From aa26948b5874f72170d9b319a2dd92cdcbdc0a05 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Thu, 16 Dec 2021 20:59:14 -0700 Subject: [PATCH] arm: vexpress: Add a devicetree files for juno Sync these file, obtained from Linux v5.15. Add a note for the maintainer, and SPDX lines where they are missing. The added lines are: SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause Note, this matches the text in those files, but is not the same as the GPL-2.0 of some files. [1] https://releases.linaro.org/android/reference-lcr/juno/7.1-17.05/ Signed-off-by: Simon Glass Acked-by: Linus Walleij --- arch/arm/dts/Makefile | 3 + arch/arm/dts/juno-base.dtsi | 831 +++++++++++++++++++++++++ arch/arm/dts/juno-clocks.dtsi | 46 ++ arch/arm/dts/juno-cs-r1r2.dtsi | 85 +++ arch/arm/dts/juno-motherboard.dtsi | 303 +++++++++ arch/arm/dts/juno-r2-u-boot.dtsi | 20 + arch/arm/dts/juno-r2.dts | 322 ++++++++++ configs/vexpress_aemv8a_juno_defconfig | 1 + 8 files changed, 1611 insertions(+) create mode 100644 arch/arm/dts/juno-base.dtsi create mode 100644 arch/arm/dts/juno-clocks.dtsi create mode 100644 arch/arm/dts/juno-cs-r1r2.dtsi create mode 100644 arch/arm/dts/juno-motherboard.dtsi create mode 100644 arch/arm/dts/juno-r2-u-boot.dtsi create mode 100644 arch/arm/dts/juno-r2.dts diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 9cddab3720..d53bae2c35 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1149,7 +1149,10 @@ dtb-$(CONFIG_TARGET_GE_BX50V3) += \ dtb-$(CONFIG_TARGET_GE_B1X5V2) += imx6dl-b1x5v2.dtb dtb-$(CONFIG_TARGET_MX53PPD) += imx53-ppd.dtb +# TODO(Linus Walleij ): Should us a single vexpress +# Kconfig option to build all of these. See examples above. dtb-$(CONFIG_TARGET_VEXPRESS_CA9X4) += vexpress-v2p-ca9.dtb +dtb-$(CONFIG_TARGET_VEXPRESS64_JUNO) += juno-r2.dtb dtb-$(CONFIG_TARGET_TOTAL_COMPUTE) += total_compute.dtb diff --git a/arch/arm/dts/juno-base.dtsi b/arch/arm/dts/juno-base.dtsi new file mode 100644 index 0000000000..6288e104a0 --- /dev/null +++ b/arch/arm/dts/juno-base.dtsi @@ -0,0 +1,831 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "juno-clocks.dtsi" +#include "juno-motherboard.dtsi" + +/ { + /* + * Devices shared by all Juno boards + */ + + memtimer: timer@2a810000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x2a810000 0x0 0x10000>; + clock-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x2a820000 0x20000>; + status = "disabled"; + frame@2a830000 { + frame-number = <1>; + interrupts = ; + reg = <0x10000 0x10000>; + }; + }; + + mailbox: mhu@2b1f0000 { + compatible = "arm,mhu", "arm,primecell"; + reg = <0x0 0x2b1f0000 0x0 0x1000>; + interrupts = , + ; + #mbox-cells = <1>; + clocks = <&soc_refclk100mhz>; + clock-names = "apb_pclk"; + }; + + smmu_gpu: iommu@2b400000 { + compatible = "arm,mmu-400", "arm,smmu-v1"; + reg = <0x0 0x2b400000 0x0 0x10000>; + interrupts = , + ; + #iommu-cells = <1>; + #global-interrupts = <1>; + power-domains = <&scpi_devpd 1>; + dma-coherent; + status = "disabled"; + }; + + smmu_pcie: iommu@2b500000 { + compatible = "arm,mmu-401", "arm,smmu-v1"; + reg = <0x0 0x2b500000 0x0 0x10000>; + interrupts = , + ; + #iommu-cells = <1>; + #global-interrupts = <1>; + dma-coherent; + status = "disabled"; + }; + + smmu_etr: iommu@2b600000 { + compatible = "arm,mmu-401", "arm,smmu-v1"; + reg = <0x0 0x2b600000 0x0 0x10000>; + interrupts = , + ; + #iommu-cells = <1>; + #global-interrupts = <1>; + dma-coherent; + power-domains = <&scpi_devpd 0>; + }; + + gic: interrupt-controller@2c010000 { + compatible = "arm,gic-400", "arm,cortex-a15-gic"; + reg = <0x0 0x2c010000 0 0x1000>, + <0x0 0x2c02f000 0 0x2000>, + <0x0 0x2c04f000 0 0x2000>, + <0x0 0x2c06f000 0 0x2000>; + #address-cells = <1>; + #interrupt-cells = <3>; + #size-cells = <1>; + interrupt-controller; + interrupts = ; + ranges = <0 0 0x2c1c0000 0x40000>; + + v2m_0: v2m@0 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0 0x10000>; + }; + + v2m@10000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x10000 0x10000>; + }; + + v2m@20000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x20000 