From: Stefan Roese <sr@denx.de>
Date: Tue, 14 Aug 2007 14:36:29 +0000 (+0200)
Subject: Merge with git://www.denx.de/git/u-boot.git
X-Git-Tag: v2025.01-rc5-pxa1908~22722^2~3^2
X-Git-Url: http://git.dujemihanovic.xyz/posts?a=commitdiff_plain;h=3b3bff4cbf2cb14f9a3e7d03f26ebab900efe4ae;p=u-boot.git
Merge with git://www.denx.de/git/u-boot.git
---
3b3bff4cbf2cb14f9a3e7d03f26ebab900efe4ae
diff --cc MAKEALL
index 8d1830f05c,7fb10b3648..1219fb373f
--- a/MAKEALL
+++ b/MAKEALL
@@@ -74,25 -150,73 +150,77 @@@ LIST_8xx="
## PPC4xx Systems
#########################################################################
- LIST_4xx=" \
- acadia acadia_nand ADCIOP alpr \
- AP1000 AR405 ASH405 bamboo \
- bamboo_nand bubinga CANBT CMS700 \
- CPCI2DP CPCI405 CPCI4052 CPCI405AB \
- CPCI405DT CPCI440 CPCIISER4 CRAYL1 \
- csb272 csb472 DASA_SIM DP405 \
- DU405 ebony ERIC EXBITGEN \
- G2000 HH405 hcu4 hcu5 \
- HUB405 JSE KAREF katmai \
- luan lwmon5 METROBOX MIP405 \
- MIP405T ML2 ml300 ocotea \
- OCRTC ORSG p3p440 PCI405 \
- pcs440ep PIP405 PLU405 PMC405 \
- PPChameleonEVB sbc405 sc3 sequoia \
- sequoia_nand taihu taishan VOH405 \
- VOM405 W7OLMC W7OLMG walnut \
- WUH405 XPEDITE1K yellowstone yosemite \
- yucca zeus \
+ LIST_4xx=" \
+ acadia \
+ acadia_nand \
+ ADCIOP \
+ alpr \
+ AP1000 \
+ AR405 \
+ ASH405 \
+ bamboo \
+ bamboo_nand \
+ bubinga \
+ CANBT \
+ CMS700 \
+ CPCI2DP \
+ CPCI405 \
+ CPCI4052 \
+ CPCI405AB \
+ CPCI405DT \
+ CPCI440 \
+ CPCIISER4 \
+ CRAYL1 \
+ csb272 \
+ csb472 \
+ DASA_SIM \
+ DP405 \
+ DU405 \
+ ebony \
+ ERIC \
+ EXBITGEN \
+ G2000 \
++ hcu4 \
++ hcu5 \
+ HH405 \
+ HUB405 \
+ JSE \
+ KAREF \
+ katmai \
+ luan \
+ lwmon5 \
+ METROBOX \
+ MIP405 \
+ MIP405T \
+ ML2 \
+ ml300 \
+ ocotea \
+ OCRTC \
+ ORSG \
+ p3p440 \
+ PCI405 \
+ pcs440ep \
+ PIP405 \
+ PLU405 \
+ PMC405 \
+ PPChameleonEVB \
+ sbc405 \
+ sc3 \
+ sequoia \
+ sequoia_nand \
++ taihu \
+ taishan \
+ VOH405 \
+ VOM405 \
+ W7OLMC \
+ W7OLMG \
+ walnut \
+ WUH405 \
+ XPEDITE1K \
+ yellowstone \
+ yosemite \
+ yucca \
++ zeus \
"
#########################################################################
diff --cc board/netstal/common/nm_bsp.c
index 1e06780c0e,0000000000..a9de45ea70
mode 100644,000000..100644
--- a/board/netstal/common/nm_bsp.c
+++ b/board/netstal/common/nm_bsp.c
@@@ -1,41 -1,0 +1,41 @@@
+/*
+ *(C) Copyright 2005-2007 Netstal Maschinen AG
+ * Niklaus Giger (Niklaus.Giger@netstal.com)
+ *
+ * This source code is free software; you can redistribute it
+ * and/or modify it in source code form under the terms of the GNU
+ * General Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+
+#include <common.h>
+#include <command.h>
+
- #if (CONFIG_COMMANDS & CFG_CMD_BSP)
++#ifdef CONFIG_CMD_BSP
+/*
+ * Command nm_bsp: Netstal Maschinen BSP specific command
+ */
+int nm_bsp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ printf("%s: flag %d, argc %d, argv[0] %s\n", __FUNCTION__,
+ flag, argc, argv[0]);
+ printf("Netstal Maschinen BSP specific command. None at the moment.\n");
+ return 0;
+}
+
+U_BOOT_CMD(
+ nm_bsp, 1, 1, nm_bsp,
+ "nm_bsp - Netstal Maschinen BSP specific command. \n",
+ "Help for Netstal Maschinen BSP specific command.\n"
+ );
+#endif
diff --cc board/netstal/hcu4/hcu4.c
index 252aaa76b2,0000000000..2b9560484d
mode 100644,000000..100644
--- a/board/netstal/hcu4/hcu4.c
+++ b/board/netstal/hcu4/hcu4.c
@@@ -1,403 -1,0 +1,400 @@@
+/*
+ *(C) Copyright 2005-2007 Netstal Maschinen AG
+ * Niklaus Giger (Niklaus.Giger@netstal.com)
+ *
+ * This source code is free software; you can redistribute it
+ * and/or modify it in source code form under the terms of the GNU
+ * General Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm-ppc/u-boot.h>
+#include "../common/nm_bsp.c"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define HCU_MACH_VERSIONS_REGISTER (0x7C000000 + 0xF00000)
+
- #define mtsdram(reg, data) { mtdcr(memcfga,reg);mtdcr(memcfgd,data); }
- #define mfsdram(value, reg) { mtdcr(memcfga,reg); value = mfdcr(memcfgd); }
-
+#define SDRAM_LEN 32*1024*1024 /* 32 MB -RAM */
+
+#define DO_UGLY_SDRAM_WORKAROUND
+
+enum {
+ /* HW_GENERATION_HCU wird nicht mehr unterstuetzt */
+ HW_GENERATION_HCU2 = 0x10,
+ HW_GENERATION_HCU3 = 0x10,
+ HW_GENERATION_HCU4 = 0x20,
+ HW_GENERATION_MCU = 0x08,
+ HW_GENERATION_MCU20 = 0x0a,
+ HW_GENERATION_MCU25 = 0x09,
+};
+
+void sysLedSet(u32 value);
+long int spd_sdram(int(read_spd)(uint addr));
+
+#ifdef CONFIG_SPD_EEPROM
+#define DEBUG
+#endif
+
+#if defined(DEBUG)
+void show_sdram_registers(void);
+#endif
+
+/*
+ * This function is run very early, out of flash, and before devices are
+ * initialized. It is called by lib_ppc/board.c:board_init_f by virtue
+ * of being in the init_sequence array.
+ *
+ * The SDRAM has been initialized already -- start.S:start called
+ * init.S:init_sdram early on -- but it is not yet being used for
+ * anything, not even stack. So be careful.
+ */
+
+#define CPC0_CR0 0xb1 /* Chip control register 0 */
+#define CPC0_CR1 0xb2 /* Chip control register 1 */
+/* Attention: If you want 1 microsecs times from the external oscillator
+ * use 0x00804051. But this causes problems with u-boot and linux!
+ */
+#define CPC0_CR1_VALUE 0x00004051
+#define CPC0_ECR 0xaa /* Edge condition register */
+#define EBC0_CFG 0x23 /* External Peripheral Control Register */
+#define CPC0_EIRR 0xb6 /* External Interrupt Register */
+
+
+int board_early_init_f (void)
+{
+ /*-------------------------------------------------------------------+
+ | Interrupt controller setup for the HCU4 board.
