]> git.dujemihanovic.xyz Git - u-boot.git/shortlog
u-boot.git
2020-10-27 Michal Simekxilinx: zynqmp: Do not check 0 as invalid return from...
2020-10-27 Michal Simekxilinx: zynqmp: Fix debug message in zynqmp_get_silicon...
2020-10-27 Michal Simekxilinx: zynqmp: Check return value from xilinx_pm_request()
2020-10-27 Michal Simekxilinx: board: Add FRU decoder support
2020-10-27 Michal Simekxilinx: cmd: Add basic fru format generator
2020-10-27 Siva Durga... xilinx: cmd: Add support for FRU commands
2020-10-27 Michal Simekxilinx: common: Add Makefile to common folder
2020-10-27 Michal Simekmicroblaze: Enable i2c DM by default
2020-10-27 Michal Simekxilinx: common: Protect board_late_init_xilinx()
2020-10-27 Michal Simekxilinx: common: Move ZYNQ_GEM_I2C_MAC_OFFSET to board...
2020-10-27 Michal Simekspl: fdt: Record load/entry fit-images entries in 64bit...
2020-10-27 Michal Simekspl: Use standard FIT entries
2020-10-27 T Karthik Reddyspi: zynq_qspi: Use clk subsystem to get reference...
2020-10-27 T Karthik Reddyspi: zynq_spi: Use clk subsystem to get reference spi clk
2020-10-27 Michal Simekserial: pl01x: Add error value checking
2020-10-27 Michal Simekxilinx: board: Add support for additional card detection
2020-10-27 Michal Simekxilinx: board: Read the whole eeprom not just offset
2020-10-27 Michal Simekdm: core: Add support for getting node from aliases
2020-10-27 T Karthik Reddyspi: xilinx_spi: remove unused local variable
2020-10-27 Michal Simekdt-bindings: arm64: versal: Add clk and power headers
2020-10-27 Michal Simekarm64: zynqmp: Add support for saving sha3 key to diffe...
2020-10-27 T Karthik Reddyarm64: zynqmp: Add support for SHA3 command
2020-10-27 T Karthik Reddyarm64: zynqmp: Add support for RSA command
2020-10-27 Siva Durga... arm64: zynqmp: Add support for encryption and decryptio...
2020-10-27 Michal Simekarm64: zynqmp: Get rid of iommus/power-domains properti...
2020-10-27 Michal Simekarm64: zynqmp: Enable cache command
2020-10-27 Michal Simekarm64: zynqmp: Enable FPGA loading from SPL
2020-10-27 Michal Simekarm64: zynqmp: Get rid of simple_itoa and replace it...
2020-10-27 Michal Simekmailbox: zynqmp: Extend timeout for getting observation bit
2020-10-27 Michal Simekfirmware: zynqmp: Swap addr_hi/low when PM_FPGA_LOAD...
2020-10-27 Ashok Reddy... config: versal: Update mini u-boot timer clock to 100Mhz
2020-10-27 Ashok Reddy... arm64: versal: Update mini u-boot eMMC node parameters
2020-10-27 T Karthik Reddymicroblaze: Add support for distro boot
2020-10-27 T Karthik Reddymicroblaze: Setup distro boot env variables at run...
2020-10-27 T Karthik Reddymicroblaze: board: Check return value whlie saving...
2020-10-27 T Karthik Reddymicroblaze: trivial code fixes
2020-10-27 T Karthik Reddymicroblaze: Enable spi for microblaze
2020-10-27 Michal Simekspi: xilinx_spi: Remove unused variable
2020-10-27 Michal Simekarm64: zynqmp: Enable EMMC boot
2020-10-27 Michal Simekarm64: zynqmp: Add missing support for 9cg version
2020-10-27 Alexandre GRIVEAUXARM: zynq: Add Z-turn board V5
2020-10-27 Michal Simekdoc: board: xilinx: Add documentation for ZynqMP R5
2020-10-27 Michal Simekdoc: board: xilinx: Add documentation for ZynqMP
2020-10-27 Michal Simekdoc: board: xilinx: Update links to DT binding docs
2020-10-27 Michal Simekdoc: board: xilinx: zynq.rst: Update zynq documentation
2020-10-27 Michal SimekMAINTAINERS: Record documentation for Xilinx platforms
2020-10-27 Ovidiu Panaitmicroblaze: start.S: Use board_init_f_alloc/init in...
2020-10-27 Ovidiu Panaitmicroblaze: start.S: Factor out exception setup code...
