]> git.dujemihanovic.xyz Git - u-boot.git/shortlog
u-boot.git
2019-10-08 Peng Fanmisc: imx8: add more scfw api
2019-10-08 Peng Fanspl: nor: support loading i.MX container format file
2019-10-08 Peng Fanspl: spi: support loading i.MX container format file
2019-10-08 Peng Fanspl: nand: support loading i.MX container format file
2019-10-08 Peng Fanimx8: update README
2019-10-08 Peng Fanimx8: Add support to get container image set size
2019-10-08 Peng Fanspl: nand: Introduce spl_nand_get_uboot_raw_page
2019-10-08 Peng Fanspl: nor: introduce spl_nor_get_uboot_base
2019-10-08 Peng Fanspl: spi: introduce spl_spi_get_uboot_offs
2019-10-08 Peng Fanspl: mmc: introduce spl_mmc_get_uboot_raw_sector
2019-10-08 Peng Fanimx: Add i.MX8MM EVK board support.
2019-10-08 Peng Fanarm: dts: add i.MX8MM pin func
2019-10-08 Peng Fanarm: dts: import i.MX8MM dtsi
2019-10-08 Peng Fanimx8m: soc: probe clock device in arch_cpu_init_dm
2019-10-08 Peng Fanimx: mmc_env: update runtime SD/MMC boot env device
2019-10-08 Peng Fanimx8m: add clk support for i.MX8MM
2019-10-08 Peng Fanimx8m: restructure clock.h
2019-10-08 Peng Fanimx8m: rename clock to clock_imx8mq
2019-10-08 Peng Fanimx8m: restrict reset_cpu
2019-10-08 Peng Fanimx8m: soc: enable SCTR clock before timer init
2019-10-08 Ye Liimx8m: Configure trustzone region 0 for non-secure...
2019-10-08 Peng Fanimx8m: set BYPASS ID SWAP to avoid AXI bus errors
2019-10-08 Peng Fanimx8m: Fix MMU table issue for OPTEE memory
2019-10-08 Peng Fanimx: add i.MX8MM PE property
2019-10-08 Peng Fanimx8m: add pin header for i.MX8MM
2019-10-08 Peng Fanimx: add get_cpu_rev support for i.MX8MM
2019-10-08 Peng Fanimx8m: update imx-regs for i.MX8MM
2019-10-08 Peng Fanimx8m: imx-regs: drop unused register definitions
2019-10-08 Peng Fanimx: spl: add spl_board_boot_device for i.MX8MM
2019-10-08 Peng Fanimx: add i.MX8MM cpu type
2019-10-08 Peng Fanimx: imx8mm: add clock bindings header
2019-10-08 Peng Fanimx: add IMX8MM kconfig entry
2019-10-08 Peng Fanimx: add IMX8MQ kconfig entry
2019-10-08 Peng Fanimx8m: add image cfg for i.MX8MM lpddr4
2019-10-08 Peng Fanddr: imx8m: fix ddr firmware location when enable SPL OF
2019-10-08 Peng Fantools: imx8m_image: align spl bin image size
2019-10-08 Frieder Schrempfimx: mkimage_fit_atf: Fix FIT image for correct boot...
2019-10-08 Stefan RoeseKconfig: Set default BUILD_TARGET for ARCH_MX6 with SPL
2019-10-08 Stefan RoeseARM: imx: arch/arm/mach-imx/spl_qspi.cfg
2019-10-08 Stefan RoeseARM: imx: Add QSPI boot mode for i.MX6UL/ULL
2019-10-08 Anatolij Gustschinimx: mx6ul_14x14_evk: fix link issue
2019-10-08 Breno Matheus... imx: Kconfig: Reduce default CONFIG_CSF_SIZE
2019-10-08 Patrick Wildtimx: enable the reset controller on the i.MX8MQ EVK
2019-10-08 Patrick Wildtimx: add the i.MX8M reset controller node
2019-10-08 Patrick Wildtimx: add support for i.MX7/i.MX8MQ reset controller
2019-10-08 Patrick Wildtimx: add support for i.MX8MQ power domain controller
2019-10-08 Parthiban NallathambiARM: dts: pcl063: add usdhc reset pin of eMMC
2019-10-08 Fabio Estevamimx: mxs: Fix location for the elftosb tool
2019-10-08 Fabio Estevammx28evk: README: Fix location for the generic mxs README
2019-10-08 Anatolij Gustschinimx: wandboard: convert FEC support to DM_ETH
2019-10-08 Lukasz Majewskispi: Add support for SPL_OF_PLATDATA to mxs_gpio.c...
2019-10-08 Lukasz Majewskimmc: Replace printf with debug call for timeouts in...
