From e07f76b25debf224a0283671f0b9ab0912a7ac0a Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 8 Oct 2020 15:14:58 +0200 Subject: [PATCH] ARM: dts: stm32: Do not set eth1addr if KS8851 has EEPROM In case the KS8851 has external EEPROM attached to it, do not set eth1addr at all. The network stack will read the MAC out of the KS8851 and set eth1addr accordingly. Signed-off-by: Marek Vasut Cc: Patrice Chotard Cc: Patrick Delaunay Reviewed-by: Patrice Chotard Reviewed-by: Patrick Delaunay --- board/dhelectronics/dh_stm32mp1/board.c | 40 ++++++++++++++++++++++--- 1 file changed, 36 insertions(+), 4 deletions(-) diff --git a/board/dhelectronics/dh_stm32mp1/board.c b/board/dhelectronics/dh_stm32mp1/board.c index c9abe3cc6d..f42d395098 100644 --- a/board/dhelectronics/dh_stm32mp1/board.c +++ b/board/dhelectronics/dh_stm32mp1/board.c @@ -81,6 +81,11 @@ */ DECLARE_GLOBAL_DATA_PTR; +#define KS_CCR 0x08 +#define KS_CCR_EEPROM BIT(9) +#define KS_BE0 BIT(12) +#define KS_BE1 BIT(13) + int setup_mac_address(void) { unsigned char enetaddr[6]; @@ -97,12 +102,39 @@ int setup_mac_address(void) if (off < 0) { /* ethernet1 is not present in the system */ skip_eth1 = true; - } else { - ret = eth_env_get_enetaddr("eth1addr", enetaddr); - if (ret) /* eth1addr is already set */ - skip_eth1 = true; + goto out_set_ethaddr; + } + + ret = eth_env_get_enetaddr("eth1addr", enetaddr); + if (ret) { + /* eth1addr is already set */ + skip_eth1 = true; + goto out_set_ethaddr; + } + + ret = fdt_node_check_compatible(gd->fdt_blob, off, "micrel,ks8851-mll"); + if (ret) + goto out_set_ethaddr; + + /* + * KS8851 with EEPROM may use custom MAC from EEPROM, read + * out the KS8851 CCR register to determine whether EEPROM + * is present. If EEPROM is present, it must contain valid + * MAC address. + */ + u32 reg, ccr; + reg = fdt_get_base_address(gd->fdt_blob, off); + if (!reg) + goto out_set_ethaddr; + + writew(KS_BE0 | KS_BE1 | KS_CCR, reg + 2); + ccr = readw(reg); + if (ccr & KS_CCR_EEPROM) { + skip_eth1 = true; + goto out_set_ethaddr; } +out_set_ethaddr: if (skip_eth0 && skip_eth1) return 0; -- 2.39.5