From b861574bd9e7c480ceec47b77a59ed5a52b57937 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sun, 4 Dec 2022 10:13:31 -0500 Subject: [PATCH] global: Migrate CONFIG_PL01x_PORTS to CFG Perform a simple rename of CONFIG_PL01x_PORTS to CFG_PL01x_PORTS Signed-off-by: Tom Rini --- README | 2 +- drivers/serial/serial_pl01x.c | 2 +- include/configs/lx2160a_common.h | 2 +- include/configs/mxs.h | 2 +- include/configs/s5p4418_nanopi2.h | 2 +- include/configs/synquacer.h | 2 +- include/configs/vexpress_common.h | 2 +- 7 files changed, 7 insertions(+), 7 deletions(-) diff --git a/README b/README index 8354cf5699..12672d2bfb 100644 --- a/README +++ b/README @@ -418,7 +418,7 @@ The following options need to be configured: If you have Amba PrimeCell PL011 UARTs, set this variable to the clock speed of the UARTs. - CONFIG_PL01x_PORTS + CFG_PL01x_PORTS If you have Amba PrimeCell PL010 or PL011 UARTs on your board, define this to a list of base addresses for each (supported) diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c index dd2881931d..7449e9b904 100644 --- a/drivers/serial/serial_pl01x.c +++ b/drivers/serial/serial_pl01x.c @@ -29,7 +29,7 @@ DECLARE_GLOBAL_DATA_PTR; #ifndef CONFIG_DM_SERIAL -static volatile unsigned char *const port[] = CONFIG_PL01x_PORTS; +static volatile unsigned char *const port[] = CFG_PL01x_PORTS; static enum pl01x_type pl01x_type __section(".data"); static struct pl01x_regs *base_regs __section(".data"); #define NUM_PORTS (sizeof(port)/sizeof(port[0])) diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h index f8a20ea16f..6f46ca78d4 100644 --- a/include/configs/lx2160a_common.h +++ b/include/configs/lx2160a_common.h @@ -45,7 +45,7 @@ #define CFG_SYS_SERIAL2 0x21e0000 #define CFG_SYS_SERIAL3 0x21f0000 /*below might needs to be removed*/ -#define CONFIG_PL01x_PORTS {(void *)CFG_SYS_SERIAL0, \ +#define CFG_PL01x_PORTS {(void *)CFG_SYS_SERIAL0, \ (void *)CFG_SYS_SERIAL1, \ (void *)CFG_SYS_SERIAL2, \ (void *)CFG_SYS_SERIAL3 } diff --git a/include/configs/mxs.h b/include/configs/mxs.h index 90cb1a5e4a..6ebfee6927 100644 --- a/include/configs/mxs.h +++ b/include/configs/mxs.h @@ -78,7 +78,7 @@ * Conflicts with AUART driver which can be set by board. */ #define CFG_PL011_CLOCK 24000000 -#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE } +#define CFG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE } /* Default baudrate can be overridden by board! */ /* NAND */ diff --git a/include/configs/s5p4418_nanopi2.h b/include/configs/s5p4418_nanopi2.h index 0e7d01925e..2fa44e65fc 100644 --- a/include/configs/s5p4418_nanopi2.h +++ b/include/configs/s5p4418_nanopi2.h @@ -77,7 +77,7 @@ * serial console configuration */ #define CFG_PL011_CLOCK 50000000 -#define CONFIG_PL01x_PORTS {(void *)PHY_BASEADDR_UART0, \ +#define CFG_PL01x_PORTS {(void *)PHY_BASEADDR_UART0, \ (void *)PHY_BASEADDR_UART1, \ (void *)PHY_BASEADDR_UART2, \ (void *)PHY_BASEADDR_UART3} diff --git a/include/configs/synquacer.h b/include/configs/synquacer.h index 350cc69c28..8f44c6f66a 100644 --- a/include/configs/synquacer.h +++ b/include/configs/synquacer.h @@ -32,7 +32,7 @@ /* Serial (pl011) */ #define UART_CLK (62500000) #define CFG_PL011_CLOCK UART_CLK -#define CONFIG_PL01x_PORTS {(void *)(0x2a400000)} +#define CFG_PL01x_PORTS {(void *)(0x2a400000)} /* Support MTD */ #define CFG_SYS_FLASH_BASE (0x08000000) diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h index 3fc70de577..ba7731bfca 100644 --- a/include/configs/vexpress_common.h +++ b/include/configs/vexpress_common.h @@ -117,7 +117,7 @@ /* PL011 Serial Configuration */ #define CFG_PL011_CLOCK 24000000 -#define CONFIG_PL01x_PORTS {(void *)CFG_SYS_SERIAL0, \ +#define CFG_PL01x_PORTS {(void *)CFG_SYS_SERIAL0, \ (void *)CFG_SYS_SERIAL1} #define CFG_SYS_SERIAL0 V2M_UART0 -- 2.39.5