0x10000>; + }; + + v2m@30000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x30000 0x10000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + /* + * Juno TRMs specify the size for these coresight components as 64K. + * The actual size is just 4K though 64K is reserved. Access to the + * unmapped reserved region results in a DECERR response. + */ + etf@20010000 { /* etf0 */ + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x20010000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + in-ports { + port { + etf0_in_port: endpoint { + remote-endpoint = <&main_funnel_out_port>; + }; + }; + }; + + out-ports { + port { + etf0_out_port: endpoint { + }; + }; + }; + }; + + tpiu@20030000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0 0x20030000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + in-ports { + port { + tpiu_in_port: endpoint { + remote-endpoint = <&replicator_out_port0>; + }; + }; + }; + }; + + /* main funnel on Juno r0, cssys0 funnel on Juno r1/r2 as per TRM*/ + main_funnel: funnel@20040000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x20040000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + out-ports { + port { + main_funnel_out_port: endpoint { + remote-endpoint = <&etf0_in_port>; + }; + }; + }; + + main_funnel_in_ports: in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + main_funnel_in_port0: endpoint { + remote-endpoint = <&cluster0_funnel_out_port>; + }; + }; + + port@1 { + reg = <1>; + main_funnel_in_port1: endpoint { + remote-endpoint = <&cluster1_funnel_out_port>; + }; + }; + }; + }; + + etr@20070000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x20070000 0 0x1000>; + iommus = <&smmu_etr 0>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + arm,scatter-gather; + in-ports { + port { + etr_in_port: endpoint { + remote-endpoint = <&replicator_out_port1>; + }; + }; + }; + }; + + stm@20100000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0 0x20100000 0 0x1000>, + <0 0x28000000 0 0x1000000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + out-ports { + port { + stm_out_port: endpoint { + }; + }; + }; + }; + + replicator@20120000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x20120000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* replicator output ports */ + port@0 { + reg = <0>; + replicator_out_port0: endpoint { + remote-endpoint = <&tpiu_in_port>; + }; + }; + + port@1 { + reg = <1>; + replicator_out_port1: endpoint { + remote-endpoint = <&etr_in_port>; + }; + }; + }; + in-ports { + port { + replicator_in_port0: endpoint { + }; + }; + }; + }; + + cpu_debug0: cpu-debug@22010000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x0 0x22010000 0x0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + }; + + etm0: etm@22040000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x22040000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + out-ports { + port { + cluster0_etm0_out_port: endpoint { + remote-endpoint = <&cluster0_funnel_in_port0>; + }; + }; + }; + }; + + funnel@220c0000 { /* cluster0 funnel */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x220c0000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + out-ports { + port { + cluster0_funnel_out_port: endpoint { + remote-endpoint = <&main_funnel_in_port0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + cluster0_funnel_in_port0: endpoint { + remote-endpoint = <&cluster0_etm0_out_port>; + }; + }; + + port@1 { + reg = <1>; + cluster0_funnel_in_port1: endpoint { + remote-endpoint = <&cluster0_etm1_out_port>; + }; + }; + }; + }; + + cpu_debug1: cpu-debug@22110000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x0 0x22110000 0x0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + }; + + etm1: etm@22140000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x22140000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + out-ports { + port { + cluster0_etm1_out_port: endpoint { + remote-endpoint = <&cluster0_funnel_in_port1>; + }; + }; + }; + }; + + cpu_debug2: cpu-debug@23010000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x0 0x23010000 0x0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + }; + + etm2: etm@23040000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x23040000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + out-ports { + port { + cluster1_etm0_out_port: endpoint { + remote-endpoint = <&cluster1_funnel_in_port0>; + }; + }; + }; + }; + + funnel@230c0000 { /* cluster1 funnel */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x230c0000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + out-ports { + port { + cluster1_funnel_out_port: endpoint { + remote-endpoint = <&main_funnel_in_port1>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + cluster1_funnel_in_port0: endpoint { + remote-endpoint = <&cluster1_etm0_out_port>; + }; + }; + + port@1 { + reg = <1>; + cluster1_funnel_in_port1: endpoint { + remote-endpoint = <&cluster1_etm1_out_port>; + }; + }; + port@2 { + reg = <2>; + cluster1_funnel_in_port2: endpoint { + remote-endpoint = <&cluster1_etm2_out_port>; + }; + }; + port@3 { + reg = <3>; + cluster1_funnel_in_port3: endpoint { + remote-endpoint = <&cluster1_etm3_out_port>; + }; + }; + }; + }; + + cpu_debug3: cpu-debug@23110000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x0 0x23110000 0x0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + }; + + etm3: etm@23140000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x23140000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + out-ports { + port { + cluster1_etm1_out_port: endpoint { + remote-endpoint = <&cluster1_funnel_in_port1>; + }; + }; + }; + }; + + cpu_debug4: cpu-debug@23210000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x0 0x23210000 0x0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + }; + + etm4: etm@23240000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x23240000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + out-ports { + port { + cluster1_etm2_out_port: endpoint { + remote-endpoint = <&cluster1_funnel_in_port2>; + }; + }; + }; + }; + + cpu_debug5: cpu-debug@23310000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x0 0x23310000 0x0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + }; + + etm5: etm@23340000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x23340000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + out-ports { + port { + cluster1_etm3_out_port: endpoint { + remote-endpoint = <&cluster1_funnel_in_port3>; + }; + }; + }; + }; + + gpu: gpu@2d000000 { + compatible = "arm,juno-mali", "arm,mali-t624"; + reg = <0 0x2d000000 0 0x10000>; + interrupts = , + , + ; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&scpi_dvfs 2>; + power-domains = <&scpi_devpd 1>; + dma-coherent; + /* The SMMU is only really of interest to bare-metal hypervisors */ + /* iommus = <&smmu_gpu 0>; */ + status = "disabled"; + }; + + sram: sram@2e000000 { + compatible = "arm,juno-sram-ns", "mmio-sram"; + reg = <0x0 0x2e000000 0x0 0x8000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x2e000000 0x8000>; + + cpu_scp_lpri: scp-sram@0 { + compatible = "arm,juno-scp-shmem"; + reg = <0x0 0x200>; + }; + + cpu_scp_hpri: scp-sram@200 { + compatible = "arm,juno-scp-shmem"; + reg = <0x200 0x200>; + }; + }; + + pcie_ctlr: pcie@40000000 { + compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic"; + device_type = "pci"; + reg = <0 0x40000000 0 0x10000000>; /* ECAM config space */ + bus-range = <0 255>; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + dma-coherent; + ranges = <0x01000000 0x00 0x00000000 0x00 0x5f800000 0x0 0x00800000>, + <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>, + <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>; + /* Standard AXI Translation entries as programmed by EDK2 */ + dma-ranges = <0x02000000 0x0 0x2c1c0000 0x0 0x2c1c0000 0x0 0x00040000>, + <0x02000000 0x0 0x80000000 0x0 0x80000000 0x0 0x80000000>, + <0x43000000 0x8 0x00000000 0x8 0x00000000 0x2 0x00000000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &gic 0 GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic 0 GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic 0 GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic 0 GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + msi-parent = <&v2m_0>; + status = "disabled"; + iommu-map-mask = <0x0>; /* RC has no means to output PCI RID */ + iommu-map = <0x0 &smmu_pcie 0x0 0x1>; + }; + + scpi { + compatible = "arm,scpi"; + mboxes = <&mailbox 1>; + shmem = <&cpu_scp_hpri>; + + clocks { + compatible = "arm,scpi-clocks"; + + scpi_dvfs: clocks-0 { + compatible = "arm,scpi-dvfs-clocks"; + #clock-cells = <1>; + clock-indices = <0>, <1>, <2>; + clock-output-names = "atlclk", "aplclk","gpuclk"; + }; + scpi_clk: clocks-1 { + compatible = "arm,scpi-variable-clocks"; + #clock-cells = <1>; + clock-indices = <3>; + clock-output-names = "pxlclk"; + }; + }; + + scpi_devpd: power-controller { + compatible = "arm,scpi-power-domains"; + num-domains = <2>; + #power-domain-cells = <1>; + }; + + scpi_sensors0: sensors { + compatible = "arm,scpi-sensors"; + #thermal-sensor-cells = <1>; + }; + }; + + thermal-zones { + pmic { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&scpi_sensors0 0>; + }; + + soc { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&scpi_sensors0 3>; + }; + + big_cluster_thermal_zone: big-cluster { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&scpi_sensors0 21>; + status = "disabled"; + }; + + little_cluster_thermal_zone: little-cluster { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&scpi_sensors0 22>; + status = "disabled"; + }; + + gpu0_thermal_zone: gpu0 { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&scpi_sensors0 23>; + status = "disabled"; + }; + + gpu1_thermal_zone: gpu1 { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&scpi_sensors0 24>; + status = "disabled"; + }; + }; + + smmu_dma: iommu@7fb00000 { + compatible = "arm,mmu-401", "arm,smmu-v1"; + reg = <0x0 0x7fb00000 0x0 0x10000>; + interrupts = , + ; + #iommu-cells = <1>; + #global-interrupts = <1>; + dma-coherent; + }; + + smmu_hdlcd1: iommu@7fb10000 { + compatible = "arm,mmu-401", "arm,smmu-v1"; + reg = <0x0 0x7fb10000 0x0 0x10000>; + interrupts = , + ; + #iommu-cells = <1>; + #global-interrupts = <1>; + }; + + smmu_hdlcd0: iommu@7fb20000 { + compatible = "arm,mmu-401", "arm,smmu-v1"; + reg = <0x0 0x7fb20000 0x0 0x10000>; + interrupts = , + ; + #iommu-cells = <1>; + #global-interrupts = <1>; + }; + + smmu_usb: iommu@7fb30000 { + compatible = "arm,mmu-401", "arm,smmu-v1"; + reg = <0x0 0x7fb30000 0x0 0x10000>; + interrupts = , + ; + #iommu-cells = <1>; + #global-interrupts = <1>; + dma-coherent; + }; + + dma@7ff00000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0x7ff00000 0 0x1000>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + interrupts = , + , + , + , + , + , + , + , + ; + iommus = <&smmu_dma 0>, + <&smmu_dma 1>, + <&smmu_dma 2>, + <&smmu_dma 3>, + <&smmu_dma 4>, + <&smmu_dma 5>, + <&smmu_dma 6>, + <&smmu_dma 7>, + <&smmu_dma 8>; + clocks = <&soc_faxiclk>; + clock-names = "apb_pclk"; + }; + + hdlcd@7ff50000 { + compatible = "arm,hdlcd"; + reg = <0 0x7ff50000 0 0x1000>; + interrupts = ; + iommus = <&smmu_hdlcd1 0>; + clocks = <&scpi_clk 3>; + clock-names = "pxlclk"; + + port { + hdlcd1_output: endpoint { + remote-endpoint = <&tda998x_1_input>; + }; + }; + }; + + hdlcd@7ff60000 { + compatible = "arm,hdlcd"; + reg = <0 0x7ff60000 0 0x1000>; + interrupts = ; + iommus = <&smmu_hdlcd0 0>; + clocks = <&scpi_clk 3>; + clock-names = "pxlclk"; + + port { + hdlcd0_output: endpoint { + remote-endpoint = <&tda998x_0_input>; + }; + }; + }; + + soc_uart0: serial@7ff80000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0x7ff80000 0x0 0x1000>; + interrupts = ; + clocks = <&soc_uartclk>, <&soc_refclk100mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + i2c@7ffa0000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x7ffa0000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clock-frequency = <400000>; + i2c-sda-hold-time-ns = <500>; + clocks = <&soc_smc50mhz>; + + hdmi-transmitter@70 { + compatible = "nxp,tda998x"; + reg = <0x70>; + port { + tda998x_0_input: endpoint { + remote-endpoint = <&hdlcd0_output>; + }; + }; + }; + + hdmi-transmitter@71 { + compatible = "nxp,tda998x"; + reg = <0x71>; + port { + tda998x_1_input: endpoint { + remote-endpoint = <&hdlcd1_output>; + }; + }; + }; + }; + + usb@7ffb0000 { + compatible = "generic-ohci"; + reg = <0x0 0x7ffb0000 0x0 0x10000>; + interrupts = ; + iommus = <&smmu_usb 0>; + clocks = <&soc_usb48mhz>; + }; + + usb@7ffc0000 { + compatible = "generic-ehci"; + reg = <0x0 0x7ffc0000 0x0 0x10000>; + interrupts = ; + iommus = <&smmu_usb 0>; + clocks = <&soc_usb48mhz>; + }; + + memory-controller@7ffd0000 { + compatible = "arm,pl354", "arm,primecell"; + reg = <0 0x7ffd0000 0 0x1000>; + interrupts = , + ; + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + }; + + memory@80000000 { + device_type = "memory"; + /* last 16MB of the first memory area is reserved for secure world use by firmware */ + reg = <0x00000000 0x80000000 0x0 0x7f000000>, + <0x00000008 0x80000000 0x1 0x80000000>; + }; + + bus@8000000 { + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 15>; + interrupt-map = <0 0 0 &gic 0 GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <0 0 1 &gic 0 GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <0 0 2 &gic 0 GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <0 0 3 &gic 0 GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <0 0 4 &gic 0 GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <0 0 5 &gic 0 GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <0 0 6 &gic 0 GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <0 0 7 &gic 0 GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <0 0 8 &gic 0 GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <0 0 9 &gic 0 GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, + <0 0 10 &gic 0 GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <0 0 11 &gic 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <0 0 12 &gic 0 GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + }; + + site2: tlx-bus@60000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x60000000 0x10000000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0>; + interrupt-map = <0 0 &gic 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + }; +}; diff --git a/arch/arm/dts/juno-clocks.dtsi b/arch/arm/dts/juno-clocks.dtsi new file mode 100644 index 0000000000..b0f8ccaac9 --- /dev/null +++ b/arch/arm/dts/juno-clocks.dtsi @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause +/* + * ARM Juno Platform clocks + * + * Copyright (c) 2013-2014 ARM Ltd + * + * This file is licensed under a dual GPLv2 or BSD license. + * + */ +/ { + /* SoC fixed clocks */ + soc_uartclk: refclk7372800hz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <7372800>; + clock-output-names = "juno:uartclk"; + }; + + soc_usb48mhz: clk48mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + clock-output-names = "clk48mhz"; + }; + + soc_smc50mhz: clk50mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + clock-output-names = "smc_clk"; + }; + + soc_refclk100mhz: refclk100mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "apb_pclk"; + }; + + soc_faxiclk: refclk400mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + clock-output-names = "faxi_clk"; + }; +}; diff --git a/arch/arm/dts/juno-cs-r1r2.dtsi b/arch/arm/dts/juno-cs-r1r2.dtsi new file mode 100644 index 0000000000..eda3d9e18a --- /dev/null +++ b/arch/arm/dts/juno-cs-r1r2.dtsi @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: GPL-2.0 +/ { + funnel@20130000 { /* cssys1 */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x20130000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + out-ports { + port { + csys1_funnel_out_port: endpoint { + remote-endpoint = <&etf1_in_port>; + }; + }; + }; + in-ports { + port { + csys1_funnel_in_port0: endpoint { + }; + }; + + }; + }; + + etf@20140000 { /* etf1 */ + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x20140000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + in-ports { + port { + etf1_in_port: endpoint { + remote-endpoint = <&csys1_funnel_out_port>; + }; + }; + }; + out-ports { + port { + etf1_out_port: endpoint { + remote-endpoint = <&csys2_funnel_in_port1>; + }; + }; + }; + }; + + funnel@20150000 { /* cssys2 */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x20150000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + out-ports { + port { + csys2_funnel_out_port: endpoint { + remote-endpoint = <&replicator_in_port0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + csys2_funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = <&etf0_out_port>; + }; + }; + + port@1 { + reg = <1>; + csys2_funnel_in_port1: endpoint { + slave-mode; + remote-endpoint = <&etf1_out_port>; + }; + }; + + }; + }; +}; diff --git a/arch/arm/dts/juno-motherboard.dtsi b/arch/arm/dts/juno-motherboard.dtsi new file mode 100644 index 0000000000..42b17542ab --- /dev/null +++ b/arch/arm/dts/juno-motherboard.dtsi @@ -0,0 +1,303 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause +/* + * ARM Juno Platform motherboard peripherals + * + * Copyright (c) 2013-2014 ARM Ltd + * + * This file is licensed under a dual GPLv2 or BSD license. + * + */ + +/ { + mb_clk24mhz: clk24mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "juno_mb:clk24mhz"; + }; + + mb_clk25mhz: clk25mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + clock-output-names = "juno_mb:clk25mhz"; + }; + + v2m_refclk1mhz: refclk1mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + clock-output-names = "juno_mb:refclk1mhz"; + }; + + v2m_refclk32khz: refclk32khz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "juno_mb:refclk32khz"; + }; + + mb_fixed_3v3: mcc-sb-3v3 { + compatible = "regulator-fixed"; + regulator-name = "MCC_SB_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power-button { + debounce-interval = <50>; + wakeup-source; + linux,code = <116>; + label = "POWER"; + gpios = <&iofpga_gpio0 0 0x4>; + }; + home-button { + debounce-interval = <50>; + wakeup-source; + linux,code = <102>; + label = "HOME"; + gpios = <&iofpga_gpio0 1 0x4>; + }; + rlock-button { + debounce-interval = <50>; + wakeup-source; + linux,code = <152>; + label = "RLOCK"; + gpios = <&iofpga_gpio0 2 0x4>; + }; + vol-up-button { + debounce-interval = <50>; + wakeup-source; + linux,code = <115>; + label = "VOL+"; + gpios = <&iofpga_gpio0 3 0x4>; + }; + vol-down-button { + debounce-interval = <50>; + wakeup-source; + linux,code = <114>; + label = "VOL-"; + gpios = <&iofpga_gpio0 4 0x4>; + }; + nmi-button { + debounce-interval = <50>; + wakeup-source; + linux,code = <99>; + label = "NMI"; + gpios = <&iofpga_gpio0 5 0x4>; + }; + }; + + bus@8000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0x8000000 0 0x8000000 0x18000000>; + + motherboard-bus@8000000 { + compatible = "arm,vexpress,v2p-p1", "simple-bus"; + #address-cells = <2>; /* SMB chipselect number and offset */ + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + arm,hbi = <0x252>; + arm,vexpress,site = <0>; + + flash@0 { + /* 2 * 32MiB NOR Flash memory mounted on CS0 */ + compatible = "arm,vexpress-flash", "cfi-flash"; + reg = <0 0x00000000 0x04000000>; + bank-width = <4>; + /* + * Unfortunately, accessing the flash disturbs + * the CPU idle states (suspend) and CPU + * hotplug of the platform. For this reason, + * flash hardware access is disabled by default. + */ + status = "disabled"; + partitions { + compatible = "arm,arm-firmware-suite"; + }; + }; + + ethernet@200000000 { + compatible = "smsc,lan9118", "smsc,lan9115"; + reg = <2 0x00000000 0x10000>; + interrupts = <3>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + clocks = <&mb_clk25mhz>; + vdd33a-supply = <&mb_fixed_3v3>; + vddvario-supply = <&mb_fixed_3v3>; + }; + + iofpga-bus@300000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 3 0 0x200000>; + + v2m_sysctl: sysctl@20000 { + compatible = "arm,sp810", "arm,primecell"; + reg = <0x020000 