+ | Note: IRQ 0-15 405GP internally generated; high; level sensitive
+ | IRQ 16 405GP internally generated; low; level sensitive
+ | IRQ 17-24 RESERVED/UNUSED
+ | IRQ 31 (EXT IRQ 6) (unused)
+ +-------------------------------------------------------------------*/
+ mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (uicer, 0x00000000); /* disable all ints */
+ mtdcr (uiccr, 0x00000000); /* set all to be non-critical */
+ mtdcr (uicpr, 0xFFFFFF87); /* set int polarities */
+ mtdcr (uictr, 0x10000000); /* set int trigger levels */
+ mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+
+ mtdcr(CPC0_CR1, CPC0_CR1_VALUE);
+ mtdcr(CPC0_ECR, 0x60606000);
+ mtdcr(CPC0_EIRR, 0x7c000000);
+
+ return 0;
+}
+
+#ifdef CONFIG_BOARD_PRE_INIT
+int board_pre_init (void)
+{
+ return board_early_init_f ();
+}
+#endif
+
+int checkboard (void)
+{
+ unsigned int j;
+ u16 *boardVersReg = (u16 *) HCU_MACH_VERSIONS_REGISTER;
+ u16 generation = *boardVersReg & 0xf0;
+ u16 index = *boardVersReg & 0x0f;
+
+ /* Force /RTS to active. The board it not wired quite
+ correctly to use cts/rtc flow control, so just force the
+ /RST active and forget about it. */
+ writeb (readb (0xef600404) | 0x03, 0xef600404);
+ printf ("\nNetstal Maschinen AG ");
+ if (generation == HW_GENERATION_HCU3)
+ printf ("HCU3: index %d\n\n", index);
+ else if (generation == HW_GENERATION_HCU4)
+ printf ("HCU4: index %d\n\n", index);
+ /* GPIO here noch nicht richtig initialisert !!! */
+ sysLedSet(0);
+ for (j = 0; j < 7; j++) {
+ sysLedSet(1 << j);
+ udelay(50 * 1000);
+ }
+
+ return 0;
+}
+
+u32 sysLedGet(void)
+{
+ return (~((*(u32 *)GPIO0_OR)) >> 23) & 0xff;
+}
+
+void sysLedSet(u32 value /* value to place in LEDs */)
+{
+ u32 tmp = ~value;
+ u32 *ledReg;
+
+ tmp = (tmp << 23) | 0x7FFFFF;
+ ledReg = (u32 *)GPIO0_OR;
+ *ledReg = tmp;
+}
+
+/*
+ * sdram_init - Dummy implementation for start.S, spd_sdram or initdram
+ * used for HCUx
+ */
+void sdram_init(void)
+{
+ return;
+}
+
+#if defined(DEBUG)
+void show_sdram_registers(void)
+{
+ u32 value;
+
+ printf ("SDRAM Controller Registers --\n");
- mfsdram(value, mem_mcopt1);
++ mfsdram(mem_mcopt1, value);
+ printf (" SDRAM0_CFG : 0x%08x\n", value);
- mfsdram(value, mem_status);
++ mfsdram(mem_status, value);
+ printf (" SDRAM0_STATUS: 0x%08x\n", value);
- mfsdram(value, mem_mb0cf);
++ mfsdram(mem_mb0cf, value);
+ printf (" SDRAM0_B0CR : 0x%08x\n", value);
- mfsdram(value, mem_mb1cf);
++ mfsdram(mem_mb1cf, value);
+ printf (" SDRAM0_B1CR : 0x%08x\n", value);
- mfsdram(value, mem_sdtr1);
++ mfsdram(mem_sdtr1, value);
+ printf (" SDRAM0_TR : 0x%08x\n", value);
- mfsdram(value, mem_rtr);
++ mfsdram(mem_rtr, value);
+ printf (" SDRAM0_RTR : 0x%08x\n", value);
+}
+#endif
+
+/*
+ * this is even after checkboard. It returns the size of the SDRAM
+ * that we have installed. This function is called by board_init_f
+ * in lib_ppc/board.c to initialize the memory and return what I
+ * found. These are default value, which will be overridden later.
+ */
+
+long int fixed_hcu4_sdram (int board_type)
+{
+#ifdef DEBUG
+ printf (__FUNCTION__);
+#endif
+ /* disable memory controller */
+ mtdcr (memcfga, mem_mcopt1);
+ mtdcr (memcfgd, 0x00000000);
+
+ udelay (500);
+
+ /* Clear SDRAM0_BESR0 (Bus Error Syndrome Register) */
+ mtdcr (memcfga, mem_besra);
+ mtdcr (memcfgd, 0xffffffff);
+
+ /* Clear SDRAM0_BESR1 (Bus Error Syndrome Register) */
+ mtdcr (memcfga, mem_besrb);
+ mtdcr (memcfgd, 0xffffffff);
+
+ /* Clear SDRAM0_ECCCFG (disable ECC) */
+ mtdcr (memcfga, mem_ecccf);
+ mtdcr (memcfgd, 0x00000000);
+
+ /* Clear SDRAM0_ECCESR (ECC Error Syndrome Register) */
+ mtdcr (memcfga, mem_eccerr);
+ mtdcr (memcfgd, 0xffffffff);
+
+ /* Timing register: CASL=2, PTA=2, CTP=2, LDF=1, RFTA=5, RCD=2
+ * TODO ngngng
+ */
+ mtdcr (memcfga, mem_sdtr1);
+ mtdcr (memcfgd, 0x008a4015);
+
+ /* Memory Bank 0 Config == BA=0x00000000, SZ=64M, AM=3, BE=1
+ * TODO ngngng
+ */
+ mtdcr (memcfga, mem_mb0cf);
+ mtdcr (memcfgd, 0x00062001);
+
+ /* refresh timer = 0x400 */
+ mtdcr (memcfga, mem_rtr);
+ mtdcr (memcfgd, 0x04000000);
+
+ /* Power management idle timer set to the default. */
+ mtdcr (memcfga, mem_pmit);
+ mtdcr (memcfgd, 0x07c00000);
+
+ udelay (500);
+
+ /* Enable banks (DCE=1, BPRF=1, ECCDD=1, EMDUL=1) TODO */
+ mtdcr (memcfga, mem_mcopt1);
+ mtdcr (memcfgd, 0x90800000);
+
+#ifdef DEBUG
+ printf ("%s: done\n", __FUNCTION__);
+#endif
+ return SDRAM_LEN;
+}
+
+/*---------------------------------------------------------------------------+
+ * getSerialNr
+ *---------------------------------------------------------------------------*/
+static u32 getSerialNr(void)
+{
+ u32 *serial = (u32 *)CFG_FLASH_BASE;
+
+ if (*serial == 0xffffffff)
+ return get_ticks();
+
+ return *serial;
+}
+
+
+/*---------------------------------------------------------------------------+
+ * misc_init_r.
