From e88d6979d1fa0a11468204fa729229afc49d5bde Mon Sep 17 00:00:00 2001 From: Mark Kettenis Date: Mon, 27 Apr 2020 11:09:47 +0200 Subject: [PATCH] regulator: fix: enable gpio when requested The fix in commit b7adcdd073c0 has the side-effect that the regulator will be disabled when requesting the relevant gpio in regulator_common_ofdata_to_platdata() and enabled in regulator_pre_probe() when the regulator was already enabled. This leads to a short interruption in the 3.3V power to the PCIe slot on the firefly-rk3399 which makes an ADATA SX8000NP NVMe SSD unhappy. Fix this by setting the GPIOD_IS_OUT_ACTIVE flag again when the 'regulator-boot-on' property is set, but check for this property explicitly instead of relying on the "boot_on" member of the uclass platdata. Signed-off-by: Mark Kettenis Tested-by: Patrice Chotard --- drivers/power/regulator/regulator-uclass.c | 3 --- drivers/power/regulator/regulator_common.c | 2 ++ 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/power/regulator/regulator-uclass.c b/drivers/power/regulator/regulator-uclass.c index 7dcb317192..da679a572c 100644 --- a/drivers/power/regulator/regulator-uclass.c +++ b/drivers/power/regulator/regulator-uclass.c @@ -466,9 +466,6 @@ static int regulator_pre_probe(struct udevice *dev) (uc_pdata->min_uA == uc_pdata->max_uA)) uc_pdata->flags |= REGULATOR_FLAG_AUTOSET_UA; - if (uc_pdata->boot_on) - regulator_set_enable(dev, uc_pdata->boot_on); - return 0; } diff --git a/drivers/power/regulator/regulator_common.c b/drivers/power/regulator/regulator_common.c index 16d9412cd5..4cfcc31298 100644 --- a/drivers/power/regulator/regulator_common.c +++ b/drivers/power/regulator/regulator_common.c @@ -19,6 +19,8 @@ int regulator_common_ofdata_to_platdata(struct udevice *dev, if (!dev_read_bool(dev, "enable-active-high")) flags |= GPIOD_ACTIVE_LOW; + if (dev_read_bool(dev, "regulator-boot-on")) + flags |= GPIOD_IS_OUT_ACTIVE; /* Get optional enable GPIO desc */ gpio = &dev_pdata->gpio; -- 2.39.5