2020-10-24 Tom RiniMerge branch '2020-10-23-misc-changes'
2020-10-23 Peng Fanpower: regulator: add dummy helper
2020-10-23 Peng Fanphy: nop-phy: add clk bulk
2020-10-23 Jaehoon Chungbootm: fix wrong conditions about images overlap
2020-10-23 Lad Prabhakarcmd: fat: Use do_save() for fatwrite
2020-10-23 Heinrich Schuchardttest: unit tests for print_freq(), print_size()
2020-10-23 Bin Mengcmd: Add a 'misc' command to access miscellaneous devices
2020-10-23 Bin Mengcmd: Split out timer command from the sleep command
2020-10-23 Bin Mengcmd: Rename CMD_MISC to CMD_SLEEP
2020-10-23 Pali RohárMakefile: Fix u-boot-nodtb.bin target
2020-10-23 Patrick Delaunayi2c: i2c-gpio: Convert to use APIs which support live DT
2020-10-23 Patrick Delaunaypower: regulator: gpio-regulator: Convert to use APIs...
2020-10-23 Patrick Delaunaypower: regulator: gpio-regulator: protect count value
2020-10-23 Heinrich Schuchardtpost: remove redundant condition
2020-10-23 Tom RiniMerge branch 'master' of https://gitlab.denx.de/u-boot...
2020-10-23 Tom RiniMerge branch '2020-10-23-revert-xen-changes'
2020-10-23 Tom RiniRevert "serial: serial_xen: print U-Boot banner and...
2020-10-23 Tom RiniRevert "arch: arm/xen: add putc() for debugging"
2020-10-23 Tom RiniRevert "xen: add definitions for console_io"
2020-10-23 Tom RiniRevert "serial: serial_xen: add DEBUG_UART support"
2020-10-23 Tom RiniMerge branch 'master' of https://gitlab.denx.de/u-boot...
2020-10-22 Tom RiniMerge branch '2020-10-22-misc-changes'
2020-10-22 Heiko Schocherrtc: move pcf8563 to Kconfig
2020-10-22 Fabien Parentmmc: mtk-sd: change some dev_err into dev_dbg
2020-10-22 AKASHI Takahiroserial: serial_xen: add DEBUG_UART support
2020-10-22 AKASHI Takahiroxen: add definitions for console_io
2020-10-22 AKASHI Takahiroarch: arm/xen: add putc() for debugging
2020-10-22 AKASHI Takahiroserial: serial_xen: print U-Boot banner and others
2020-10-22 Chia-Wei, Wangcosmetic: reset: ast2500: Rename driver and configs
2020-10-22 Chia-Wei, Wangreset: ast2500: Use SCU for reset control
2020-10-22 Dario Binacchiclk: ccf: replace the get_rate helper
2020-10-22 Chance.Yangdoc: dfu: fix typo in README.dfu
2020-10-22 Simon Glasslog: Tidy up documentation
2020-10-22 Naoki HayamaARM: mvebu: a38x: Fix comment typo
2020-10-22 Naoki Hayamafs: btrfs: Fix typo in error message
2020-10-22 Naoki Hayamammc: Fix comment typo
2020-10-22 Patrick DelaunayRemove default value of CONFIG_PREBOOT for CONFIG_USB_S...
2020-10-22 Dario Binacchigpio: fix gpio_request_by_name() description
2020-10-22 Dario Binacchidm: core: improve uclass_get_device_by_phandle_id(...
2020-10-22 Holger Brunckkm/common: change ubicopy variable
2020-10-22 Holger Brunckkm: adapt defines and variables for new memory layout
2020-10-22 Heinrich Schuchardtlib: print_freq() should output kHz not KHz
2020-10-22 Robert MarkoIPQ40xx: Add PRNG support
2020-10-22 Robert Markorng: Add Qualcomm MSM PRNG driver
2020-10-22 Robert MarkoIPQ40xx: Add support for MDIO
2020-10-22 Robert Markonet: Add IPQ40xx MDIO driver
2020-10-22 Robert MarkoIPQ40xx: Add SPI support
2020-10-22 Robert Markospi: Add Qualcomm QUP SPI controller driver
2020-10-22 Heinrich Schuchardttools: image-host.c: use correct output format
2020-10-22 Holger Brunckkm: fix license string and compatible strings
2020-10-22 Naoki HayamaREADME: Convert HTTP links to HTTPS
2020-10-22 Naoki HayamaREADME: vxworks: Fix typo overwride
next