+ *---------------------------------------------------------------------------*/
+
+int misc_init_r(void)
+{
+ char *s = getenv("ethaddr");
+ char *e;
+ int i;
+ u32 serial = getSerialNr();
+
+ for (i = 0; i < 6; ++i) {
+ gd->bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0;
+ if (s)
+ s = (*e) ? e + 1 : e;
+ }
+
+ if (gd->bd->bi_enetaddr[3] == 0 &&
+ gd->bd->bi_enetaddr[4] == 0 &&
+ gd->bd->bi_enetaddr[5] == 0) {
+ char ethaddr[22];
+ /* [0..3] Must be in sync with CONFIG_ETHADDR */
+ gd->bd->bi_enetaddr[0] = 0x00;
+ gd->bd->bi_enetaddr[1] = 0x60;
+ gd->bd->bi_enetaddr[2] = 0x13;
+ gd->bd->bi_enetaddr[3] = (serial >> 16) & 0xff;
+ gd->bd->bi_enetaddr[4] = (serial >> 8) & 0xff;
+ gd->bd->bi_enetaddr[5] = (serial >> 0) & 0xff;
+ sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X\0",
+ gd->bd->bi_enetaddr[0], gd->bd->bi_enetaddr[1],
+ gd->bd->bi_enetaddr[2], gd->bd->bi_enetaddr[3],
+ gd->bd->bi_enetaddr[4], gd->bd->bi_enetaddr[5]) ;
+ printf("%s: Setting eth %s serial 0x%x\n", __FUNCTION__,
+ ethaddr, serial);
+ setenv ("ethaddr", ethaddr);
+ }
+ return 0;
+}
+
+#ifdef DO_UGLY_SDRAM_WORKAROUND
+#include "i2c.h"
+
+void set_spd_default_value(unsigned int spd_addr,uchar def_val)
+{
+ uchar value;
+ int res = i2c_read(SPD_EEPROM_ADDRESS, spd_addr, 1, &value, 1) ;
+
+ if (res == 0 && value == 0xff) {
+ res = i2c_write(SPD_EEPROM_ADDRESS,
+ spd_addr, 1, &def_val, 1) ;
+#ifdef DEBUG
+ printf("%s: Setting spd offset %3d to %3d res %d\n",
+ __FUNCTION__, spd_addr, def_val, res);
+#endif
+ }
+}
+#endif
+
+long int initdram(int board_type)
+{
+ long dram_size = 0;
+
+#if !defined(CONFIG_SPD_EEPROM)
+ dram_size = fixed_hcu4_sdram();
+#else
+#ifdef DO_UGLY_SDRAM_WORKAROUND
+ /* Workaround if you have no working I2C-EEPROM-SPD-configuration */
+ i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ set_spd_default_value(2, 4); /* SDRAM Type */
+ set_spd_default_value(7, 0); /* module width, high byte */
+ set_spd_default_value(12, 1); /* Refresh or 0x81 */
+
+ /* Only correct for HCU3 with 32 MB RAM*/
+ /* Number of bytes used by module manufacturer */
+ set_spd_default_value( 0, 128);
+ set_spd_default_value( 1, 11 ); /* Total SPD memory size */
+ set_spd_default_value( 2, 4 ); /* Memory type */
+ set_spd_default_value( 3, 12 ); /* Number of row address bits */
+ set_spd_default_value( 4, 9 ); /* Number of column address bits */
+ set_spd_default_value( 5, 1 ); /* Number of module rows */
+ set_spd_default_value( 6, 32 ); /* Module data width, LSB */
+ set_spd_default_value( 7, 0 ); /* Module data width, MSB */
+ set_spd_default_value( 8, 1 ); /* Module interface signal levels */
+ /* SDRAM cycle time for highest CL (Tclk) */
+ set_spd_default_value( 9, 112);
+ /* SDRAM access time from clock for highest CL (Tac) */
+ set_spd_default_value(10, 84 );
+ set_spd_default_value(11, 2 ); /* Module configuration type */
+ set_spd_default_value(12, 128); /* Refresh rate/type */
+ set_spd_default_value(13, 16 ); /* Primary SDRAM width */
+ set_spd_default_value(14, 8 ); /* Error Checking SDRAM width */
+ /* SDRAM device attributes, min clock delay for back to back */
+ /*random column addresses (Tccd) */
+ set_spd_default_value(15, 1 );
+ /* SDRAM device attributes, burst lengths supported */
+ set_spd_default_value(16, 143);
+ /* SDRAM device attributes, number of banks on SDRAM device */
+ set_spd_default_value(17, 4 );
+ /* SDRAM device attributes, CAS latency */
+ set_spd_default_value(18, 6 );
+ /* SDRAM device attributes, CS latency */
+ set_spd_default_value(19, 1 );
+ /* SDRAM device attributes, WE latency */
+ set_spd_default_value(20, 1 );
+ set_spd_default_value(21, 0 ); /* SDRAM module attributes */
+ /* SDRAM device attributes, general */
+ set_spd_default_value(22, 14 );
+ /* SDRAM cycle time for 2nd highest CL (Tclk) */
+ set_spd_default_value(23, 117);
+ /* SDRAM access time from clock for2nd highest CL (Tac) */
+ set_spd_default_value(24, 84 );
+ /* SDRAM cycle time for 3rd highest CL (Tclk) */
+ set_spd_default_value(25, 0 );
+ /* SDRAM access time from clock for3rd highest CL (Tac) */
+ set_spd_default_value(26, 0 );
+ set_spd_default_value(27, 15 ); /* Minimum row precharge time (Trp) */
+ /* Minimum row active to row active delay (Trrd) */
+ set_spd_default_value(28, 14 );
+ set_spd_default_value(29, 15 ); /* Minimum CAS to RAS delay (Trcd) */
+ set_spd_default_value(30, 37 ); /* Minimum RAS pulse width (Tras) */
+ set_spd_default_value(31, 8 ); /* Module bank density */
+ /* Command and Address signal input setup time */
+ set_spd_default_value(32, 21 );
+ /* Command and Address signal input hold time */
+ set_spd_default_value(33, 8 );
+ set_spd_default_value(34, 21 ); /* Data signal input setup time */
+ set_spd_default_value(35, 8 ); /* Data signal input hold time */
+#endif /* DO_UGLY_SDRAM_WORKAROUND */
+ dram_size = spd_sdram(0);
+#endif
+
+#ifdef DEBUG
+ show_sdram_registers();
+#endif
+
+#if defined(CFG_DRAM_TEST)
+ bcu4_testdram(dram_size);
+ printf("%s %d MB of SDRAM\n", __FUNCTION__, dram_size/(1024*1024));
+#endif
+
+ return dram_size;
+}
diff --cc cpu/ppc4xx/traps.c
index de5fde9e29,899cdbd1f4..f5365cb76a
mode 100755,100644..100644
--- a/cpu/ppc4xx/traps.c
+++ b/cpu/ppc4xx/traps.c
diff --cc cpu/ppc4xx/usb.c
index 0000000000,2837b37c58..272ed8c15e
mode 000000,100644..100644
--- a/cpu/ppc4xx/usb.c
+++ b/cpu/ppc4xx/usb.c
@@@ -1,0 -1,50 +1,50 @@@
+ /*
+ * (C) Copyright 2007
+ * Markus Klotzbuecher, DENX Software Engineering <mk@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+ #include <common.h>
+
+ #if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+
+ #include "usbdev.h"
+
-int usb_cpu_init()
++int usb_cpu_init(void)
+ {
+
+ #if defined(CONFIG_440EP) || defined(CONFIG_440EPX)
+ usb_dev_init();
+ #endif
+
+ return 0;
+ }
+
-int usb_cpu_stop()
++int usb_cpu_stop(void)
+ {
+ return 0;
+ }
+
-int usb_cpu_init_fail()
++int usb_cpu_init_fail(void)
+ {
+ return 0;
+ }
+
+ #endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */
diff --cc include/configs/hcu4.h
index 9e45e903d2,0000000000..577f459e29
mode 100644,000000..100644
--- a/include/configs/hcu4.h
+++ b/include/configs/hcu4.h
@@@ -1,341 -1,0 +1,348 @@@
+/*
+ *(C) Copyright 2005-2007 Netstal Maschinen AG
+ * Niklaus Giger (Niklaus.Giger@netstal.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * hcu4.h - configuration for HCU4 board (similar to hcu5.h)
+ ***********************************************************************/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_HCU4 1 /* Board is HCU4 */
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_405GPr 1 /* HCU4 has a 405GPr */
+#define CONFIG_405GP 1
+#define CONFIG_4xx 1
+
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+*----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */
+#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */
+
+
+#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
+#define CFG_FLASH_BASE 0xfff80000 /* start of FLASH */
+#define CFG_MONITOR_BASE TEXT_BASE
+
+/* ... with on-chip memory here (4KBytes) */
+#define CFG_OCM_DATA_ADDR 0xF4000000
+#define CFG_OCM_DATA_SIZE 0x00001000
+/* Do not set up locked dcache as init ram. */
+#undef CFG_INIT_DCACHE_CS
+
+/* Use the On-Chip-Memory (OCM) as a temporary stack for the startup code. */
+#define CFG_TEMP_STACK_OCM 1
+
+#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* OCM */
+#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE
+#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+/*
+ * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1.
+ * If CFG_405_UART_ERRATA_59, then UART divisor is 31.
+ * Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value.
+ * The Linux BASE_BAUD define should match this configuration.
+ * baseBaud = cpuClock/(uartDivisor*16)
+ * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
+ * set Linux BASE_BAUD to 403200.
+ */
+#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
+#undef CONFIG_SERIAL_MULTI /* needed to be able to define
+ CONFIG_SERIAL_SOFTWARE_FIFO */
+#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
+#define CFG_BASE_BAUD 691200
+
+/* Size (bytes) of interrupt driven serial port buffer.
+ * Set to 0 to use polling instead of interrupts.
+ * Setting to 0 will also disable RTS/CTS handshaking.
