select CPU_ARM926EJS
select GPIO_EXTRA_HEADER
-config TARGET_SPEAR320
- bool "Support spear320"
- select BOARD_EARLY_INIT_F
- select CPU_ARM926EJS
- select GPIO_EXTRA_HEADER
- select PL011_SERIAL
- imply CMD_SAVES
-
config TARGET_SPEAR600
bool "Support spear600"
select BOARD_EARLY_INIT_F
source "board/myir/mys_6ulx/Kconfig"
source "board/seeed/npi_imx6ull/Kconfig"
source "board/socionext/developerbox/Kconfig"
-source "board/spear/spear320/Kconfig"
source "board/spear/spear600/Kconfig"
source "board/spear/x600/Kconfig"
source "board/st/stv0991/Kconfig"
periph1_clken = readl(&misc_p->periph1_clken);
-#if defined(CONFIG_SPEAR3XX)
- periph1_clken |= MISC_GPT2ENB;
-#elif defined(CONFIG_SPEAR600)
+#if defined(CONFIG_SPEAR600)
periph1_clken |= MISC_GPT3ENB;
#endif
#ifdef CONFIG_DISPLAY_CPUINFO
int print_cpuinfo(void)
{
-#if defined(CONFIG_SPEAR320)
- printf("CPU: SPEAr320\n");
-#elif defined(CONFIG_SPEAR600)
+#if defined(CONFIG_SPEAR600)
printf("CPU: SPEAr600\n");
#else
#error CPU not supported in spear platform
return SOC_SPEAR600_BA;
else
return SOC_SPEAR_NA;
-#if defined(CONFIG_SPEAR320)
- return SOC_SPEAR320;
#endif
}
u32 synth;
/* Prescaler setting */
-#if defined(CONFIG_SPEAR3XX)
- writel(MISC_PRSC_CFG, &misc_regs_p->prsc2_clk_cfg);
- synth = MISC_GPT4SYNTH;
-#elif defined(CONFIG_SPEAR600)
+#if defined(CONFIG_SPEAR600)
writel(MISC_PRSC_CFG, &misc_regs_p->prsc1_clk_cfg);
synth = MISC_GPT3SYNTH;
#else
#define CONFIG_SPEAR_MPMCREGS 100
-#elif defined(CONFIG_SPEAR320)
-#define CONFIG_SYS_FSMC_BASE 0x4C000000
-
-#define CONFIG_SPEAR_EMIBASE 0x40000000
-#define CONFIG_SPEAR_RASBASE 0xB3000000
-
-#define CONFIG_SYS_MACB0_BASE 0xAA000000
-
#endif
#endif /* _ASM_ARCH_HARDWARE_H */
#define SYNTH23 0x00020003
/* PLLx_FRQ value */
-#if defined(CONFIG_SPEAR3XX)
-#define FREQ_332 0xA600010C
-#define FREQ_266 0x8500010C
-#elif defined(CONFIG_SPEAR600)
+#if defined(CONFIG_SPEAR600)
#define FREQ_332 0xA600010F
#define FREQ_266 0x8500010F
#endif
+++ /dev/null
-if TARGET_SPEAR320
-
-config SYS_BOARD
- default "spear320"
-
-config SYS_VENDOR
- default "spear"
-
-config SYS_SOC
- default "spear"
-
-config SYS_CONFIG_NAME
- default "spear3xx_evb"
-
-endif
+++ /dev/null
-SPEAR320 BOARD
-M: Vipin Kumar <vipin.kumar@st.com>
-S: Maintained
-F: board/spear/spear320/
-F: include/configs/spear3xx_evb.h
-F: configs/spear320_defconfig
-
-SPEAR320_NAND BOARD
-#M: -
-S: Maintained
-F: configs/spear320_nand_defconfig
-F: configs/spear320_pnor_defconfig
-F: configs/spear320_usbtty_defconfig
-F: configs/spear320_usbtty_nand_defconfig
-F: configs/spear320_usbtty_pnor_defconfig
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-
-obj-y := spear320.o
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2009
- * Ryan Chen, ST Micoelectronics, ryan.chen@st.com.
- * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
- */
-
-#include <common.h>
-#include <miiphy.h>
-#include <net.h>
-#include <netdev.h>
-#include <nand.h>
-#include <asm/io.h>
-#include <linux/mtd/fsmc_nand.h>
-#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/spr_defs.h>
-#include <asm/arch/spr_misc.h>
-
-#define PLGPIO_SEL_36 0xb3000028
-#define PLGPIO_IO_36 0xb3000038
-
-static struct nand_chip nand_chip[CONFIG_SYS_MAX_NAND_DEVICE];
-
-static void spear_phy_reset(void)
-{
- writel(0x10, PLGPIO_IO_36);
- writel(0x10, PLGPIO_SEL_36);
-}
-
-int board_init(void)
-{
- spear_phy_reset();
- return spear_board_init(MACH_TYPE_SPEAR320);
-}
-
-/*
- * board_nand_init - Board specific NAND initialization
- * @nand: mtd private chip structure
- *
- * Called by nand_init_chip to initialize the board specific functions
- */
-
-void board_nand_init()
-{
- struct misc_regs *const misc_regs_p =
- (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
- struct nand_chip *nand = &nand_chip[0];
-
-#if defined(CONFIG_NAND_FSMC)
- if (((readl(&misc_regs_p->auto_cfg_reg) & MISC_SOCCFGMSK) ==
- MISC_SOCCFG30) ||
- ((readl(&misc_regs_p->auto_cfg_reg) & MISC_SOCCFGMSK) ==
- MISC_SOCCFG31)) {
-
- fsmc_nand_init(nand);
- }
-#endif
-
- return;
-}
-
-int board_eth_init(struct bd_info *bis)
-{
- int ret = 0;
-
-#if defined(CONFIG_ETH_DESIGNWARE)
- u32 interface = PHY_INTERFACE_MODE_MII;
- if (designware_initialize(CONFIG_SPEAR_ETHBASE, interface) >= 0)
- ret++;
-#endif
-#if defined(CONFIG_MACB)
- if (macb_eth_initialize(0, (void *)CONFIG_SYS_MACB0_BASE,
- CONFIG_MACB0_PHY) >= 0)
- ret++;
-#endif
- return ret;
-}
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_CPU_INIT=y
-CONFIG_TARGET_SPEAR320=y
-CONFIG_SYS_TEXT_BASE=0x00700000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_IDENT_STRING="-SPEAr"
-CONFIG_SYS_EXTRA_OPTIONS="SPEAR320"
-CONFIG_BOOTDELAY=1
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock3 rootfstype=jffs2"
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_MISC_INIT_R=y
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_NAND=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xF8040000
-CONFIG_SYS_I2C_DW=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_PHY_GIGE=y
-CONFIG_ETH_DESIGNWARE=y
-CONFIG_MII=y
-CONFIG_CONS_INDEX=0
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_CPU_INIT=y
-CONFIG_TARGET_SPEAR320=y
-CONFIG_SYS_TEXT_BASE=0x00700000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x60000
-CONFIG_IDENT_STRING="-SPEAr"
-CONFIG_SYS_EXTRA_OPTIONS="SPEAR320"
-CONFIG_BOOTDELAY=1
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock7 rootfstype=jffs2"
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_MISC_INIT_R=y
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_NAND=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SYS_I2C_DW=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_PHY_GIGE=y
-CONFIG_ETH_DESIGNWARE=y
-CONFIG_MII=y
-CONFIG_CONS_INDEX=0
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_CPU_INIT=y
-CONFIG_TARGET_SPEAR320=y
-CONFIG_SYS_TEXT_BASE=0x00700000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_IDENT_STRING="-SPEAr"
-CONFIG_SYS_EXTRA_OPTIONS="SPEAR320,FLASH_PNOR"
-CONFIG_BOOTDELAY=1
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock3 rootfstype=jffs2"
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_MISC_INIT_R=y
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_NAND=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0x44060000
-CONFIG_SYS_I2C_DW=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_PHY_GIGE=y
-CONFIG_ETH_DESIGNWARE=y
-CONFIG_MII=y
-CONFIG_CONS_INDEX=0
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_CPU_INIT=y
-CONFIG_TARGET_SPEAR320=y
-CONFIG_SYS_TEXT_BASE=0x00700000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_IDENT_STRING="-SPEAr"
-CONFIG_SYS_EXTRA_OPTIONS="SPEAR320,USBTTY"
-CONFIG_BOOTDELAY=-1
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock3 rootfstype=jffs2"
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_MISC_INIT_R=y
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_NAND=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xF8040000
-CONFIG_SYS_I2C_DW=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_PHY_GIGE=y
-CONFIG_ETH_DESIGNWARE=y
-CONFIG_MII=y
-CONFIG_CONS_INDEX=0
-CONFIG_USB=y
-CONFIG_USB_GADGET=y
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_CPU_INIT=y
-CONFIG_TARGET_SPEAR320=y
-CONFIG_SYS_TEXT_BASE=0x00700000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x60000
-CONFIG_IDENT_STRING="-SPEAr"
-CONFIG_SYS_EXTRA_OPTIONS="SPEAR320,USBTTY"
-CONFIG_BOOTDELAY=-1
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock7 rootfstype=jffs2"
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_MISC_INIT_R=y
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_NAND=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SYS_I2C_DW=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_PHY_GIGE=y
-CONFIG_ETH_DESIGNWARE=y
-CONFIG_MII=y
-CONFIG_CONS_INDEX=0
-CONFIG_USB=y
-CONFIG_USB_GADGET=y
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_CPU_INIT=y
-CONFIG_TARGET_SPEAR320=y
-CONFIG_SYS_TEXT_BASE=0x00700000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_IDENT_STRING="-SPEAr"
-CONFIG_SYS_EXTRA_OPTIONS="SPEAR320,USBTTY,FLASH_PNOR"
-CONFIG_BOOTDELAY=-1
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock3 rootfstype=jffs2"
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_MISC_INIT_R=y
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_NAND=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0x44060000
-CONFIG_SYS_I2C_DW=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_PHY_GIGE=y
-CONFIG_ETH_DESIGNWARE=y
-CONFIG_MII=y
-CONFIG_CONS_INDEX=0
-CONFIG_USB=y
-CONFIG_USB_GADGET=y
config SYS_I2C_DW_ENABLE_STATUS_UNSUPPORTED
bool "DW I2C Enable Status Register not supported"
depends on SYS_I2C_DW && \
- (TARGET_SPEAR320 || TARGET_SPEAR600 || TARGET_X600)
+ (TARGET_SPEAR600 || TARGET_X600)
default y
help
Some versions of the Designware I2C controller do not support the
#define CONFIG_SYS_I2C
#if defined(CONFIG_SPEAR600)
#define CONFIG_SYS_I2C_BASE 0xD0200000
-#elif defined(CONFIG_SPEAR320)
-#define CONFIG_SYS_I2C_BASE 0xD0180000
#endif
#define CONFIG_SYS_I2C_SPEED 400000
#define CONFIG_SYS_I2C_SLAVE 0x02