From a674313c2cebfad8e168a2011027470a2e640983 Mon Sep 17 00:00:00 2001 From: Patrick Delaunay Date: Mon, 9 Jul 2018 15:17:19 +0200 Subject: [PATCH] dts: import stm32mp1 device tree from linux kernel This patch rebase the stm32mp1 device tree source from linux kernel v4.18-rc1. Signed-off-by: Patrick Delaunay --- arch/arm/dts/stm32mp15-ddr.dtsi | 12 +- arch/arm/dts/stm32mp157-pinctrl.dtsi | 359 +++++++ arch/arm/dts/stm32mp157-u-boot.dtsi | 20 +- arch/arm/dts/stm32mp157.dtsi | 380 ------- arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 2 +- arch/arm/dts/stm32mp157c-ed1.dts | 156 +-- arch/arm/dts/stm32mp157c.dtsi | 935 ++++++++++++++++++ include/dt-bindings/clock/stm32mp1-clks.h | 445 +++++---- include/dt-bindings/pinctrl/stm32-pinfunc.h | 6 + .../reset-controller/stm32mp1-resets.h | 97 -- include/dt-bindings/reset/stm32mp1-resets.h | 108 ++ 11 files changed, 1676 insertions(+), 844 deletions(-) create mode 100644 arch/arm/dts/stm32mp157-pinctrl.dtsi delete mode 100644 arch/arm/dts/stm32mp157.dtsi create mode 100644 arch/arm/dts/stm32mp157c.dtsi delete mode 100644 include/dt-bindings/reset-controller/stm32mp1-resets.h create mode 100644 include/dt-bindings/reset/stm32mp1-resets.h diff --git a/arch/arm/dts/stm32mp15-ddr.dtsi b/arch/arm/dts/stm32mp15-ddr.dtsi index 094f8424b4..4172c02f0a 100644 --- a/arch/arm/dts/stm32mp15-ddr.dtsi +++ b/arch/arm/dts/stm32mp15-ddr.dtsi @@ -13,12 +13,12 @@ reg = <0x5A003000 0x550 0x5A004000 0x234>; - clocks = <&rcc_clk AXIDCG>, - <&rcc_clk DDRC1>, - <&rcc_clk DDRC2>, - <&rcc_clk DDRPHYC>, - <&rcc_clk DDRCAPB>, - <&rcc_clk DDRPHYCAPB>; + clocks = <&rcc AXIDCG>, + <&rcc DDRC1>, + <&rcc DDRC2>, + <&rcc DDRPHYC>, + <&rcc DDRCAPB>, + <&rcc DDRPHYCAPB>; clock-names = "axidcg", "ddrc1", diff --git a/arch/arm/dts/stm32mp157-pinctrl.dtsi b/arch/arm/dts/stm32mp157-pinctrl.dtsi new file mode 100644 index 0000000000..c69c397964 --- /dev/null +++ b/arch/arm/dts/stm32mp157-pinctrl.dtsi @@ -0,0 +1,359 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2017 - All Rights Reserved + * Author: Ludovic Barre for STMicroelectronics. + */ +#include + +/ { + soc { + pinctrl: pin-controller@50002000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp157-pinctrl"; + ranges = <0 0x50002000 0xa400>; + interrupt-parent = <&exti>; + st,syscfg = <&exti 0x60 0xff>; + pins-are-numbered; + + gpioa: gpio@50002000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x400>; + clocks = <&rcc GPIOA>; + st,bank-name = "GPIOA"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x400>; + clocks = <&rcc GPIOB>; + st,bank-name = "GPIOB"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x400>; + clocks = <&rcc GPIOC>; + st,bank-name = "GPIOC"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x400>; + clocks = <&rcc GPIOD>; + st,bank-name = "GPIOD"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x400>; + clocks = <&rcc GPIOE>; + st,bank-name = "GPIOE"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000 0x400>; + clocks = <&rcc GPIOF>; + st,bank-name = "GPIOF"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@50008000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x6000 0x400>; + clocks = <&rcc GPIOG>; + st,bank-name = "GPIOG"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@50009000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x7000 0x400>; + clocks = <&rcc GPIOH>; + st,bank-name = "GPIOH"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 112 16>; + }; + + gpioi: gpio@5000a000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x8000 0x400>; + clocks = <&rcc GPIOI>; + st,bank-name = "GPIOI"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 128 16>; + }; + + gpioj: gpio@5000b000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x9000 0x400>; + clocks = <&rcc GPIOJ>; + st,bank-name = "GPIOJ"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 144 16>; + }; + + gpiok: gpio@5000c000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0xa000 0x400>; + clocks = <&rcc