From e54882aefb5c906e460cb7c84bb072f360b29680 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 16 Feb 2023 07:08:49 -0300 Subject: [PATCH] mx6sabresd: Convert to DM_PMIC The usage of DM_PMIC is preferred, so convert to it. This also brings the benefit of causing a significant amount of code removal. Signed-off-by: Fabio Estevam Reviewed-by: Peng Fan --- board/freescale/mx6sabresd/mx6sabresd.c | 63 +++++-------------------- configs/mx6sabresd_defconfig | 11 ++--- include/configs/mx6sabresd.h | 3 -- 3 files changed, 17 insertions(+), 60 deletions(-) diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index 8c35230855..96a76b0581 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include @@ -28,7 +27,6 @@ #include #include #include -#include #include #include #include @@ -49,14 +47,6 @@ DECLARE_GLOBAL_DATA_PTR; #define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) -#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ - PAD_CTL_ODE | PAD_CTL_SRE_FAST) - -#define I2C_PMIC 1 - -#define I2C_PAD MUX_PAD_CTRL(I2C_PAD_CTRL) - #define DISP0_PWR_EN IMX_GPIO_NR(1, 21) #define KEY_VOL_UP IMX_GPIO_NR(1, 4) @@ -174,32 +164,6 @@ static void enable_lvds(struct display_info_t const *dev) enable_backlight(); } -static struct i2c_pads_info mx6q_i2c_pad_info1 = { - .scl = { - .i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | I2C_PAD, - .gpio_mode = MX6Q_PAD_KEY_COL3__GPIO4_IO12 | I2C_PAD, - .gp = IMX_GPIO_NR(4, 12) - }, - .sda = { - .i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | I2C_PAD, - .gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO4_IO13 | I2C_PAD, - .gp = IMX_GPIO_NR(4, 13) - } -}; - -static struct i2c_pads_info mx6dl_i2c_pad_info1 = { - .scl = { - .i2c_mode = MX6DL_PAD_KEY_COL3__I2C2_SCL | I2C_PAD, - .gpio_mode = MX6DL_PAD_KEY_COL3__GPIO4_IO12 | I2C_PAD, - .gp = IMX_GPIO_NR(4, 12) - }, - .sda = { - .i2c_mode = MX6DL_PAD_KEY_ROW3__I2C2_SDA | I2C_PAD, - .gpio_mode = MX6DL_PAD_KEY_ROW3__GPIO4_IO13 | I2C_PAD, - .gp = IMX_GPIO_NR(4, 13) - } -}; - static void setup_spi(void) { SETUP_IOMUX_PADS(ecspi1_pads); @@ -495,10 +459,7 @@ int board_init(void) #ifdef CONFIG_MXC_SPI setup_spi(); #endif - if (is_mx6dq() || is_mx6dqp()) - setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c_pad_info1); - else - setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info1); + #if defined(CONFIG_VIDEO_IPUV3) setup_display(); #endif @@ -511,29 +472,32 @@ int board_init(void) int power_init_board(void) { - struct pmic *p; + struct udevice *dev; unsigned int reg; int ret; - p = pfuze_common_init(I2C_PMIC); - if (!p) - return -ENODEV; + ret = pmic_get("pfuze100@8", &dev); + if (ret == -ENODEV) + return 0; + + if (ret != 0) + return ret; - ret = pfuze_mode_init(p, APS_PFM); + ret = pfuze_mode_init(dev, APS_PFM); if (ret < 0) return ret; /* Increase VGEN3 from 2.5 to 2.8V */ - pmic_reg_read(p, PFUZE100_VGEN3VOL, ®); + reg = pmic_reg_read(dev, PFUZE100_VGEN3VOL); reg &= ~LDO_VOL_MASK; reg |= LDOB_2_80V; - pmic_reg_write(p, PFUZE100_VGEN3VOL, reg); + pmic_reg_write(dev, PFUZE100_VGEN3VOL, reg); /* Increase VGEN5 from 2.8 to 3V */ - pmic_reg_read(p, PFUZE100_VGEN5VOL, ®); + reg = pmic_reg_read(dev, PFUZE100_VGEN5VOL); reg &= ~LDO_VOL_MASK; reg |= LDOB_3_00V; - pmic_reg_write(p, PFUZE100_VGEN5VOL, reg); + pmic_reg_write(dev, PFUZE100_VGEN5VOL, reg); return 0; } @@ -902,7 +866,6 @@ void board_init_f(ulong dummy) ccgr_init(); gpr_init(); - /* iomux and setup of i2c */ board_early_init_f(); /* setup GP timer */ diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig index 965536cfb6..2770b12598 100644 --- a/configs/mx6sabresd_defconfig +++ b/configs/mx6sabresd_defconfig @@ -11,9 +11,6 @@ CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0xC0000 CONFIG_MX6QDL=y CONFIG_TARGET_MX6SABRESD=y -CONFIG_SYS_I2C_MXC_I2C1=y -CONFIG_SYS_I2C_MXC_I2C2=y -CONFIG_SYS_I2C_MXC_I2C3=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="imx6q-sabresd" CONFIG_SPL_TEXT_BASE=0x00908000 @@ -82,7 +79,6 @@ CONFIG_FASTBOOT_BUF_SIZE=0x10000000 CONFIG_FASTBOOT_FLASH=y CONFIG_FASTBOOT_FLASH_MMC_DEV=2 CONFIG_DM_I2C=y -CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MXC=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_USDHC=y @@ -100,11 +96,12 @@ CONFIG_PCI_SCAN_SHOW=y CONFIG_PCIE_IMX=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y -CONFIG_POWER_LEGACY=y -CONFIG_POWER_PFUZE100=y +CONFIG_DM_PMIC=y +CONFIG_DM_PMIC_PFUZE100=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y -CONFIG_POWER_I2C=y +CONFIG_DM_REGULATOR_PFUZE100=y +CONFIG_DM_REGULATOR_GPIO=y CONFIG_DM_SERIAL=y CONFIG_MXC_UART=y CONFIG_SPI=y diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h index 30d3b9d930..844f10e422 100644 --- a/include/configs/mx6sabresd.h +++ b/include/configs/mx6sabresd.h @@ -24,9 +24,6 @@ #define CFG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(3, 19) #endif -/* PMIC */ -#define CFG_POWER_PFUZE100_I2C_ADDR 0x08 - /* USB Configs */ #ifdef CONFIG_CMD_USB #define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -- 2.39.5