From bc35b49a5c12891d969e28dbf29024ca664dea8b Mon Sep 17 00:00:00 2001 From: Yu Chien Peter Lin Date: Tue, 4 Jul 2023 19:13:20 +0800 Subject: [PATCH] riscv: andes_plicsw: Fix IPI during OpenSBI invocation On some AE350 boards, we need to explicitly initialize the priority registers to a non-zero value so the boot hart can instruct secondary harts to jump to OpenSBI. This patch also updates the information about PLICSW. Signed-off-by: Yu Chien Peter Lin Reviewed-by: Leo Yu-Chi Liang --- arch/riscv/lib/andes_plicsw.c | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-) diff --git a/arch/riscv/lib/andes_plicsw.c b/arch/riscv/lib/andes_plicsw.c index 324eb445aa..7518408089 100644 --- a/arch/riscv/lib/andes_plicsw.c +++ b/arch/riscv/lib/andes_plicsw.c @@ -2,9 +2,10 @@ /* * Copyright (C) 2019, Rick Chen * - * U-Boot syscon driver for Andes's Platform Level Interrupt Controller (PLIC). - * The PLIC block holds memory-mapped claim and pending registers - * associated with software interrupt. + * U-Boot syscon driver for Andes' PLICSW + * The PLICSW block is an Andes-specific design for software interrupts, + * contains memory-mapped priority, enable, claim and pending registers + * similar to RISC-V PLIC. */ #include @@ -26,9 +27,13 @@ #define ENABLE_REG(base, hart) ((ulong)(base) + 0x2000 + (hart) * 0x80) /* claim register */ #define CLAIM_REG(base, hart) ((ulong)(base) + 0x200004 + (hart) * 0x1000) +/* priority register */ +#define PRIORITY_REG(base) ((ulong)(base) + PLICSW_PRIORITY_BASE) #define ENABLE_HART_IPI (0x01010101) #define SEND_IPI_TO_HART(hart) (0x1 << (hart)) +#define PLICSW_PRIORITY_BASE 0x4 +#define PLICSW_INTERRUPT_PER_HART 0x8 DECLARE_GLOBAL_DATA_PTR; @@ -43,9 +48,21 @@ static int enable_ipi(int hart) return 0; } +static void init_priority_ipi(int hart_num) +{ + uint32_t *priority = (void *)PRIORITY_REG(gd->arch.plicsw); + + for (int i = 0; i < hart_num * PLICSW_INTERRUPT_PER_HART; i++) { + writel(1, &priority[i]); + } + + return; +} + int riscv_init_ipi(void) { int ret; + int hart_num = 0; long *base = syscon_get_first_range(RISCV_SYSCON_PLICSW); ofnode node; struct udevice *dev; @@ -79,8 +96,10 @@ int riscv_init_ipi(void) ret = ofnode_read_u32(node, "reg", ®); if (ret == 0) enable_ipi(reg); + hart_num++; } + init_priority_ipi(hart_num); return 0; } -- 2.39.5