From bf88720850c5c9de2c1ee6c834a1440bf37e9e3b Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Wed, 3 Sep 2014 17:59:57 +0200 Subject: [PATCH] AM335x: igep0033: Convert to generic board and use ti_am335x_common.h. To reduce code duplication update am335x_igep0033.h to use ti_am335x_common.h and convert to generic board. Signed-off-by: Enric Balletbo i Serra --- include/configs/am335x_igep0033.h | 221 ++++++------------------------ 1 file changed, 43 insertions(+), 178 deletions(-) diff --git a/include/configs/am335x_igep0033.h b/include/configs/am335x_igep0033.h index dcded0acbe..a14310a8ed 100644 --- a/include/configs/am335x_igep0033.h +++ b/include/configs/am335x_igep0033.h @@ -14,11 +14,8 @@ #ifndef __CONFIG_IGEP0033_H #define __CONFIG_IGEP0033_H -#define CONFIG_AM33XX -#define CONFIG_OMAP -#define CONFIG_OMAP_COMMON - -#include +#define CONFIG_NAND +#include /* Mach type */ #define MACH_TYPE_IGEP0033 4521 /* Until the next sync */ @@ -29,166 +26,81 @@ #define V_SCLK (V_OSCK) #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ -#define CONFIG_SYS_MALLOC_LEN (1024 << 10) -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT "U-Boot# " -#define CONFIG_SYS_NO_FLASH - -/* Display cpuinfo */ -#define CONFIG_DISPLAY_CPUINFO - -/* Flattened Device Tree */ -#define CONFIG_OF_LIBFDT - -/* Commands to include */ -#include - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_BOOTZ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC -#define CONFIG_CMD_MMC -#define CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_NAND -#define CONFIG_CMD_NET -#define CONFIG_CMD_PING -#define CONFIG_CMD_UBI -#define CONFIG_CMD_UBIFS /* Make the verbose messages from UBI stop printing */ #define CONFIG_UBI_SILENCE_MSG #define CONFIG_UBIFS_SILENCE_MSG -#define CONFIG_BOOTDELAY 1 /* negative for no autoboot */ -#define CONFIG_ENV_VARS_UBOOT_CONFIG #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + +#ifndef CONFIG_SPL_BUILD #define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x80F80000\0" \ - "dtbaddr=0x80200000\0" \ + DEFAULT_LINUX_BOOT_ENV \ "bootdir=/boot\0" \ "bootfile=zImage\0" \ "dtbfile=am335x-base0033.dtb\0" \ "console=ttyO0,115200n8\0" \ - "mtdids=" MTDIDS_DEFAULT "\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ "mmcdev=0\0" \ "mmcroot=/dev/mmcblk0p2 rw\0" \ - "ubiroot=ubi0:filesystem rw ubi.mtd=3,2048\0" \ "mmcrootfstype=ext4 rootwait\0" \ - "ubirootfstype=ubifs rootwait\0" \ "mmcargs=setenv bootargs console=${console} " \ + "${optargs} " \ "root=${mmcroot} " \ "rootfstype=${mmcrootfstype}\0" \ - "ubiargs=setenv bootargs console=${console} " \ - "root=${ubiroot} " \ - "rootfstype=${ubirootfstype}\0" \ - "bootenv=uEnv.txt\0" \ + "bootenv=uEnv.txt\0" \ "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ "importbootenv=echo Importing environment from mmc ...; " \ "env import -t ${loadaddr} ${filesize}\0" \ "mmcload=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}; " \ - "load mmc ${mmcdev}:2 ${dtbaddr} ${bootdir}/${dtbfile}\0" \ - "ubiload=ubi part filesystem 2048; ubifsmount ubi0; " \ + "load mmc ${mmcdev}:2 ${fdtaddr} ${bootdir}/${dtbfile}\0" \ + "mmcboot=mmc dev ${mmcdev}; " \ + "if mmc rescan; then " \ + "echo SD/MMC found on device ${mmcdev};" \ + "if run loadbootenv; then " \ + "echo Loaded environment from ${bootenv};" \ + "run importbootenv;" \ + "fi;" \ + "if test -n $uenvcmd; then " \ + "echo Running uenvcmd ...;" \ + "run uenvcmd;" \ + "fi;" \ + "if run mmcload; then " \ + "run mmcargs; " \ + "bootz ${loadaddr} - ${fdtaddr};" \ + "fi;" \ + "fi;\0" \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "nandroot=ubi0:filesystem rw ubi.mtd=3,2048\0" \ + "nandrootfstype=ubifs rootwait\0" \ + "nandload=ubi part filesystem 2048; ubifsmount ubi0; " \ "ubifsload ${loadaddr} ${bootdir}/${bootfile}; " \ - "ubifsload ${dtbaddr} ${bootdir}/${dtbfile} \0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "bootz ${loadaddr} - ${dtbaddr}\0" \ - "ubiboot=echo Booting from nand (ubifs) ...; " \ - "run ubiargs; run ubiload; " \ - "bootz ${loadaddr} - ${dtbaddr}\0" \ + "ubifsload ${fdtaddr} ${bootdir}/${dtbfile} \0" \ + "nandargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype} \0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "run nandload; " \ + "bootz ${loadaddr} - ${fdtaddr} \0" +#endif #define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "echo SD/MMC found on device ${mmcdev};" \ - "if run loadbootenv; then " \ - "echo Loaded environment from ${bootenv};" \ - "run importbootenv;" \ - "fi;" \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "if run mmcload; then " \ - "run mmcboot;" \ - "fi;" \ - "else " \ - "run ubiboot;" \ - "fi;" \ - -/* Max number of command args */ -#define CONFIG_SYS_MAXARGS 16 - -/* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 512 - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - + sizeof(CONFIG_SYS_PROMPT) + 16) - -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ - -/* Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ -#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ - -#define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ - GENERATED_GBL_DATA_SIZE) -/* Platform/Board specific defs */ -#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ + "run mmcboot;" \ + "run nandboot;" /* NS16550 Configuration */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK (48000000) #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */ - #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -/* CPU */ -#define CONFIG_ARCH_CPU_INIT - -#define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_SYS_CONSOLE_INFO_QUIET - -/* MMC support */ -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_OMAP_HSMMC -#define CONFIG_DOS_PARTITION - -/* GPIO support */ -#define CONFIG_OMAP_GPIO - /* Ethernet support */ -#define CONFIG_DRIVER_TI_CPSW -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_NET_RETRY_COUNT 10 -#define CONFIG_NET_MULTI #define CONFIG_PHYLIB #define CONFIG_PHY_SMSC /* NAND support */ -#define CONFIG_NAND -#define CONFIG_NAND_OMAP_GPMC #define CONFIG_NAND_OMAP_ELM -#define CONFIG_SYS_NAND_BASE (0x08000000) /* phys address CS0 */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_ONFI_DETECTION 1 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ #define CONFIG_SYS_REDUNDAND_ENVIRONMENT @@ -210,40 +122,11 @@ /* Unsupported features */ #undef CONFIG_USE_IRQ -/* Defines for SPL */ -#define CONFIG_SPL_FRAMEWORK -/* - * Place the image at the start of the ROM defined image space. - * We limit our size to the ROM-defined downloaded image area, and use the - * rest of the space for stack. - */ -#define CONFIG_SPL_TEXT_BASE 0x402F0400 -#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE) -#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR - -#define CONFIG_SPL_BSS_START_ADDR 0x80000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ - -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 -#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT +/* SPL */ +#undef CONFIG_SPL_OS_BOOT /* Not supported by existing map */ #define CONFIG_SPL_YMODEM_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" -#define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_NAND_AM33XX_BCH -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_NAND_BASE -#define CONFIG_SPL_NAND_DRIVERS -#define CONFIG_SPL_NAND_ECC #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ CONFIG_SYS_NAND_PAGE_SIZE) @@ -267,22 +150,4 @@ #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 -/* - * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM - * 64 bytes before this address should be set aside for u-boot.img's - * header. That is 0x800FFFC0--0x80100000 should not be used for any - * other needs. - */ -#define CONFIG_SYS_TEXT_BASE 0x80800000 -#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 - -/* - * Since SPL did pll and ddr initialization for us, - * we don't need to do it twice. - */ -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SKIP_LOWLEVEL_INIT -#endif - #endif /* ! __CONFIG_IGEP0033_H */ -- 2.39.5