]> git.dujemihanovic.xyz Git - u-boot.git/shortlog
u-boot.git
2016-04-16 Stephen WarrenARM: rpi: fix 64-bit CONFIG_SYS_TEXT_BASE
2016-04-15 Tom Rinidrivers/tpm/tpm_tis_sandbox.c: Fix uninitialized variab...
2016-04-15 Stephen Warrenfdt: implement dev_get_addr_name()
2016-04-15 Tom Rinisandbox: Enable many more commands
2016-04-14 Tom Rinitest/dm/core.c: Make pre-reloc test use pre-reloc struct
2016-04-14 Jagan Tekiboard: README.sandbox: Update dm test command
2016-04-14 Jagan Tekidoc: driver-model: Update dm tests run using test.py
2016-04-14 Stefan Roesedm: device.c: Minor coding-style fix
2016-04-14 Nishanth Menondm: part: fix missing driver name in debug print
2016-04-14 Peng Fandm: core: device: set pinctrl state for pinctrl device
2016-04-13 Tom Rinixpress: Update <usb/ehci-fsl.h> include
2016-04-13 Tom RiniMerge branch 'master' of git://www.denx.de/git/u-boot...
2016-04-13 Michal SimekARM64: zynqmp: Use i2c cadence DM driver
2016-04-13 Moritz Fischerdm: i2c: Add driver for Cadence I2C IP
2016-04-13 Moritz Fischeri2c: Describe Cadence I2C devicetree bindings
2016-04-13 Michal SimekARM64: zynqmp: Enable pca953x driver for zcu102
2016-04-13 Michal SimekGPIO: pca953x: Remove compilation warnings on arm64
2016-04-13 Michal SimekARM64: zynqmp: Enable CMD_GPIO and DM_GPIO for ep108
2016-04-13 Siva Durga... zynqmp: Kconfig: Enable ZYNQ_GPIO for ZynqMP
2016-04-13 Siva Durga... gpio: zynqmp: Add GPIO driver support for ZynqMP
2016-04-13 Siva Durga... gpio: zynq: Move the definitions to driver file
2016-04-13 Siva Durga... gpio: zynq: Remove non driver model code
2016-04-13 Siva Durga... gpio: Kconfig: Enable Zynq GPIO driver using kconfig
2016-04-13 Siva Durga... gpio: zynq: Convert Zynq GPIO to driver model
2016-04-13 Michal SimekARM64: zynqmp: Clean header after moving stuff to Kconfig
2016-04-13 Michal SimekARM64: zynqmp: Add support for zc1751 with DC cards
2016-04-13 Michal SimekARM64: zynqmp: Add defconfig for zcu102 revB board
2016-04-13 Michal SimekARM64: zynqmp: Add support for ZCU102 platform
2016-04-13 Michal SimekARM64: zynqmp: Remove netdev.h from board file
2016-04-13 Michal SimekARM64: zynqmp: Make DDR detection code work on 32bit...
2016-04-13 Michal SimekARM64: zynqmp: Extend early malloc space to be able...
2016-04-13 Michal SimekARM64: zynqmp: Do not setup DM_ETH/GPIO/MMC by default...
2016-04-13 Punnaiah Choudary... ARM64: zynqmp: Add missing nand node for ep108
2016-04-13 Anurag Kumar... ARM64: zynqmp: Added OOB timing settings in zynqmp...
2016-04-13 Michal SimekARM64: zynqmp: Use 64bit size cell format for memory...
2016-04-13 Michal SimekARM64: zynqmp: Fix DWC3 binding with the kernel
2016-04-13 Michal SimekARM64: zynqmp: Add serdes address space dp driver
2016-04-13 Michal SimekARM64: zynqmp: Align register description
2016-04-13 Hyun KwonARM64: zynqmp: dp: Add default properties to zynqmp...
2016-04-13 Hyun KwonARM64: zynqmp: Use correct addresses in node names
2016-04-13 Michal SimekARM64: zynqmp: Align node address with parent node...
2016-04-13 Michal SimekARM64: zynqmp: Add backward compatible string for uart
2016-04-13 Michal SimekARM64: zynqmp: Fix coding style for pcie
2016-04-13 Bharat Kumar... ARM64: zynqmp: Extend pcie node to support legacy inter...
2016-04-13 Michal SimekARM64: zynqmp: Add interrupt-controller property to...
2016-04-13 Naga Sureshkumar... ARM64: zynqmp: Add ddrc node in dts
2016-04-13 VNSL DurgaARM64: zynqmp: Added clocks to DT
2016-04-13 Michal SimekARM64: zynqmp: Add CCI-400 node
2016-04-13 Michal SimekARM64: zynqmp: Add missing interrupt-parent to PMU...