GPIOK>; + st,bank-name = "GPIOK"; + ngpios = <8>; + gpio-ranges = <&pinctrl 0 160 8>; + }; + + cec_pins_a: cec-0 { + pins { + pinmux = ; + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c1_pins_a: i2c1-0 { + pins { + pinmux = , /* I2C1_SCL */ + ; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_a: i2c2-0 { + pins { + pinmux = , /* I2C2_SCL */ + ; /* I2C2_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c5_pins_a: i2c5-0 { + pins { + pinmux = , /* I2C5_SCL */ + ; /* I2C5_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + pwm2_pins_a: pwm2-0 { + pins { + pinmux = ; /* TIM2_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm8_pins_a: pwm8-0 { + pins { + pinmux = ; /* TIM8_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm12_pins_a: pwm12-0 { + pins { + pinmux = ; /* TIM12_CH1 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + qspi_clk_pins_a: qspi-clk-0 { + pins { + pinmux = ; /* QSPI_CLK */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + }; + + qspi_bk1_pins_a: qspi-bk1-0 { + pins1 { + pinmux = , /* QSPI_BK1_IO0 */ + , /* QSPI_BK1_IO1 */ + , /* QSPI_BK1_IO2 */ + ; /* QSPI_BK1_IO3 */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + pins2 { + pinmux = ; /* QSPI_BK1_NCS */ + bias-pull-up; + drive-push-pull; + slew-rate = <3>; + }; + }; + + qspi_bk2_pins_a: qspi-bk2-0 { + pins1 { + pinmux = , /* QSPI_BK2_IO0 */ + , /* QSPI_BK2_IO1 */ + , /* QSPI_BK2_IO2 */ + ; /* QSPI_BK2_IO3 */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + pins2 { + pinmux = ; /* QSPI_BK2_NCS */ + bias-pull-up; + drive-push-pull; + slew-rate = <3>; + }; + }; + sdmmc1_b4_pins_a: sdmmc1-b4@0 { + pins { + pinmux = , /* SDMMC1_D0 */ + , /* SDMMC1_D1 */ + , /* SDMMC1_D2 */ + , /* SDMMC1_D3 */ + , /* SDMMC1_CK */ + ; /* SDMMC1_CMD */ + slew-rate = <3>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc1_dir_pins_a: sdmmc1-dir@0 { + pins { + pinmux = , /* SDMMC1_D0DIR */ + , /* SDMMC1_D123DIR */ + , /* SDMMC1_CDIR */ + ; /* SDMMC1_CKIN */ + slew-rate = <3>; + drive-push-pull; + bias-pull-up; + }; + }; + sdmmc2_b4_pins_a: sdmmc2-b4@0 { + pins { + pinmux = , /* SDMMC2_D0 */ + , /* SDMMC2_D1 */ + , /* SDMMC2_D2 */ + , /* SDMMC2_D3 */ + , /* SDMMC2_CK */ + ; /* SDMMC2_CMD */ + slew-rate = <3>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc2_d47_pins_a: sdmmc2-d47@0 { + pins { + pinmux = , /* SDMMC2_D4 */ + , /* SDMMC2_D5 */ + , /* SDMMC2_D6 */ + ; /* SDMMC2_D7 */ + slew-rate = <3>; + drive-push-pull; + bias-pull-up; + }; + }; + + uart4_pins_a: uart4-0 { + pins1 { + pinmux = ; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; /* UART4_RX */ + bias-disable; + }; + }; + }; + + pinctrl_z: pin-controller-z@54004000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp157-z-pinctrl"; + ranges = <0 0x54004000 0x400>; + pins-are-numbered; + interrupt-parent = <&exti>; + st,syscfg = <&exti 0x60 0xff>; + + gpioz: gpio@54004000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x400>; + clocks = <&rcc GPIOZ>; + st,bank-name = "GPIOZ"; + st,bank-ioport = <11>; + ngpios = <8>; + gpio-ranges = <&pinctrl_z 0 400 8>; + }; + + i2c4_pins_a: i2c4-0 { + pins { + pinmux = , /* I2C4_SCL */ + ; /* I2C4_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + }; + }; +}; diff --git a/arch/arm/dts/stm32mp157-u-boot.dtsi b/arch/arm/dts/stm32mp157-u-boot.dtsi index fa9fd29bdd..90d13f35c4 100644 --- a/arch/arm/dts/stm32mp157-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157-u-boot.dtsi @@ -29,13 +29,13 @@ soc { u-boot,dm-pre-reloc; - }; - stgen: stgen@5C008000 { - compatible = "st,stm32-stgen"; - reg = <0x5C008000 0x1000>; - status = "okay"; - u-boot,dm-pre-reloc; + stgen: stgen@5C008000 { + compatible = "st,stm32-stgen"; + reg = <0x5C008000 0x1000>; + status = "okay"; + u-boot,dm-pre-reloc; + }; }; }; @@ -63,14 +63,6 @@ u-boot,dm-pre-reloc; }; -&rcc_clk { - u-boot,dm-pre-reloc; -}; - -&rcc_rst { - u-boot,dm-pre-reloc; -}; - &rcc_reboot { u-boot,dm-pre-reloc; }; diff --git a/arch/arm/dts/stm32mp157.dtsi b/arch/arm/dts/stm32mp157.dtsi