From cc48c2a5cfdbd883078f6b17608090482e5f60ca Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 17 May 2019 16:58:54 +0200 Subject: [PATCH] ARM: imx: dh-imx6: Convert SPI support to DM Enable DM SPI and SF support on DHCOM iMX6 PDK2. Convert board code to match the DM support. Signed-off-by: Marek Vasut Cc: Fabio Estevam Cc: Ludwig Zenz Cc: Stefano Babic --- board/dhelectronics/dh_imx6/dh_imx6.c | 10 ---------- configs/dh_imx6_defconfig | 4 ++++ include/configs/dh_imx6.h | 5 +++++ 3 files changed, 9 insertions(+), 10 deletions(-) diff --git a/board/dhelectronics/dh_imx6/dh_imx6.c b/board/dhelectronics/dh_imx6/dh_imx6.c index 737d9c6be3..50e3cb50a3 100644 --- a/board/dhelectronics/dh_imx6/dh_imx6.c +++ b/board/dhelectronics/dh_imx6/dh_imx6.c @@ -272,16 +272,6 @@ int board_early_init_f(void) return 0; } -#ifdef CONFIG_MXC_SPI -int board_spi_cs_gpio(unsigned bus, unsigned cs) -{ - if (bus == 0 && cs == 0) - return IMX_GPIO_NR(2, 30); - else - return -1; -} -#endif - int board_init(void) { struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; diff --git a/configs/dh_imx6_defconfig b/configs/dh_imx6_defconfig index 60faff8bdc..70f0277040 100644 --- a/configs/dh_imx6_defconfig +++ b/configs/dh_imx6_defconfig @@ -47,13 +47,16 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_DWC_AHSATA=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_FSL_ESDHC=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_MODE=0 CONFIG_SF_DEFAULT_SPEED=25000000 +CONFIG_SPI_FLASH_SFDP_SUPPORT=y CONFIG_SPI_FLASH_GIGADEVICE=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_WINBOND=y +CONFIG_SPI_FLASH_MTD=y CONFIG_PHYLIB=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y @@ -63,6 +66,7 @@ CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y CONFIG_DM_SCSI=y CONFIG_SPI=y +CONFIG_DM_SPI=y CONFIG_MXC_SPI=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h index e68467dda3..3b1d0a99a1 100644 --- a/include/configs/dh_imx6.h +++ b/include/configs/dh_imx6.h @@ -66,6 +66,11 @@ #define CONFIG_LBA48 /* SPI Flash Configs */ +#if defined(CONFIG_SPL_BUILD) +#undef CONFIG_DM_SPI +#undef CONFIG_DM_SPI_FLASH +#undef CONFIG_SPI_FLASH_MTD +#endif /* UART */ #define CONFIG_MXC_UART -- 2.39.5