2016-04-13 Soren BrinkmannARM64: zynqmp: DT: Add power domains
2016-04-13 P L Sai KrishnaARM64: zynqmp: Added broken-tuning property to SD,...
2016-04-13 Michal SimekARM64: zynqmp: Sync GEM nodes with Linux
2016-04-13 Edgar E. IglesiasARM64: zynqmp: Hook up the GEMs to the SMMU
2016-04-13 Edgar E. IglesiasARM64: zynqmp: Correct IRQ nr for the SMMU
2016-04-13 P L Sai KrishnaARM64: zynqmp: Add 8-bit bus width property.
2016-04-13 Ranjit WaghmodeARM64: zynqmp: dt: Change qspi node compatible string
2016-04-13 Michal SimekARM64: zynqmp: Add missing mmc aliases
2016-04-13 Alistair FrancisARM64: zynqmp: Use C pre-processor for includes in dts
2016-04-13 Siva Durga... ARM64: zynqmp: Move kernel and fdt offsets and sizes...
2016-04-13 Michal SimekARM: zynq: Do not perform reset at the end of thor
2016-04-13 Michal SimekARM: zynq: Support systems with more memory banks
2016-04-13 Michal SimekARM: zynq: Use memory initialization based on DTS file
2016-04-13 Michal SimekARM: zynq: Fix usb phy node for Zybo
2016-04-13 Michal SimekARM: zynq: Extend microzed board support
2016-04-13 Michal SimekARM: zynq: Add missing qspi for xm013
2016-04-13 Michal SimekARM: zynq: Create empty line below headers
2016-04-13 Michal SimekARM: zynq: Align spi and qspi node locations
2016-04-13 Christian KohnARM: zynq: zc706: Add adv7511 on i2c bus
2016-04-13 Christian KohnARM: zynq: zc702: Add adv7511 on i2c bus
2016-04-13 Punnaiah Choudary... ARM: zynq: DT: Add ethernet phy reset information
2016-04-13 Michal SimekARM: zynq: Fix bootargs in board dtsi
2016-04-13 Michal SimekARM: zynq: Align devcfg node
2016-04-13 Moritz FischerARM: dts: Updated devicetree bindings for Zynq 7000...
2016-04-13 Moritz FischerARM: dts: zynq: Add devicetree entry for Xilinx Zynq...
2016-04-13 Michal SimekARM: zynq: Add interrupt-controller property to gpio...
2016-04-13 Tom RiniMerge git://www.denx.de/git/u-boot-cfi-flash
2016-04-13 Rouven Behrmtd: cfi: Unlock current sector instead of sector 0...
2016-04-13 Tom RiniMerge branch 'master' of git://www.denx.de/git/u-boot-imx
2016-04-12 Tom RiniMerge git://www.denx.de/git/u-boot-marvell
2016-04-12 Stefan Roesearm: mvebu: theadorable: Remove Board name output in...
2016-04-12 Stefan Roesearm: mvebu: theadorable: Add PEX-switch detection and...
2016-04-12 Stefan Roesearm: mvebu: theadorable: Enable 2nd I2C controller
2016-04-12 Stefan Roesearm: mvebu: Add base address for 2nd I2C controller
2016-04-12 Stefan Roesearm: mvebu: theadorable: Add bootcounter support
2016-04-12 Stefan Roesearm: mvebu: theadorable: Add USB power toggle and tweak...
2016-04-12 Stefan Roesegpio: mvebu_gpio: Add missing out value set to gpio_dir...
2016-04-12 Hans de Goedesunxi: Add defconfig and dts file for Orange Pi One SBC
2016-04-12 Hans de Goedesunxi: H3: Do not clear usb companion clk-gate / reset...
2016-04-12 Hans de Goedesunxi: Enable CMD_GPIO on all sunxi boards
2016-04-12 Hans de Goedesunxi: Enable usb ports on the Sinovoip BPI M3
2016-04-12 Hans de Goedesunxi: Set DCDC1 to 3.3V on the Sinovoip BPI M3
2016-04-12 Hans de Goedesunxi: Add INITIAL_USB_SCAN_DELAY Kconfig option
2016-04-12 Tom RiniPrepare v2016.05-rc1
2016-04-12 Steve Raefastboot: sparse: remove unnecessary logging
2016-04-12 Steve Raefastboot: sparse: fix block addressing for don't care...
2016-04-12 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-arc
2016-04-12 Lokesh Vutlaspl: mmc: raw: Try to load u-boot if Linux image is...
2016-04-12 Hans de Goedearm: Replace v7_maint_dcache_all(ARMV7_DCACHE_INVAL_ALL...
2016-04-12 Hans de Goedearm: Replace v7_maint_dcache_all(ARMV7_DCACHE_CLEAN_INV...
2016-04-12 Stefan Roeselib/crc8: Add crc start value
next