From b71f74eab42782199757e146483126aee5e3c271 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Tue, 6 Jun 2023 22:39:12 +0530 Subject: [PATCH] arm64: dts: rockchip: Drop unused rk3328-xhci node rk3328-xhci has been added due to the fact that the upstream dwc3 is unsupported. Moreover, the driver for rk3328-xhci is not added to the code tree. By considering these facts and unsupported rk3328-xhci this patch is dropping all related code from DT. However, the DWC3 is fixed now in dwc3-generic and RK3328 USB 3.0 is functional in upcoming patches. Let's drop it. Signed-off-by: Jagan Teki Reviewed-by: Kever Yang --- arch/arm/dts/rk3328-evb-u-boot.dtsi | 5 ----- arch/arm/dts/rk3328-roc-cc-u-boot.dtsi | 14 -------------- arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi | 5 ----- arch/arm/dts/rk3328-rock64-u-boot.dtsi | 15 --------------- arch/arm/dts/rk3328-u-boot.dtsi | 11 ----------- 5 files changed, 50 deletions(-) diff --git a/arch/arm/dts/rk3328-evb-u-boot.dtsi b/arch/arm/dts/rk3328-evb-u-boot.dtsi index 95e497970e..12b68df1ac 100644 --- a/arch/arm/dts/rk3328-evb-u-boot.dtsi +++ b/arch/arm/dts/rk3328-evb-u-boot.dtsi @@ -44,8 +44,3 @@ /* Integrated PHY unsupported by U-Boot */ status = "broken"; }; - -&usb_host0_xhci { - vbus-supply = <&vcc5v0_host_xhci>; - status = "okay"; -}; diff --git a/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi b/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi index 27a454f017..2062f34bf8 100644 --- a/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi +++ b/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi @@ -48,20 +48,6 @@ bootph-pre-ram; }; -&usb_host0_xhci { - vbus-supply = <&vcc_host1_5v>; - status = "okay"; -}; - -/* - * This makes XHCI responsible for toggling VBUS. This is needed to work - * around an issue where either XHCI only works with USB 2.0 or OTG doesn't - * work, depending on how VBUS is configured. Having USB 3.0 seems better. - */ -&vcc_host1_5v { - /delete-property/ regulator-always-on; -}; - /* Need this and all the pinctrl/gpio stuff above to set pinmux */ &vcc_sd { bootph-pre-ram; diff --git a/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi b/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi index 088e21c76a..1f220c6dcd 100644 --- a/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi +++ b/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi @@ -45,11 +45,6 @@ bootph-pre-ram; }; -&usb_host0_xhci { - vbus-supply = <&vcc_host_5v>; - status = "okay"; -}; - /* Need this and all the pinctrl/gpio stuff above to set pinmux */ &vcc_sd { bootph-pre-ram; diff --git a/arch/arm/dts/rk3328-rock64-u-boot.dtsi b/arch/arm/dts/rk3328-rock64-u-boot.dtsi index c20a99a620..849854302e 100644 --- a/arch/arm/dts/rk3328-rock64-u-boot.dtsi +++ b/arch/arm/dts/rk3328-rock64-u-boot.dtsi @@ -48,21 +48,6 @@ bootph-pre-ram; }; -&usb_host0_xhci { - vbus-supply = <&vcc_host_5v>; - status = "okay"; -}; - -/* - * This makes XHCI responsible for toggling VBUS. This is needed to work - * around an issue where either XHCI only works with USB 2.0 or OTG doesn't - * work, depending on how VBUS is configured. Having USB 3.0 seems better. - */ -&vcc_host_5v { - /delete-property/ regulator-always-on; - /delete-property/ regulator-boot-on; -}; - /* Need this and all the pinctrl/gpio stuff above to set pinmux */ &vcc_sd { bootph-pre-ram; diff --git a/arch/arm/dts/rk3328-u-boot.dtsi b/arch/arm/dts/rk3328-u-boot.dtsi index 668f8ca29d..ce96ce40a7 100644 --- a/arch/arm/dts/rk3328-u-boot.dtsi +++ b/arch/arm/dts/rk3328-u-boot.dtsi @@ -26,17 +26,6 @@ 0x0 0xff720000 0x0 0x1000 0x0 0xff798000 0x0 0x1000>; }; - - usb_host0_xhci: usb@ff600000 { - compatible = "rockchip,rk3328-xhci"; - reg = <0x0 0xff600000 0x0 0x100000>; - interrupts = ; - snps,dis-enblslpm-quirk; - snps,phyif-utmi-bits = <16>; - snps,dis-u2-freeclk-exists-quirk; - snps,dis-u2-susphy-quirk; - status = "disabled"; - }; }; &cru { -- 2.39.5