2019-10-08 Lukasz Majewskimmc: Convert mxsmmc eMMC driver for i.MX2{38} to DM/DTS
2019-10-08 Lukasz Majewskispi: Add support for SPL_OF_PLATDATA to mxs_spi.c driver
2019-10-08 Lukasz Majewskispi: fix: Call mxs_reset_block() during DM/DTS probe
2019-10-08 Lukasz Majewskispl: Init proper struct driver member (platdata_auto_al...
2019-10-08 Lukasz Majewskidts: imx28: Remove #include "imx28.dtsi" from imx28...
2019-10-08 Lukasz Majewskiimx: Introduce CONFIG_SPL_FORCE_MMC_BOOT to force MMC...
2019-10-08 Lukasz Majewskiimx: Rewrite display5 get_board_id() function to use...
2019-10-08 Lukasz Majewskiimx: Convert emergency pad of display5 to use dm_gpio...
2019-10-08 Lukasz MajewskiARM: Update display5_factory_defconfig after switch...
2019-10-08 Lukasz MajewskiARM: display5: Remove common.c file (after DM/DTS U...
2019-10-08 Lukasz MajewskiDM: WDT: Convert WDT driver to use DM/DTS (including...
2019-10-08 Lukasz MajewskiARM: display5: Remove UART initialization code after...
2019-10-08 Lukasz MajewskiDM: SPI: Convert display5 to use SPI with DM/DTS (but...
2019-10-08 Lukasz MajewskiDM: eth: Switch display5 board to use DM_ETH
2019-10-08 Lukasz MajewskiDM: mmc: Switch display5 board to use DM_MMC and BLK...
2019-10-08 Lukasz MajewskiARM: imx: defconfig: Enable 'regulator' and 'pmic'...
2019-10-08 Lukasz MajewskiDM: I2C: Switch display5 board to use DM_I2C
2019-10-08 Lukasz MajewskiARM: imx: defconfig: Enable CONFIG_PINCTRL{_IMX6} on...
2019-10-08 Lukasz Majewskifix: defconfig: Enable OF_CONTROL for display5_factory
2019-10-08 Lukasz Majewskiimx: bk4: Print proper HW revision of VF610's BK4 board
2019-10-08 Fabio Estevampico-imx6: Add Falcon mode
2019-10-08 Fabio Estevampico-imx6: Add splashscreen support
2019-10-08 Fabio Estevampico-imx6: Add Ethernet support
2019-10-08 Otavio Salvadorpico-imx6: Fix bootmenu handling
2019-10-08 Fabio Estevampico-imx6: Add initial support
2019-10-08 Fabio Estevammx6: clock: Allow enable_ipu_clock() to be built for...
2019-10-08 Fabio Estevammx53loco: Fix U-Boot corruption after saving the enviro...
2019-10-08 Stefano Babicboard: imx6dl_mamoj: set the value for CSF size
2019-10-08 Otavio Salvadorconfigs: Sync all baseboard specific pico-imx7d
2019-10-08 Joris Offougaconfigs: pico-imx7d: Convert to DM_VIDEO
2019-10-08 Joris OffougaARM: dts: pico-imx7d: sync device tree with v5.3-rc6
2019-10-08 Joris OffougaARM: dts: pico-imx7d: Add u-boot.dtsi for uboot specifi...
2019-10-08 Stefano Babicimx: fix missing MAINTAINERS pico boards
2019-10-08 Anatolij Gustschinimx: sksimx6_defconfig: remove SPL misc option to fix...
2019-10-08 Fabio Estevampico: Convert to CONFIG_FSL_USDHC
2019-10-08 Fabio Estevamlogos: Add the TechNexion's logo
2019-10-08 Fabio Estevampico-imx7d: Provide a way to escape the Falcon mode
2019-10-08 Fabio Estevampico-imx7d: Add instructions for booting in Falcon...
2019-10-08 Otavio Salvadorpico-imx7d: Add NYMPH baseboard support
2019-10-08 Otavio Salvadorpico-imx7d: Add DWARF baseboard support
2019-10-08 Fabio Bertonpico-imx7d: Sync pico-hobbit-imx7d_defconfig
2019-10-08 Fabio Estevampico-imx6ul: Provide a way to escape the Falcon mode
2019-10-08 Fabio Estevampico-imx6ul: Update the Falcon mode instructions
2019-10-08 Fabio Estevampico-imx6ul: Add LCD support
2019-10-08 Fabio Estevampico-imx6ul: Increase the CONFIG_ENV_OFFSET size
2019-10-08 Otavio Salvadorpico-imx6ul: Add DWARF baseboard support
2019-10-08 Stefano BabicRevert "habv4: tools: Avoid hardcoded CSF size for...
2019-10-08 Breno Matheus... habv4: tools: Avoid hardcoded CSF size for SPL targets
next