From ca038fc0339c02c8a0b455b5d5f533928b284757 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 15 Feb 2023 11:41:51 -0300 Subject: [PATCH] mx53loco: Add DM_I2C support The conversion to DM_I2C is mandatory, so add support for it. Signed-off-by: Fabio Estevam --- board/freescale/mx53loco/mx53loco.c | 36 ++++++++++++++--------------- configs/mx53loco_defconfig | 2 +- 2 files changed, 19 insertions(+), 19 deletions(-) diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c index d447ad840a..d418cd8f4c 100644 --- a/board/freescale/mx53loco/mx53loco.c +++ b/board/freescale/mx53loco/mx53loco.c @@ -27,6 +27,8 @@ #include #include #include +#include +#include #define MX53LOCO_LCD_POWER IMX_GPIO_NR(3, 24) @@ -39,10 +41,16 @@ u32 get_board_rev(void) struct fuse_bank *bank = &iim->bank[0]; struct fuse_bank0_regs *fuse = (struct fuse_bank0_regs *)bank->fuse_regs; + struct udevice *bus; + struct udevice *dev; int rev = readl(&fuse->gp[6]); - if (!i2c_probe(CFG_SYS_DIALOG_PMIC_I2C_ADDR)) + ret = uclass_get_device_by_seq(UCLASS_I2C, 0, &bus); + if (ret) + return ret; + + if (!dm_i2c_probe(bus, CFG_SYS_DIALOG_PMIC_I2C_ADDR, 0, &dev)) rev = 0; return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8; @@ -62,26 +70,19 @@ static void setup_iomux_uart(void) imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); } -#define I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_ODE) - -static void setup_iomux_i2c(void) -{ - static const iomux_v3_cfg_t i2c1_pads[] = { - NEW_PAD_CTRL(MX53_PAD_CSI0_DAT8__I2C1_SDA, I2C_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_CSI0_DAT9__I2C1_SCL, I2C_PAD_CTRL), - }; - - imx_iomux_v3_setup_multiple_pads(i2c1_pads, ARRAY_SIZE(i2c1_pads)); -} - static int power_init(void) { unsigned int val; int ret; struct pmic *p; + struct udevice *bus; + struct udevice *dev; + + ret = uclass_get_device_by_seq(UCLASS_I2C, 0, &bus); + if (ret) + return ret; - if (!i2c_probe(CFG_SYS_DIALOG_PMIC_I2C_ADDR)) { + if (!dm_i2c_probe(bus, CFG_SYS_DIALOG_PMIC_I2C_ADDR, 0, &dev)) { ret = pmic_dialog_init(I2C_PMIC); if (ret) return ret; @@ -124,8 +125,8 @@ static int power_init(void) return ret; } - if (!i2c_probe(CFG_SYS_FSL_PMIC_I2C_ADDR)) { - ret = pmic_init(I2C_0); + if (!dm_i2c_probe(bus, CFG_SYS_FSL_PMIC_I2C_ADDR, 0, &dev)) { + ret = pmic_init(0); if (ret) return ret; @@ -225,7 +226,6 @@ int board_init(void) gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; mxc_set_sata_internal_clock(); - setup_iomux_i2c(); return 0; } diff --git a/configs/mx53loco_defconfig b/configs/mx53loco_defconfig index e332c930b9..f497ccf9e9 100644 --- a/configs/mx53loco_defconfig +++ b/configs/mx53loco_defconfig @@ -44,7 +44,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FEC0" CONFIG_ARP_TIMEOUT=200 -CONFIG_SYS_I2C_LEGACY=y +CONFIG_DM_I2C=y CONFIG_SYS_I2C_MXC=y CONFIG_FSL_ESDHC_IMX=y CONFIG_MTD=y -- 2.39.5