+ */
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+
+/* Set console baudrate to 9600 */
+#define CONFIG_BAUDRATE 9600
+
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+
+#undef CFG_ENV_IS_IN_NVRAM
+#undef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_IS_IN_EEPROM
+#undef CFG_ENV_IS_NOWHERE
+
+#ifdef CFG_ENV_IS_IN_EEPROM
+/* Put the environment after the SDRAM configuration */
+#define PROM_SIZE 2048
+#define CFG_ENV_OFFSET 512
+#define CFG_ENV_SIZE (PROM_SIZE-CFG_ENV_OFFSET)
+#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+/* Put the environment in Flash */
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#endif
+
+/*-----------------------------------------------------------------------
+ * I2C stuff for a ATMEL AT24C16 (2kB holding ENV, we are using the
+ * the first internal I2C controller of the PPC440EPx
+ *----------------------------------------------------------------------*/
+#define CFG_SPD_BUS_NUM 0
+
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+/* This is the 7bit address of the device, not including P. */
+#define CFG_I2C_EEPROM_ADDR 0x50
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+
+/* The EEPROM can do 16byte ( 1 << 4 ) page writes. */
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
+#define CFG_EEPROM_PAGE_WRITE_BITS 4
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#undef CFG_I2C_MULTI_EEPROMS
+
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+/* Setup some board specific values for the default environment variables */
+#define CONFIG_HOSTNAME hcu4
+#define CONFIG_IPADDR 172.25.1.42
+#define CONFIG_ETHADDR 00:60:13:00:00:00 /* Netstal Machines AG MAC */
+#define CONFIG_OVERWRITE_ETHADDR_ONCE
+#define CONFIG_SERVERIP 172.25.1.3
+
+#define CFG_TFTP_LOADADDR 0x01000000 /* @16 MB */
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "loadaddr=0x01000000\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+ "nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
+ "bootm\0" \
+ "rootpath=/home/diagnose/eldk/ppc_4xx\0" \
+ "bootfile=/tftpboot/hcu4/uImage\0" \
+ "load=tftp 100000 hcu4/u-boot.bin\0" \
+ "update=protect off FFFa0000 FFFFFFFF;era FFFa0000 FFFFFFFF;" \
+ "cp.b 100000 FFFa0000 60000\0" \
+ "upd=run load;run update\0" \
+ "vx=tftp ${loadaddr} hcu4_vx_rom;" \
+ "setenv bootargs emac(0,0)hcu4_vx_rom e=${ipaddr} " \
+ " h=${serverip} u=dpu pw=netstal8752 tn=hcu4 f=0x3008;" \
+ "bootvx ${loadaddr}\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run vx"
+
+#if 0
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#endif
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 1 /* PHY address */
+
+#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
+
+#define CONFIG_HAS_ETH0
+#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_BSP | \
- CFG_CMD_CACHE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_FLASH | \
- CFG_CMD_I2C | \
- CFG_CMD_IMMAP | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM \
- )
-
- /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
- #include <cmd_confdefs.h>
++
++/*
++ * BOOTP options
++ */
++#define CONFIG_BOOTP_BOOTFILESIZE
++#define CONFIG_BOOTP_BOOTPATH
++#define CONFIG_BOOTP_GATEWAY
++#define CONFIG_BOOTP_HOSTNAME
++
++/*
++ * Command line configuration.
++ */
++#include <config_cmd_default.h>
++
++#define CONFIG_CMD_ASKENV
++#define CONFIG_CMD_BSP
++#define CONFIG_CMD_CACHE
++#define CONFIG_CMD_DHCP
++#define CONFIG_CMD_DIAG
++#define CONFIG_CMD_EEPROM
++#define CONFIG_CMD_ELF
++#define CONFIG_CMD_FLASH
++#define CONFIG_CMD_I2C
++#define CONFIG_CMD_IMMAP
++#define CONFIG_CMD_IRQ
++#define CONFIG_CMD_MII
++#define CONFIG_CMD_NET
++#define CONFIG_CMD_PING
++#define CONFIG_CMD_REGINFO
++#define CONFIG_CMD_SDRAM
+
+/* SPD EEPROM (sdram speed config) disabled */
+#define CONFIG_SPD_EEPROM 1
+#define SPD_EEPROM_ADDRESS 0x50
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
- #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++#if defined(CONFIG_CMD_KGDB)
+ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ */
+
+/* Memory Bank 0 (Flash Bank 0) initialization */
+#define CFG_EBC_PB0AP 0x02005400
+#define CFG_EBC_PB0CR 0xFFF18000 /* BAS=0xFFF,BS=1MB,BU=R/W,BW=8bit */
+
+#define CFG_EBC_PB1AP 0x03041200
+#define CFG_EBC_PB1CR 0x7009A000 /* BAS=,BS=MB,BU=R/W,BW=bit */
+
+#define CFG_EBC_PB2AP 0x02054500
+#define CFG_EBC_PB2CR 0x78018000 /* BAS=,BS=MB,BU=R/W,BW=bit */
+
+#define CFG_EBC_PB3AP 0x01840300
+#define CFG_EBC_PB3CR 0x7c0ba000 /* BAS=,BS=MB,BU=R/W,BW=bit */
+
+#define CFG_EBC_PB4AP 0x01800300
+#define CFG_EBC_PB4CR 0x7e0ba000 /* BAS=,BS=MB,BU=R/W,BW=bit */
+
+#define CFG_GPIO0_TCR 0x7ffe0000 /* GPIO value */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
+
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+/* Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */
+#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */
+
+
+/* Configuration Port location */
+#define CONFIG_PORT_ADDR 0xF0000500
+
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ *----------------------------------------------------------------------*/
+#define CFG_DCACHE_SIZE 16384 /* For IBM 405GPr CPUs */
+#define CFG_CACHELINE_SIZE 32 /* ... */
- #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
- #endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define CFG_HUSH_PARSER /* use "hush" command parser */
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
- #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
diff --cc include/configs/hcu5.h
index fa6ca37534,0000000000..d0bf2516ed
mode 100644,000000..100644
--- a/include/configs/hcu5.h
+++ b/include/configs/hcu5.h
@@@ -1,388 -1,0 +1,393 @@@
+/*
+ * (C) Copyright 2007 Netstal Maschinen AG
+ * Niklaus Giger (Niklaus.Giger@netstal.com)
+ *
+ * (C) Copyright 2006-2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2006
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * hcu5.h - configuration for HCU5 board (derived from sequoia.h)
+ ***********************************************************************/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_HCU5 1 /* Board is HCU5 */
+#define CONFIG_440EPX 1 /* Specific PPC440EPx */
+#define CONFIG_440 1 /* ... PPC440 family */
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
+#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */
+#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */
+
+#define CFG_BOOT_BASE_ADDR 0xfff00000
+#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
+#define CFG_FLASH_BASE 0xfff80000 /* start of FLASH */
+#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_OCM_BASE 0xe0010000 /* ocm */
+#define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */
+#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
+#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
+#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000
+#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000
+
+/* Don't change either of these */
+#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */
+
+#define CFG_USB2D0_BASE 0xe0000100
+#define CFG_USB_DEVICE 0xe0000000
+#define CFG_USB_HOST 0xe0000400
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer
+ *----------------------------------------------------------------------*/
+/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */
+#define CFG_INIT_RAM_OCM 1 /* OCM as init ram */
+#define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */
+
+#define CFG_INIT_RAM_END (4 << 10)
+#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
+#define CONFIG_BAUDRATE 9600
+#undef CONFIG_SERIAL_MULTI /* needed to be able to define
+ CONFIG_SERIAL_SOFTWARE_FIFO, but
+ CONFIG_SERIAL_SOFTWARE_FIFO (16) does not work */
+/* Size (bytes) of interrupt driven serial port buffer.
+ * Set to 0 to use polling instead of interrupts.
+ * Setting to 0 will also disable RTS/CTS handshaking.
