From: Quentin Schulz Date: Thu, 6 Jun 2024 08:45:34 +0000 (+0200) Subject: rockchip: px30-ringneck: Update SPL_PAD_TO Kconfig option X-Git-Url: http://git.dujemihanovic.xyz/projects?a=commitdiff_plain;h=aefdec52771694dcaac8bcc6f9772c0b375fc1bd;p=u-boot.git rockchip: px30-ringneck: Update SPL_PAD_TO Kconfig option On px30-ringneck the FIT payload is located at sector 0x200 compared to the more Rockchip common sector 0x4000 offset: SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200 Because FIT payload is located at sector 0x200 and the TPL+SPL is located at sector 64, the combined size of TPL+SPL cannot take up more than 224KiB: (0x200 - 64) x 512 = 0x38000 (224 KiB) Adjust SPL_PAD_TO to match the used 0x200 sector offset. While at it, update the px30-ringneck-u-boot.dtsi to remove the now unnecessary override of simple-bin:fit:offset since SPL_PAD_TO matches with the current formula. Reviewed-by: Kever Yang Signed-off-by: Quentin Schulz --- diff --git a/arch/arm/dts/px30-ringneck-haikou-u-boot.dtsi b/arch/arm/dts/px30-ringneck-haikou-u-boot.dtsi index e04766ad09..29ea276363 100644 --- a/arch/arm/dts/px30-ringneck-haikou-u-boot.dtsi +++ b/arch/arm/dts/px30-ringneck-haikou-u-boot.dtsi @@ -15,14 +15,6 @@ }; }; -&binman { - simple-bin { - fit { - offset = <((CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR - 64) * 512)>; - }; - }; -}; - &emmc_clk { bootph-all; }; diff --git a/configs/ringneck-px30_defconfig b/configs/ringneck-px30_defconfig index dedf35d434..a22d25e008 100644 --- a/configs/ringneck-px30_defconfig +++ b/configs/ringneck-px30_defconfig @@ -25,7 +25,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/px30-ringneck-haikou.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y CONFIG_SPL_MAX_SIZE=0x20000 -CONFIG_SPL_PAD_TO=0x0 +CONFIG_SPL_PAD_TO=0x38000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set