ARM: dts: stm32: Drop duplicate pinmux on DH STM32 DHCOM

The ethernet0_rmii_pins_a pinmux change has no effect on any
DHSOM based hardware. The mco2_pins_a and mco2_sleep_pins_a
are both part of stm32mp15-pinctrl.dtsi . Drop both pinmux
changes.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>

diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
index dd67e960a641c388ec6f465ad0890c0fe15ca997..0d9b2201e902917fb8a99bd8601b6f49618c36f0 100644 (file)
--- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
@@ -36,17 +36,6 @@
        /delete-property/ st,eth-ref-clk-sel;
 };
 
-&ethernet0_rmii_pins_a {
-       pins1 {
-               pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */
-                        <STM32_PINMUX('G', 14, AF11)>, /* ETH1_RMII_TXD1 */
-                        <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */
-                        <STM32_PINMUX('A', 1, AF11)>,  /* ETH1_RMII_REF_CLK */
-                        <STM32_PINMUX('A', 2, AF11)>,  /* ETH1_MDIO */
-                        <STM32_PINMUX('C', 1, AF11)>;  /* ETH1_MDC */
-       };
-};
-
 &i2c4 {
        bootph-all;
        bootph-pre-ram;
@@ -66,23 +55,6 @@
        /delete-property/ reset-gpios;
 };
 
-&pinctrl {
-       mco2_pins_a: mco2-0 {
-               pins {
-                       pinmux = <STM32_PINMUX('G', 2, AF1)>; /* MCO2 */
-                       bias-disable;
-                       drive-push-pull;
-                       slew-rate = <2>;
-               };
-       };
-
-       mco2_sleep_pins_a: mco2-sleep-0 {
-               pins {
-                       pinmux = <STM32_PINMUX('G', 2, ANALOG)>; /* MCO2 */
-               };
-       };
-};
-
 &pmic {
        bootph-all;
        bootph-pre-ram;