+ */
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#undef CONFIG_UART1_CONSOLE
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+
+#undef CFG_ENV_IS_IN_NVRAM
+#undef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_IS_IN_EEPROM
+#undef CFG_ENV_IS_NOWHERE
+
+#ifdef CFG_ENV_IS_IN_EEPROM
+/* Put the environment after the SDRAM and bootstrap configuration */
+#define PROM_SIZE 2048
+#define CFG_BOOSTRAP_OPTION_OFFSET 512
+#define CFG_ENV_OFFSET (CFG_BOOSTRAP_OPTION_OFFSET + 0x10)
+#define CFG_ENV_SIZE (PROM_SIZE-CFG_ENV_OFFSET)
+#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+/* Put the environment in Flash */
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#endif
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#define CFG_MBYTES_SDRAM (128) /* 128 MB or 256 MB */
+#define CFG_DDR_CACHED_ADDR 0x40000000 /* setup 2nd TLB cached here */
+#undef CONFIG_DDR_DATA_EYE /* Do not use DDR2 optimization */
+#define CONFIG_DDR_ECC 1 /* enable ECC */
+
+/*-----------------------------------------------------------------------
+ * I2C stuff for a ATMEL AT24C16 (2kB holding ENV, we are using the
+ * the second internal I2C controller of the PPC440EPx
+ *----------------------------------------------------------------------*/
+#define CFG_SPD_BUS_NUM 1
+
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+/* This is the 7bit address of the device, not including P. */
+#define CFG_I2C_EEPROM_ADDR 0x50
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+
+/* The EEPROM can do 16byte ( 1 << 4 ) page writes. */
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
+#define CFG_EEPROM_PAGE_WRITE_BITS 4
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#undef CFG_I2C_MULTI_EEPROMS
+
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run nfs\" to mount Linux root filesystem over NFS;"\
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+/* Setup some board specific values for the default environment variables */
+#define CONFIG_HOSTNAME hcu5
+#define CONFIG_IPADDR 172.25.1.42
+#define CONFIG_ETHADDR 00:60:13:00:00:00 /* Netstal Machines AG MAC */
+#define CONFIG_OVERWRITE_ETHADDR_ONCE
+#define CONFIG_SERVERIP 172.25.1.3
+
+#define CFG_TFTP_LOADADDR 0x01000000 /* @16 MB */
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "loadaddr=0x01000000\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+ "nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
+ "bootm\0" \
+ "bootfile=hcu5/uImage\0" \
+ "rootpath=/home/hcu/eldk/ppc_4xxFP\0" \
+ "load=tftp 100000 hcu5/u-boot.bin\0" \
+ "update=protect off FFFa0000 FFFFFFFF;era FFFa0000 FFFFFFFF;" \
+ "cp.b 100000 FFFa0000 60000\0" \
+ "upd=run load;run update\0" \
+ "vx=tftp ${loadaddr} hcu5/hcu5_vx_rom;" \
+ "setenv bootargs emac(0,0)hcu5_vx_rom e=${ipaddr} " \
+ " h=${serverip} u=dpu pw=netstal8752 tn=hcu5 f=0x3008;" \
+ "bootvx ${loadaddr}\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run vx"
+
+#if 0
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#endif
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_M88E1111_PHY 1
+#define CONFIG_IBM_EMAC4_V4 1
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */
+
+#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
+
+#define CONFIG_HAS_ETH0
+#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_NET_MULTI 1
+#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
+#define CONFIG_PHY1_ADDR 1
+
+/* USB */
+#define CONFIG_USB_OHCI
+#define CONFIG_USB_STORAGE
+
+/* Comment this out to enable USB 1.1 device */
+#define USB_2_0_DEVICE
+
- #define CMD_USB CFG_CMD_USB
-
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_BSP | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_FAT | \
- CFG_CMD_I2C | \
- CFG_CMD_IMMAP | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM | \
- CMD_USB)
++/*
++ * BOOTP options
++ */
++#define CONFIG_BOOTP_BOOTFILESIZE
++#define CONFIG_BOOTP_BOOTPATH
++#define CONFIG_BOOTP_GATEWAY
++#define CONFIG_BOOTP_HOSTNAME
+
- #define CONFIG_SUPPORT_VFAT
++/*
++ * Command line configuration.
++ */
++#include <config_cmd_default.h>
++
++#define CONFIG_CMD_ASKENV
++#define CONFIG_CMD_BSP
++#define CONFIG_CMD_DHCP
++#define CONFIG_CMD_DIAG
++#define CONFIG_CMD_EEPROM
++#define CONFIG_CMD_ELF
++#define CONFIG_CMD_FLASH
++#define CONFIG_CMD_FAT
++#define CONFIG_CMD_I2C
++#define CONFIG_CMD_IMMAP
++#define CONFIG_CMD_IRQ
++#define CONFIG_CMD_MII
++#define CONFIG_CMD_NET
++#define CONFIG_CMD_NFS
++#define CONFIG_CMD_PING
++#define CONFIG_CMD_REGINFO
++#define CONFIG_CMD_SDRAM
++#define CONFIG_CMD_USB
+
- /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
- #include <cmd_confdefs.h>
++#define CONFIG_SUPPORT_VFAT
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
- #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *----------------------------------------------------------------------*/
+/* General PCI */
+#define CONFIG_PCI /* include pci support */
+#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
+
+/* Board-specific PCI */
+#define CFG_PCI_TARGET_INIT
+#define CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
+#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH CFG_FLASH_BASE
+#define CFG_CS_1 0xC8000000 /* CAN */
+#define CFG_CS_2 0xCC000000 /* CPLD and IMC-Bus Standard */
+#define CFG_CPLD CFG_CS_2
+#define CFG_CS_3 0xCD000000 /* CPLD and IMC-Bus Fast */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ * Memory Bank 0 (BOOT-FLASH) initialization
+ */
+#define CFG_BOOTFLASH_CS 0 /* Boot Flash chip connected to CSx */
+#define CFG_EBC_PB0AP 0x02005400
+#define CFG_EBC_PB0CR 0xFFF18000 /* (CFG_FLASH | 0xda000) */
+#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 32 /* max number of sectors on one chip */
+
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+/* Memory Bank 1 CAN-Chips initialization */
+#define CFG_EBC_PB1AP 0x02054500
+#define CFG_EBC_PB1CR 0xC8018000
+
+/* Memory Bank 2 CPLD/IMC-Bus standard initialization */
+#define CFG_EBC_PB2AP 0x01840300
+#define CFG_EBC_PB2CR 0xCC0BA000
+
+/* Memory Bank 3 IMC-Bus fast mode initialization */
+#define CFG_EBC_PB3AP 0x01800300
+#define CFG_EBC_PB3CR 0xCE0BA000
+
+/* Memory Bank 4 (not used) initialization */
+#undef CFG_EBC_PB4AP
+#undef CFG_EBC_PB4CR
+
+/* Memory Bank 5 (not used) initialization */
+#undef CFG_EBC_PB5AP
+#undef CFG_EBC_PB5CR
+
+#define HCU_CPLD_VERSION_REGISTER ( CFG_CPLD + 0x0F00000 )
+#define HCU_HW_VERSION_REGISTER ( CFG_CPLD + 0x1400000 )
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ *----------------------------------------------------------------------*/
+#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
+#define CFG_CACHELINE_SIZE 32 /* ... */
- #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
- #endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define CFG_HUSH_PARSER /* use "hush" command parser */
+#ifdef CFG_HUSH_PARSER
+ #define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
- #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
diff --cc include/configs/luan.h
index e192d06923,72aae09d03..26dbec92e9
--- a/include/configs/luan.h
+++ b/include/configs/luan.h
@@@ -212,25 -213,36 +212,32 @@@
#define CONFIG_HW_WATCHDOG /* watchdog */
#endif
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | \
- CFG_CMD_ELF | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM | \
- 0)
--
- /* this must be included AFTER the definition of CONFIG_COMMANDS */
- #include <cmd_confdefs.h>
+ /*
+ * BOOTP options
+ */
+ #define CONFIG_BOOTP_BOOTFILESIZE
+ #define CONFIG_BOOTP_BOOTPATH
+ #define CONFIG_BOOTP_GATEWAY
+ #define CONFIG_BOOTP_HOSTNAME
+
-
+ /*
+ * Command line configuration.
+ */
+ #include <config_cmd_default.h>
+
+ #define CONFIG_CMD_ASKENV
+ #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ELF
+ #define CONFIG_CMD_EEPROM
+ #define CONFIG_CMD_I2C
+ #define CONFIG_CMD_IRQ
+ #define CONFIG_CMD_MII
+ #define CONFIG_CMD_NET
+ #define CONFIG_CMD_NFS
+ #define CONFIG_CMD_PCI
+ #define CONFIG_CMD_PING
+ #define CONFIG_CMD_REGINFO
+ #define CONFIG_CMD_SDRAM
-
/*
* Miscellaneous configurable options
*/
diff --cc include/configs/lwmon5.h
index 52db71e89d,ef9ab22b60..604b7d12f8
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@@ -252,31 -223,43 +249,41 @@@
#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_FAT | \
- CFG_CMD_LOG | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM | \
- CMD_USB)
-
+ /*
+ * BOOTP options
+ */
+ #define CONFIG_BOOTP_BOOTFILESIZE
+ #define CONFIG_BOOTP_BOOTPATH
+ #define CONFIG_BOOTP_GATEWAY
+ #define CONFIG_BOOTP_HOSTNAME
- #define CONFIG_SUPPORT_VFAT
-
+ /*
+ * Command line configuration.