0x1000>; + clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&mb_clk24mhz>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; + assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>; + assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>; + }; + + apbregs@10000 { + compatible = "syscon", "simple-mfd"; + reg = <0x010000 0x1000>; + + led0 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x01>; + label = "vexpress:0"; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + led1 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x02>; + label = "vexpress:1"; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + led2 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x04>; + label = "vexpress:2"; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + led3 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x08>; + label = "vexpress:3"; + linux,default-trigger = "cpu1"; + default-state = "off"; + }; + led4 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x10>; + label = "vexpress:4"; + linux,default-trigger = "cpu2"; + default-state = "off"; + }; + led5 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x20>; + label = "vexpress:5"; + linux,default-trigger = "cpu3"; + default-state = "off"; + }; + led6 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x40>; + label = "vexpress:6"; + default-state = "off"; + }; + led7 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x80>; + label = "vexpress:7"; + default-state = "off"; + }; + }; + + mmc@50000 { + compatible = "arm,pl180", "arm,primecell"; + reg = <0x050000 0x1000>; + interrupts = <5>; + /* cd-gpios = <&v2m_mmc_gpios 0 0>; + wp-gpios = <&v2m_mmc_gpios 1 0>; */ + max-frequency = <12000000>; + vmmc-supply = <&mb_fixed_3v3>; + clocks = <&mb_clk24mhz>, <&soc_smc50mhz>; + clock-names = "mclk", "apb_pclk"; + }; + + kmi@60000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x060000 0x1000>; + interrupts = <8>; + clocks = <&mb_clk24mhz>, <&soc_smc50mhz>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + kmi@70000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x070000 0x1000>; + interrupts = <8>; + clocks = <&mb_clk24mhz>, <&soc_smc50mhz>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + watchdog@f0000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0f0000 0x10000>; + interrupts = <7>; + clocks = <&mb_clk24mhz>, <&soc_smc50mhz>; + clock-names = "wdog_clk", "apb_pclk"; + }; + + v2m_timer01: timer@110000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x110000 0x10000>; + interrupts = <9>; + clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&mb_clk24mhz>; + clock-names = "timclken1", "timclken2", "apb_pclk"; + }; + + v2m_timer23: timer@120000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x120000 0x10000>; + interrupts = <9>; + clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&mb_clk24mhz>; + clock-names = "timclken1", "timclken2", "apb_pclk"; + }; + + rtc@170000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x170000 0x10000>; + interrupts = <0>; + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + }; + + iofpga_gpio0: gpio@1d0000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x1d0000 0x1000>; + interrupts = <6>; + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + }; + }; +}; diff --git a/arch/arm/dts/juno-r2-u-boot.dtsi b/arch/arm/dts/juno-r2-u-boot.dtsi new file mode 100644 index 0000000000..72790666bb --- /dev/null +++ b/arch/arm/dts/juno-r2-u-boot.dtsi @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause +/* + * ARM Juno Platform additions for U-Boot + */ + +/ { + bus@8000000 { + motherboard-bus@8000000 { + /* + * This should not be marked "disabled" in U-Boot. The + * boot loader is not using some CPU idle states and + * hotplug but may be very interested in accessing the + * flash. + */ + flash@0 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/dts/juno-r2.dts b/arch/arm/dts/juno-r2.dts new file mode 100644 index 0000000000..52a6517d16 --- /dev/null +++ b/arch/arm/dts/juno-r2.dts @@ -0,0 +1,322 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause +/* + * ARM Ltd. Juno Platform + * + * Copyright (c) 2015 ARM Ltd. + * + * This file is