,7 +543,7 @@ power-domains = <&psc1 17>; status = "disabled"; }; - ecap0: ecap@306000 { + ecap0: pwm@306000 { compatible = "ti,da850-ecap", "ti,am3352-ecap", "ti,am33xx-ecap"; #pwm-cells = <3>; @@ -553,7 +553,7 @@ power-domains = <&psc1 20>; status = "disabled"; }; - ecap1: ecap@307000 { + ecap1: pwm@307000 { compatible = "ti,da850-ecap", "ti,am3352-ecap", "ti,am33xx-ecap"; #pwm-cells = <3>; @@ -563,7 +563,7 @@ power-domains = <&psc1 20>; status = "disabled"; }; - ecap2: ecap@308000 { + ecap2: pwm@308000 { compatible = "ti,da850-ecap", "ti,am3352-ecap", "ti,am33xx-ecap"; #pwm-cells = <3>; @@ -627,7 +627,7 @@ cppi41dma: dma-controller@201000 { compatible = "ti,da830-cppi41"; - reg = <0x201000 0x1000 + reg = <0x201000 0x1000 0x202000 0x1000 0x204000 0x4000>; reg-names = "controller", diff --git a/arch/arm/dts/dm8168-evm.dts b/arch/arm/dts/dm8168-evm.dts index 2a457c943e..70255ab259 100644 --- a/arch/arm/dts/dm8168-evm.dts +++ b/arch/arm/dts/dm8168-evm.dts @@ -116,19 +116,19 @@ label = "X-Loader"; reg = <0 0x80000>; }; - partition@0x80000 { + partition@80000 { label = "U-Boot"; reg = <0x80000 0x1c0000>; }; - partition@0x1c0000 { + partition@1c0000 { label = "Environment"; reg = <0x240000 0x40000>; }; - partition@0x280000 { + partition@280000 { label = "Kernel"; reg = <0x280000 0x500000>; }; - partition@0x780000 { + partition@780000 { label = "Filesystem"; reg = <0x780000 0xf880000>; }; @@ -139,7 +139,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mcspi1_pins>; - m25p80@0 { + flash@0 { compatible = "w25x32"; spi-max-frequency = <48000000>; reg = <0>; diff --git a/arch/arm/dts/dm816x.dtsi b/arch/arm/dts/dm816x.dtsi index ae2d9386fc..c4a8653b7f 100644 --- a/arch/arm/dts/dm816x.dtsi +++ b/arch/arm/dts/dm816x.dtsi @@ -63,8 +63,11 @@ ranges; prcm: prcm@48180000 { - compatible = "ti,dm816-prcm"; + compatible = "ti,dm816-prcm", "simple-bus"; reg = <0x48180000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48180000 0x4000>; prcm_clocks: clocks { #address-cells = <1>; @@ -86,6 +89,8 @@ dm816x_pinmux: pinmux@800 { compatible = "pinctrl-single"; reg = <0x800 0x50a>; + #address-cells = <1>; + #size-cells = <0>; #pinctrl-cells = <1>; pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0xf>; @@ -121,6 +126,8 @@ }; scrm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; }; scrm_clockdomains: clockdomains { @@ -228,7 +235,7 @@ #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <12>; - mbox_dsp: mbox_dsp { + mbox_dsp: mbox-dsp { ti,mbox-tx = <3 0 0>; ti,mbox-rx = <0 0 0>; }; @@ -364,7 +371,7 @@ ti,timer-pwm; }; - uart1: uart@48020000 { + uart1: serial@48020000 { compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart1"; reg = <0x48020000 0x2000>; @@ -374,7 +381,7 @@ dma-names = "tx", "rx"; }; - uart2: uart@48022000 { + uart2: serial@48022000 { compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart2"; reg = <0x48022000 0x2000>; @@ -384,7 +391,7 @@ dma-names = "tx", "rx"; }; - uart3: uart@48024000 { + uart3: serial@48024000 { compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart3"; reg = <0x48024000 0x2000>;