+ */
+ #include <config_cmd_default.h>
+
+ #define CONFIG_CMD_ASKENV
+ #define CONFIG_CMD_DATE
+ #define CONFIG_CMD_DHCP
+ #define CONFIG_CMD_DIAG
+ #define CONFIG_CMD_EEPROM
+ #define CONFIG_CMD_ELF
+ #define CONFIG_CMD_FAT
+ #define CONFIG_CMD_I2C
+ #define CONFIG_CMD_IRQ
++#define CONFIG_CMD_LOG
+ #define CONFIG_CMD_MII
+ #define CONFIG_CMD_NET
+ #define CONFIG_CMD_NFS
+ #define CONFIG_CMD_PCI
+ #define CONFIG_CMD_PING
+ #define CONFIG_CMD_REGINFO
+ #define CONFIG_CMD_SDRAM
- /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
- #include <cmd_confdefs.h>
+ #ifdef CONFIG_440EPX
+ #define CONFIG_CMD_USB
+ #endif
-
/*-----------------------------------------------------------------------
* Miscellaneous configurable options
*----------------------------------------------------------------------*/
diff --cc include/configs/taihu.h
index 61814a8096,0000000000..d623e56009
mode 100644,000000..100644
--- a/include/configs/taihu.h
+++ b/include/configs/taihu.h
@@@ -1,473 -1,0 +1,476 @@@
+/*
+ * (C) Copyright 2000-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2005-2007
+ * Beijing UD Technology Co., Ltd., taihusupport@amcc.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+
+#define CONFIG_405EP 1 /* this is a PPC405 CPU */
+#define CONFIG_4xx 1 /* member of PPC4xx family */
+#define CONFIG_TAIHU 1 /* on a taihu board */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f */
+
+#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
+
+#define CONFIG_NO_SERIAL_EEPROM
+
+/*----------------------------------------------------------------------------*/
+#ifdef CONFIG_NO_SERIAL_EEPROM
+
+/*
+!-------------------------------------------------------------------------------
+! PLL settings for 333MHz CPU, 111MHz PLB/SDRAM, 55MHz EBC, 33MHz PCI,
+! assuming a 33MHz input clock to the 405EP from the C9531.
+!-------------------------------------------------------------------------------
+*/
+#define PLLMR0_333_111_55_37 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
+ PLL_MALDIV_1 | PLL_PCIDIV_3)
+#define PLLMR1_333_111_55_37 (PLL_FBKDIV_10 | \
+ PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
+ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI)
+#define PLLMR0_333_111_55_111 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
+ PLL_MALDIV_1 | PLL_PCIDIV_1)
+#define PLLMR1_333_111_55_111 (PLL_FBKDIV_10 | \
+ PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
+ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI)
+
+#define PLLMR0_DEFAULT PLLMR0_333_111_55_37
+#define PLLMR1_DEFAULT PLLMR1_333_111_55_37
+#define PLLMR0_DEFAULT_PCI66 PLLMR0_333_111_55_111
+#define PLLMR1_DEFAULT_PCI66 PLLMR1_333_111_55_111
+
+#endif
+/*----------------------------------------------------------------------------*/
+
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+
+#define CONFIG_ENV_OVERWRITE 1
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootfile=/tftpboot/taihu/uImage\0" \
+ "rootpath=/opt/eldk/ppc_4xx\0" \
+ "netdev=eth0\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+ "flash_nfs=run nfsargs addip addtty;" \
+ "bootm ${kernel_addr}\0" \
+ "flash_self=run ramargs addip addtty;" \
+ "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
+ "bootm\0" \
+ "kernel_addr=FC000000\0" \
+ "ramdisk_addr=FC180000\0" \
+ "load=tftp 200000 /tftpboot/taihu/u-boot.bin\0" \
+ "update=protect off FFFC0000 FFFFFFFF;era FFFC0000 FFFFFFFF;" \
+ "cp.b 200000 FFFC0000 40000\0" \
+ "upd=run load;run update\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#if 0
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#endif
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 0x14 /* PHY address */
+#define CONFIG_HAS_ETH1
+#define CONFIG_PHY1_ADDR 0x10 /* EMAC1 PHY address */
+#define CONFIG_NET_MULTI 1
+#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */
+#define CONFIG_PHY_RESET 1
+
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_CACHE | \
- CFG_CMD_DHCP | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_SPI | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM )
-
- /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
- #include <cmd_confdefs.h>
++/*
++ * BOOTP options
++ */
++#define CONFIG_BOOTP_BOOTFILESIZE
++#define CONFIG_BOOTP_BOOTPATH
++#define CONFIG_BOOTP_GATEWAY
++#define CONFIG_BOOTP_HOSTNAME
++
++/*
++ * Command line configuration.
++ */
++#include <config_cmd_default.h>
++
++#define CONFIG_CMD_ASKENV
++#define CONFIG_CMD_CACHE
++#define CONFIG_CMD_DHCP
++#define CONFIG_CMD_EEPROM
++#define CONFIG_CMD_ELF
++#define CONFIG_CMD_I2C
++#define CONFIG_CMD_IRQ
++#define CONFIG_CMD_MII
++#define CONFIG_CMD_NET
++#define CONFIG_CMD_PCI
++#define CONFIG_CMD_PING
++#define CONFIG_CMD_REGINFO
++#define CONFIG_CMD_SDRAM
++#define CONFIG_CMD_SPI
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+#undef CONFIG_SPD_EEPROM /* use SPD EEPROM for setup */
+#define CFG_SDRAM_SIZE_PER_BANK 0x04000000 /* 64MB */
+#define CFG_SDRAM_BANKS 2
+
+/*
+ * SDRAM configuration (please see cpu/ppc/sdram.[ch])
+ */
+#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
+#define CONFIG_SDRAM_BANK1 1 /* init onboard SDRAM bank 1 */
+
+/* SDRAM timings used in datasheet */
+#define CFG_SDRAM_CL 3 /* CAS latency */
+#define CFG_SDRAM_tRP 20 /* PRECHARGE command period */
+#define CFG_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE command period */
+#define CFG_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */
+#define CFG_SDRAM_tRFC 66 /* Auto refresh period */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
- #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* print buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+/*
+ * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1.
+ * If CFG_405_UART_ERRATA_59, then UART divisor is 31.
+ * Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value.
+ * The Linux BASE_BAUD define should match this configuration.
+ * baseBaud = cpuClock/(uartDivisor*16)
+ * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
+ * set Linux BASE_BAUD to 403200.