licensed under a dual GPLv2 or BSD license. + */ + +/dts-v1/; + +#include +#include "juno-base.dtsi" +#include "juno-cs-r1r2.dtsi" + +/ { + model = "ARM Juno development board (r2)"; + compatible = "arm,juno-r2", "arm,juno", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &soc_uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&A72_0>; + }; + core1 { + cpu = <&A72_1>; + }; + }; + + cluster1 { + core0 { + cpu = <&A53_0>; + }; + core1 { + cpu = <&A53_1>; + }; + core2 { + cpu = <&A53_2>; + }; + core3 { + cpu = <&A53_3>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <300>; + exit-latency-us = <1200>; + min-residency-us = <2000>; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x1010000>; + local-timer-stop; + entry-latency-us = <400>; + exit-latency-us = <1200>; + min-residency-us = <2500>; + }; + }; + + A72_0: cpu@0 { + compatible = "arm,cortex-a72"; + reg = <0x0 0x0>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&A72_L2>; + clocks = <&scpi_dvfs 0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <450>; + }; + + A72_1: cpu@1 { + compatible = "arm,cortex-a72"; + reg = <0x0 0x1>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&A72_L2>; + clocks = <&scpi_dvfs 0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <450>; + }; + + A53_0: cpu@100 { + compatible = "arm,cortex-a53"; + reg = <0x0 0x100>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <485>; + dynamic-power-coefficient = <140>; + }; + + A53_1: cpu@101 { + compatible = "arm,cortex-a53"; + reg = <0x0 0x101>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <485>; + dynamic-power-coefficient = <140>; + }; + + A53_2: cpu@102 { + compatible = "arm,cortex-a53"; + reg = <0x0 0x102>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <485>; + dynamic-power-coefficient = <140>; + }; + + A53_3: cpu@103 { + compatible = "arm,cortex-a53"; + reg = <0x0 0x103>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <485>; + dynamic-power-coefficient = <140>; + }; + + A72_L2: l2-cache0 { + compatible = "cache"; + cache-size = <0x200000>; + cache-line-size = <64>; + cache-sets = <2048>; + }; + + A53_L2: l2-cache1 { + compatible = "cache"; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <1024>; + }; + }; + + pmu-a72 { + compatible = "arm,cortex-a72-pmu"; + interrupts = , + ; + interrupt-affinity = <&A72_0>, + <&A72_1>; + }; + + pmu-a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts = , + , + , + ; + interrupt-affinity = <&A53_0>, + <&A53_1>, + <&A53_2>, + <&A53_3>; + }; +}; + +&memtimer { + status = "okay"; +}; + +&pcie_ctlr { + status = "okay"; +}; + +&smmu_pcie { + status = "okay"; +}; + +&etm0 { + cpu = <&A72_0>; +}; + +&etm1 { + cpu = <&A72_1>; +}; + +&etm2 { + cpu = <&A53_0>; +}; + +&etm3 { + cpu = <&A53_1>; +}; + +&etm4 { + cpu = <&A53_2>; +}; + +&etm5 { + cpu = <&A53_3>; +}; + +&big_cluster_thermal_zone { + status = "okay"; +}; + +&little_cluster_thermal_zone { + status = "okay"; +}; + +&gpu0_thermal_zone { + status = "okay"; +}; + +&gpu1_thermal_zone { + status = "okay"; +}; + +&etf0_out_port { + remote-endpoint = <&csys2_funnel_in_port0>; +}; + +&replicator_in_port0 { + remote-endpoint = <&csys2_funnel_out_port>; +}; + +&csys1_funnel_in_port0 { + remote-endpoint = <&stm_out_port>; +}; + +&stm_out_port { + remote-endpoint = <&csys1_funnel_in_port0>; +}; + +&cpu_debug0 { + cpu = <&A72_0>; +}; + +&cpu_debug1 { + cpu = <&A72_1>; +}; + +&cpu_debug2 { + cpu = <&A53_0>; +}; + +&cpu_debug3 { + cpu = <&A53_1>; +}; + +&cpu_debug4 { + cpu = <&A53_2>; +}; + +&cpu_debug5 { + cpu = <&A53_3>; +}; diff --git a/configs/vexpress_aemv8a_juno_defconfig b/configs/vexpress_aemv8a_juno_defconfig index f6ff0e0a56..0ccd990b80 100644 --- a/configs/vexpress_aemv8a_juno_defconfig +++ b/configs/vexpress_aemv8a_juno_defconfig @@ -8,6 +8,7 @@ CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0xff000000 CONFIG_ENV_SIZE=0x10000 CONFIG_ENV_SECT_SIZE=0x10000 +CONFIG_DEFAULT_DEVICE_TREE="juno-r2" CONFIG_IDENT_STRING=" vexpress_aemv8a" CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x90000000 -- 2.39.5