From: Jonas Karlman Date: Sun, 7 Jan 2024 18:18:33 +0000 (+0000) Subject: rockchip: rk3328: Set efuse auto mode and timing control X-Git-Url: http://git.dujemihanovic.xyz/projects?a=commitdiff_plain;h=5708e8eeae53ad8ce605afdf61e5a83162dc5131;p=u-boot.git rockchip: rk3328: Set efuse auto mode and timing control Reading from efuse return zero when mainline TF-A is used. => dump_efuse 00000000: 00 00 00 00 .... 00000004: 00 00 00 00 .... 00000008: 00 00 00 00 .... 0000000c: 00 00 00 00 .... 00000010: 00 00 00 00 .... 00000014: 00 00 00 00 .... 00000018: 00 00 00 00 .... 0000001c: 00 00 00 00 .... However, when vendor TF-A blobs is used reading from efuse works. Change to use auto mode, enable finish and auto access err interrupts and set timing control using same values that vendor TF-A blob use to fix this. With this efuse can be read when either of mainline TF-A or vendor blob is used. => dump_efuse 00000000: 52 4b 33 82 RK3. 00000004: 00 fe 21 55 ..!U 00000008: 52 4b 57 34 RKW4 0000000c: 35 30 32 39 5029 00000010: 00 00 00 00 .... 00000014: 08 25 0c 0f .%.. 00000018: 02 0d 08 00 .... 0000001c: 00 00 f0 00 .... Signed-off-by: Jonas Karlman Reviewed-by: Kever Yang --- diff --git a/arch/arm/mach-rockchip/rk3328/rk3328.c b/arch/arm/mach-rockchip/rk3328/rk3328.c index de17b88682..ca623c0d3d 100644 --- a/arch/arm/mach-rockchip/rk3328/rk3328.c +++ b/arch/arm/mach-rockchip/rk3328/rk3328.c @@ -19,6 +19,23 @@ DECLARE_GLOBAL_DATA_PTR; #define GRF_BASE 0xFF100000 #define UART2_BASE 0xFF130000 #define FW_DDR_CON_REG 0xFF7C0040 +#define EFUSE_NS_BASE 0xFF260000 + +#define EFUSE_MOD 0x0000 +#define EFUSE_INT_CON 0x0014 +#define EFUSE_T_CSB_P 0x0028 +#define EFUSE_T_PGENB_P 0x002C +#define EFUSE_T_LOAD_P 0x0030 +#define EFUSE_T_ADDR_P 0x0034 +#define EFUSE_T_STROBE_P 0x0038 +#define EFUSE_T_CSB_R 0x003C +#define EFUSE_T_PGENB_R 0x0040 +#define EFUSE_T_LOAD_R 0x0044 +#define EFUSE_T_ADDR_R 0x0048 +#define EFUSE_T_STROBE_R 0x004C + +#define EFUSE_USER_MODE 0x1 +#define EFUSE_TIMING(s, l) (((s) << 16) | (l)) const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { [BROM_BOOTSOURCE_EMMC] = "/mmc@ff520000", @@ -50,10 +67,31 @@ struct mm_region *mem_map = rk3328_mem_map; int arch_cpu_init(void) { #ifdef CONFIG_SPL_BUILD + u32 reg; + /* We do some SoC one time setting here. */ /* Disable the ddr secure region setting to make it non-secure */ rk_setreg(FW_DDR_CON_REG, 0x200); + + /* Use efuse auto mode */ + reg = readl(EFUSE_NS_BASE + EFUSE_MOD); + writel(reg & ~EFUSE_USER_MODE, EFUSE_NS_BASE + EFUSE_MOD); + + /* Enable efuse finish and auto access err interrupt */ + writel(0x07, EFUSE_NS_BASE + EFUSE_INT_CON); + + /* Set efuse timing control */ + writel(EFUSE_TIMING(1, 241), EFUSE_NS_BASE + EFUSE_T_CSB_P); + writel(EFUSE_TIMING(1, 241), EFUSE_NS_BASE + EFUSE_T_PGENB_P); + writel(EFUSE_TIMING(1, 241), EFUSE_NS_BASE + EFUSE_T_LOAD_P); + writel(EFUSE_TIMING(1, 241), EFUSE_NS_BASE + EFUSE_T_ADDR_P); + writel(EFUSE_TIMING(2, 240), EFUSE_NS_BASE + EFUSE_T_STROBE_P); + writel(EFUSE_TIMING(1, 4), EFUSE_NS_BASE + EFUSE_T_CSB_R); + writel(EFUSE_TIMING(1, 4), EFUSE_NS_BASE + EFUSE_T_PGENB_R); + writel(EFUSE_TIMING(1, 4), EFUSE_NS_BASE + EFUSE_T_LOAD_R); + writel(EFUSE_TIMING(1, 4), EFUSE_NS_BASE + EFUSE_T_ADDR_R); + writel(EFUSE_TIMING(2, 3), EFUSE_NS_BASE + EFUSE_T_STROBE_R); #endif return 0; }