+ */
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
+#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
+#define CFG_BASE_BAUD 691200
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_UART1_CONSOLE 1
+
-
+/* The following table includes the supported baudrates */
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+/*-----------------------------------------------------------------------
+ * I2C stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+#define CFG_I2C_NOPROBES { 0x69 } /* avoid iprobe hangup (why?) */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 6 /* 24C02 requires 5ms delay */
+
- #if (CONFIG_COMMANDS & CFG_CMD_EEPROM)
+#define CFG_I2C_EEPROM_ADDR 0x50 /* I2C boot EEPROM (24C02W) */
+#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
- #endif
-
+
+#define CONFIG_SOFT_SPI
+#define SPI_SCL spi_scl
+#define SPI_SDA spi_sda
+#define SPI_READ spi_read()
+#define SPI_DELAY udelay(2)
+#ifndef __ASSEMBLY__
+void spi_scl(int);
+void spi_sda(int);
+unsigned char spi_read(void);
+#endif
+
+/* standard dtt sensor configuration */
+#define CONFIG_DTT_DS1775 1
+#define CONFIG_DTT_SENSORS { 0 }
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
+#define PCI_HOST_FORCE 1 /* configure as pci host */
+#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
+
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+ /* resource configuration */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
+#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
+#define CFG_PCI_CLASSCODE 0x0600 /* PCI Class Code: bridge/host */
+#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
+#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
+#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
+#define CFG_PCI_PTM2LA 0x00000000 /* disabled */
+#define CFG_PCI_PTM2MS 0x00000000 /* disabled */
+#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
+#define CONFIG_EEPRO100 1
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xFFE00000
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
+#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN)
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_ADDR0 0x555
+#define CFG_FLASH_ADDR1 0x2aa
+#define CFG_FLASH_WORD_SIZE unsigned short
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
+/*-----------------------------------------------------------------------
+ * NVRAM organization
+ */
+#define CFG_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */
+#define CFG_NVRAM_SIZE 0x1ff8 /* NVRAM size */
+
+#ifdef CFG_ENV_IS_IN_NVRAM
+#define CFG_ENV_SIZE 0x0ff8 /* Size of Environment vars */
+#define CFG_ENV_ADDR \
+ (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE) /* Env*/
+#endif
+
+/*-----------------------------------------------------------------------
+ * PPC405 GPIO Configuration
+ */
+#define CFG_440_GPIO_TABLE { /* GPIO Alternate1 */ \
+{ \
+/* GPIO Core 0 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO0 PerBLast SPI CS */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO1 TS1E */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO2 TS2E */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO3 TS1O */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO4 TS2O */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO5 TS3 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO6 TS4 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO7 TS5 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO8 TS6 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO9 TrcClk */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10 PerCS1 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO11 PerCS2 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO12 PerCS3 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO13 PerCS4 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO14 PerAddr03 SPI SCLK */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO15 PerAddr04 SPI DI */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO16 PerAddr05 SPI DO */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17 IRQ0 PCI INTA */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18 IRQ1 PCI INTB */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19 IRQ2 PCI INTC */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO20 IRQ3 PCI INTD */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO21 IRQ4 USB */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO22 IRQ5 EBC */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO23 IRQ6 unused */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24 UART0_DCD UART1 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25 UART0_DSR */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26 UART0_RI */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO27 UART0_DTR */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28 UART1_Rx UART0 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29 UART1_Tx */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO30 RejectPkt0 User LED1 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO31 RejectPkt1 User LED2 */ \
+} \
+}
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 16384 /* For IBM 405EP CPU */
+#define CFG_CACHELINE_SIZE 32
- #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
- #endif
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */
+#define FLASH_BASE1_PRELIM 0xFC000000 /* FLASH bank #1 */
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in data cache)
+ */
+/* use on chip memory (OCM) for temperary stack until sdram is tested */
+#define CFG_TEMP_STACK_OCM 1
+
+/* On Chip Memory location */
+#define CFG_OCM_DATA_ADDR 0xF8000000
+#define CFG_OCM_DATA_SIZE 0x1000
+#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of SDRAM */
+#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ */
+
+/* Memory Bank 0 (Flash/SRAM) initialization */
+#define CFG_EBC_PB0AP 0x03815600
+#define CFG_EBC_PB0CR 0xFFE3A000 /* BAS=0xFFE,BS=2MB,BU=R/W,BW=16bit */
+
+/* Memory Bank 1 (NVRAM/RTC) initialization */
+#define CFG_EBC_PB1AP 0x05815600
+#define CFG_EBC_PB1CR 0xFC0BA000 /* BAS=0xFc0,BS=32MB,BU=R/W,BW=16bit */
+
+/* Memory Bank 2 (USB device) initialization */
+#define CFG_EBC_PB2AP 0x03016600
+#define CFG_EBC_PB2CR 0x50018000 /* BAS=0x500,BS=1MB,BU=R/W,BW=8bit */
+
+/* Memory Bank 3 (LCM and D-flip-flop) initialization */
+#define CFG_EBC_PB3AP 0x158FF600
+#define CFG_EBC_PB3CR 0x50118000 /* BAS=0x501,BS=1MB,BU=R/W,BW=8bit */
+
+/* Memory Bank 4 (not install) initialization */
+#define CFG_EBC_PB4AP 0x158FF600
+#define CFG_EBC_PB4CR 0x5021A000
+
+/*-----------------------------------------------------------------------
+ * Definitions for GPIO setup (PPC405EP specific)
+ *
+ * GPIO0[0] - External Bus Controller BLAST output
+ * GPIO0[1-9] - Instruction trace outputs
+ * GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs
+ * GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs
+ * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs
+ * GPIO0[24-27] - UART0 control signal inputs/outputs
+ * GPIO0[28-29] - UART1 data signal input/output
+ * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs
+ */
+#define CFG_GPIO0_OSRH 0x15555550 /* output select high/low */
+#define CFG_GPIO0_OSRL 0x00000110
+#define CFG_GPIO0_ISR1H 0x00000001 /* input select high/low */
+#define CFG_GPIO0_ISR1L 0x15545440
+#define CFG_GPIO0_TSRH 0x00000000 /* three-state select high/low */
+#define CFG_GPIO0_TSRL 0x00000000
+#define CFG_GPIO0_TCR 0xFFFE8117 /* three-state control */
+#define CFG_GPIO0_ODR 0x00000000 /* open drain */
+
+#define GPIO0 0 /* GPIO controller 0 */
+
+/* the GPIO macros in include/ppc405.h for High/Low registers are backwards */
+
+#define GPIOx_OSL (GPIO0_OSRH-GPIO_BASE)
+#define GPIOx_TSL (GPIO0_TSRH-GPIO_BASE)
+#define GPIOx_IS1L (GPIO0_ISR1H-GPIO_BASE)
+#define GPIOx_IS2L (GPIO0_ISR1H-GPIO_BASE)
+#define GPIOx_IS3L (GPIO0_ISR1H-GPIO_BASE)
+
+#define GPIO_OS(x) (x+GPIOx_OSL) /* GPIO output select */
+#define GPIO_TS(x) (x+GPIOx_TSL) /* GPIO three-state select */
+#define GPIO_IS1(x) (x+GPIOx_IS1L) /* GPIO input select */
+#define GPIO_IS2(x) (x+GPIOx_IS1L)
+#define GPIO_IS3(x) (x+GPIOx_IS1L)
+
+#define CPLD_REG0_ADDR 0x50100000
+#define CPLD_REG1_ADDR 0x50100001
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
- #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+#endif /* __CONFIG_H */
diff --cc include/configs/zeus.h
index 86a16e77a5,0000000000..605755a87e
mode 100644,000000..100644
--- a/include/configs/zeus.h
+++ b/include/configs/zeus.h
@@@ -1,375 -1,0 +1,382 @@@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * zeus.h - configuration for Zeus board
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_ZEUS 1 /* Board is Zeus */
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_405EP 1 /* Specifc 405EP support*/
+
+#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
+
+#define PLLMR0_DEFAULT PLLMR0_333_111_55_111
+#define PLLMR1_DEFAULT PLLMR1_333_111_55_111
+
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+
+#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 0x01 /* PHY address */
+#define CONFIG_HAS_ETH1 1
+#define CONFIG_PHY1_ADDR 0x11 /* EMAC1 PHY address */
+#define CONFIG_NET_MULTI 1
+#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */
+#define CONFIG_PHY_RESET 1
+#define CONFIG_PHY_RESET_DELAY 300 /* PHY RESET recovery delay */
+
- #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_CACHE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_LOG | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO)
++/*
++ * BOOTP options
++ */
++#define CONFIG_BOOTP_BOOTFILESIZE
++#define CONFIG_BOOTP_BOOTPATH
++#define CONFIG_BOOTP_GATEWAY
++#define CONFIG_BOOTP_HOSTNAME
++
++/*
++ * Command line configuration.
++ */
++#include <config_cmd_default.h>
++
++#define CONFIG_CMD_ASKENV
++#define CONFIG_CMD_CACHE
++#define CONFIG_CMD_DHCP
++#define CONFIG_CMD_DIAG
++#define CONFIG_CMD_EEPROM
++#define CONFIG_CMD_ELF
++#define CONFIG_CMD_I2C
++#define CONFIG_CMD_IRQ
++#define CONFIG_CMD_LOG
++#define CONFIG_CMD_MII
++#define CONFIG_CMD_NET
++#define CONFIG_CMD_NFS
++#define CONFIG_CMD_PING
++#define CONFIG_CMD_REGINFO
+
+/* POST support */
+#define CONFIG_POST (CFG_POST_MEMORY | \
+ CFG_POST_CPU | \
+ CFG_POST_CACHE | \
+ CFG_POST_UART | \
+ CFG_POST_ETHER)
+
+#define CFG_POST_ETHER_EXT_LOOPBACK /* eth POST using ext loopack connector */
+
+/* Define here the base-addresses of the UARTs to test in POST */
+#define CFG_POST_UART_TABLE {UART0_BASE}
+
+#define CONFIG_LOGBUFFER
+#define CFG_POST_CACHE_ADDR 0x00800000 /* free virtual address */
+
+#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
+
- /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
- #include <cmd_confdefs.h>
-
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*-----------------------------------------------------------------------
+ * SDRAM
+ *----------------------------------------------------------------------*/
+/*
+ * SDRAM configuration (please see cpu/ppc/sdram.[ch])
+ */
+#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
+#define CONFIG_SDRAM_BANK1 1 /* init onboard SDRAM bank 1 */
+
+/* SDRAM timings used in datasheet */
+#define CFG_SDRAM_CL 3 /* CAS latency */
+#define CFG_SDRAM_tRP 20 /* PRECHARGE command period */
+#define CFG_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE command period */
+#define CFG_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */
+#define CFG_SDRAM_tRFC 66 /* Auto refresh period */
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
+#define CFG_BASE_BAUD 691200
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SERIAL_MULTI
+
+/* The following table includes the supported baudrates */
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
- #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+/* these are for the ST M24C02 2kbit serial i2c eeprom */
+#define CFG_I2C_EEPROM_ADDR 0x50 /* base address */
+#define CFG_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */
+/* mask of address bits that overflow into the "EEPROM chip address" */
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
+
+#define CFG_EEPROM_PAGE_WRITE_ENABLE 1 /* write eeprom in pages */
+#define CFG_EEPROM_PAGE_WRITE_BITS 3 /* 8 byte write page size */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
+
+/*
+ * The layout of the I2C EEPROM, used for bootstrap setup and for board-
+ * specific values, like ethaddr... that can be restored via the sw-reset
+ * button
+ */
+#define FACTORY_RESET_I2C_EEPROM 0x50
+#define FACTORY_RESET_ENV_OFFS 0x80
+#define FACTORY_RESET_ENV_SIZE 0x80
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xFF000000
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
+#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN)
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_FLASH_CFI /* The flash is CFI compatible */
+#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
+
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */
+
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
+#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#endif
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 16384 /* For IBM 405EP CPU */
+#define CFG_CACHELINE_SIZE 32 /* ... */
- #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
- #endif
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in data cache)
+ */
+/* use on chip memory (OCM) for temperary stack until sdram is tested */
+#define CFG_TEMP_STACK_OCM 1
+
+/* On Chip Memory location */
+#define CFG_OCM_DATA_ADDR 0xF8000000
+#define CFG_OCM_DATA_SIZE 0x1000
+#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of OCM */
+#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+/* reserve some memory for POST and BOOT limit info */
+#define CFG_INIT_SP_OFFSET (CFG_GBL_DATA_OFFSET - 16)
+
+/* extra data in OCM */
+#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 4)
+#define CFG_POST_MAGIC (CFG_OCM_DATA_ADDR + CFG_GBL_DATA_OFFSET - 8)
+#define CFG_POST_VAL (CFG_OCM_DATA_ADDR + CFG_GBL_DATA_OFFSET - 12)
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ */
+
+/* Memory Bank 0 (Flash 16M) initialization */
+#define CFG_EBC_PB0AP 0x05815600
+#define CFG_EBC_PB0CR 0xFF09A000 /* BAS=0xFF0,BS=16MB,BU=R/W,BW=16bit */
+
+/*-----------------------------------------------------------------------
+ * Definitions for GPIO setup (PPC405EP specific)
+ *
+ * GPIO0[0] - External Bus Controller BLAST output
+ * GPIO0[1-9] - Instruction trace outputs
+ * GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs
+ * GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs
+ * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs
+ * GPIO0[24-27] - UART0 control signal inputs/outputs
+ * GPIO0[28-29] - UART1 data signal input/output
+ * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs
+ */
+#define CFG_GPIO0_OSRH 0x15555550 /* Chip selects */
+#define CFG_GPIO0_OSRL 0x00000110 /* UART_DTR-pin 27 alt out */
+#define CFG_GPIO0_ISR1H 0x10000041 /* Pin 2, 12 is input */
+#define CFG_GPIO0_ISR1L 0x15505440 /* OUT: LEDs 22/23; IN: pin12,2, NVALID# */
+#define CFG_GPIO0_TSRH 0x00000000
+#define CFG_GPIO0_TSRL 0x00000000
+#define CFG_GPIO0_TCR 0xBFF68317 /* 3-state OUT: 22/23/29; 12,2 is not 3-state */
+#define CFG_GPIO0_ODR 0x00000000
+
+#define CFG_GPIO_SW_RESET 1
+#define CFG_GPIO_ZEUS_PE 12
+#define CFG_GPIO_LED_RED 22
+#define CFG_GPIO_LED_GREEN 23
+
+/* Time in milli-seconds */
+#define CFG_TIME_POST 5000
+#define CFG_TIME_FACTORY_RESET 10000
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
- #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/* ENVIRONMENT VARS */
+
+#define CONFIG_PREBOOT "echo;echo Welcome to Bulletendpoints board v1.1;echo"
+#define CONFIG_IPADDR 192.168.1.10
+#define CONFIG_SERVERIP 192.168.1.100
+#define CONFIG_GATEWAYIP 192.168.1.100
+#define CONFIG_ETHADDR 50:00:00:00:06:00
+#define CONFIG_ETH1ADDR 50:00:00:00:06:01
+#if 0
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "logversion=2\0" \
+ "hostname=zeus\0" \
+ "netdev=eth0\0" \
+ "ethact=ppc_4xx_eth0\0" \
+ "netmask=255.255.255.0\0" \
+ "ramdisk_size=50000\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw" \
+ " nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw" \
+ " ramdisk=${ramdisk_size}\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs} console=ttyS0," \
+ "${baudrate}\0" \
+ "net_nfs=tftp ${kernel_mem_addr} ${file_kernel};" \
+ "run nfsargs addip addtty;bootm\0" \
+ "net_ram=tftp ${kernel_mem_addr} ${file_kernel};" \
+ "tftp ${ramdisk_mem_addr} ${file_fs};" \
+ "run ramargs addip addtty;" \
+ "bootm ${kernel_mem_addr} ${ramdisk_mem_addr}\0" \
+ "rootpath=/target_fs/zeus\0" \
+ "kernel_fl_addr=ff000000\0" \
+ "kernel_mem_addr=200000\0" \
+ "ramdisk_fl_addr=ff300000\0" \
+ "ramdisk_mem_addr=4000000\0" \
+ "uboot_fl_addr=fffc0000\0" \
+ "uboot_mem_addr=100000\0" \
+ "file_uboot=/zeus/u-boot.bin\0" \
+ "tftp_uboot=tftp 100000 ${file_uboot}\0" \
+ "update_uboot=protect off fffc0000 ffffffff;" \
+ "era fffc0000 ffffffff;cp.b 100000 fffc0000 40000;" \
+ "protect on fffc0000 ffffffff\0" \
+ "upd_uboot=run tftp_uboot;run update_uboot\0" \
+ "file_kernel=/zeus/uImage_ba\0" \
+ "tftp_kernel=tftp 100000 ${file_kernel}\0" \
+ "update_kernel=protect off ff000000 ff17ffff;" \
+ "era ff000000 ff17ffff;cp.b 100000 ff000000 180000\0" \
+ "upd_kernel=run tftp_kernel;run update_kernel\0" \
+ "file_fs=/zeus/rootfs_ba.img\0" \
+ "tftp_fs=tftp 100000 ${file_fs}\0" \
+ "update_fs=protect off ff300000 ff87ffff;era ff300000 ff87ffff;"\
+ "cp.b 100000 ff300000 580000\0" \
+ "upd_fs=run tftp_fs;run update_fs\0" \
+ "bootcmd=chkreset;run ramargs addip addtty addmisc;" \
+ "bootm ${kernel_fl_addr} ${ramdisk_fl_addr}\0" \
+ ""
+
+#endif /* __CONFIG_H */