deleted file mode 100644 index 2b894162e9..0000000000 --- a/arch/arm/dts/stm32mp157.dtsi +++ /dev/null @@ -1,380 +0,0 @@ -/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ -/* - * Copyright (C) STMicroelectronics 2018 - All Rights Reserved - */ - -#include -#include -#include - -/ { - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - compatible = "arm,cortex-a7"; - device_type = "cpu"; - reg = <0>; - }; - - cpu1: cpu@1 { - compatible = "arm,cortex-a7"; - device_type = "cpu"; - reg = <1>; - }; - }; - - aliases { - serial3 = &uart4; - }; - - intc: interrupt-controller@a0021000 { - compatible = "arm,cortex-a7-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0xa0021000 0x1000>, - <0xa0022000 0x2000>; - }; - - clocks { - clk_hse: clk-hse { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24000000>; - }; - - clk_hsi: clk-hsi { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <64000000>; - }; - - clk_lse: clk-lse { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - }; - - clk_lsi: clk-lsi { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32000>; - }; - - clk_csi: clk-csi { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <4000000>; - }; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&intc>; - ranges; - - uart4: serial@40010000 { - compatible = "st,stm32h7-uart"; - reg = <0x40010000 0x400>; - clocks = <&rcc_clk UART4_K>; - status = "disabled"; - }; - - sdmmc3: sdmmc@48004000 { - compatible = "st,stm32-sdmmc2"; - reg = <0x48004000 0x400>, <0x48005000 0x400>; - reg-names = "sdmmc", "delay"; - interrupts = ; - clocks = <&rcc_clk SDMMC3_K>; - resets = <&rcc_rst SDMMC3_R>; - st,idma = <1>; - cap-sd-highspeed; - cap-mmc-highspeed; - max-frequency = <120000000>; - status = "disabled"; - }; - - rcc: rcc@50000000 { - compatible = "syscon", "simple-mfd"; - - reg = <0x50000000 0x1000>; - - rcc_clk: rcc-clk@50000000 { - #clock-cells = <1>; - compatible = "st,stm32mp1-rcc-clk"; - }; - - rcc_rst: rcc-reset@50000000 { - #reset-cells = <1>; - compatible = "st,stm32mp1-rcc-rst"; - }; - - rcc_reboot: rcc-reboot@50000000 { - compatible = "syscon-reboot"; - regmap = <&rcc>; - offset = <0x404>; - mask = <0x1>; - }; - }; - - pwr: pwr@50001000 { - compatible = "st,stm32mp1-pwr", "st,stm32-pwr", "syscon", "simple-mfd"; - reg = <0x50001000 0x400>; - system-power-controller; - interrupts = ; - st,sysrcc = <&rcc>; - clocks = <&rcc_clk PLL2_R>; - clock-names = "phyclk"; - - pwr-regulators@c { - compatible = "st,stm32mp1,pwr-reg"; - st,tzcr = <&rcc 0x0 0x1>; - - reg11: reg11 { - regulator-name = "reg11"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - }; - - reg18: reg18 { - regulator-name = "reg18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - usb33: usb33 { - regulator-name = "usb33"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - }; - }; - - vrefbuf: vrefbuf@50025000 { - compatible = "st,stm32-vrefbuf"; - reg = <0x50025000 0x8>; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <2500000>; - clocks = <&rcc_clk VREF>; - status = "disabled"; - }; - - pinctrl: pin-controller { - compatible = "st,stm32mp157-pinctrl"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x50002000 0xa400>; - pins-are-numbered; - - gpioa: gpio@50002000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x0 0x400>; - clocks = <&rcc_clk GPIOA>; - st,bank-name = "GPIOA"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 0 16>; - status = "disabled"; - }; - - gpiob: gpio@50003000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1000 0x400>; - clocks = <&rcc_clk GPIOB>; - st,bank-name = "GPIOB"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 16 16>; - status = "disabled"; - }; - - gpioc: gpio@50004000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2000 0x400>; - clocks = <&rcc_clk GPIOC>; - st,bank-name = "GPIOC"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 32 16>; - status = "disabled"; - }; - - gpiod: gpio@50005000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x3000 0x400>; - clocks = <&rcc_clk GPIOD>; - st,bank-name = "GPIOD"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 48 16>; - status = "disabled"; - }; - - gpioe: gpio@50006000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x4000 0x400>; - clocks = <&rcc_clk GPIOE>; - st,bank-name = "GPIOE"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 64 16>; - status = "disabled"; - }; - - gpiof: gpio@50007000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x5000 0x400>; - clocks = <&rcc_clk GPIOF>; - st,bank-name = "GPIOF"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 80 16>; - status = "disabled"; - }; - - gpiog: gpio@50008000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x6000 0x400>; - clocks = <&rcc_clk GPIOG>; - st,bank-name = "GPIOG"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 96 16>; - status = "disabled"; - }; - - gpioh: gpio@50009000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x7000 0x400>; - clocks = <&rcc_clk GPIOH>; - st,bank-name = "GPIOH"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 112 16>; - status = "disabled"; - }; - - gpioi: gpio@5000a000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x8000 0x400>; - clocks = <&rcc_clk GPIOI>; - st,bank-name = "GPIOI"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 128 16>; - status = "disabled"; - }; - - gpioj: gpio@5000b000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x9000 0x400>; - clocks = <&rcc_clk GPIOJ>; - st,bank-name = "GPIOJ"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 144 16>; - status = "disabled"; - }; - - gpiok: gpio@5000c000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0xa000 0x400>; - clocks = <&rcc_clk GPIOK>; - st,bank-name = "GPIOK"; - ngpios = <8>; - gpio-ranges = <&pinctrl 0 160 8>; - status = "disabled"; - }; - }; - - pinctrl_z: pin-controller-z { - compatible = "st,stm32mp157-z-pinctrl"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x54004000 0x400>; - pins-are-numbered; - - gpioz: gpio@54004000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0 0x400>; - clocks = <&rcc_clk GPIOZ>; - st,bank-name = "GPIOZ"; - st,bank-ioport = <11>; - ngpios = <8>; - gpio-ranges = <&pinctrl_z 0 400 8>; - status = "disabled"; - }; - }; - - sdmmc1: sdmmc@58005000 { - compatible = "st,stm32-sdmmc2"; - reg = <0x58005000 0x1000>, <0x58006000 0x1000>; - reg-names = "sdmmc", "delay"; - clocks = <&rcc_clk SDMMC1_K>; - resets = <&rcc_rst SDMMC1_R>; - st,idma = <1>; - cap-sd-highspeed; - cap-mmc-highspeed; - max-frequency = <120000000>; - status = "disabled"; - }; - - sdmmc2: sdmmc@58007000 { - compatible = "st,stm32-sdmmc2"; - reg = <0x58007000 0x1000>, <0x58008000 0x1000>; - reg-names = "sdmmc", "delay"; - interrupts = ; - clocks = <&rcc_clk SDMMC2_K>; - resets = <&rcc_rst SDMMC2_R>; - st,idma = <1>; - cap-sd-highspeed; - cap-mmc-highspeed; - max-frequency = <120000000>; - status = "disabled"; - }; - - i2c4: i2c@5c002000 { - compatible = "st,stm32f7-i2c"; - reg = <0x5c002000 0x400>; - interrupt-names = "event", "error", "wakeup"; - clocks = <&rcc_clk I2C4_K>; - resets = <&rcc_rst I2C4_R>; - #address-cells = <1>; - #size-cells = <0>; - wakeup-source; - status = "disabled"; - }; - }; -}; diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi index 5b8be93512..f6d1528aeb 100644 --- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi @@ -45,7 +45,7 @@ }; /* CLOCK init */ -&rcc_clk { +&rcc { st,clksrc = < CLK_MPU_PLL1P CLK_AXI_PLL2P diff --git a/arch/arm/dts/stm32mp157c-ed1.dts b/arch/arm/dts/stm32mp157c-ed1.dts index 2334707422..898deaf410 100644 --- a/arch/arm/dts/stm32mp157c-ed1.dts +++ b/arch/arm/dts/stm32mp157c-ed1.dts @@ -1,27 +1,24 @@ -/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * Copyright (C) STMicroelectronics 2017 - All Rights Reserved * Author: Ludovic Barre for STMicroelectronics. */ - /dts-v1/; -#include "stm32mp157.dtsi" +#include "stm32mp157c.dtsi" +#include "stm32mp157-pinctrl.dtsi" #include -#include -#include #include / { - model = "STMicroelectronics STM32MP157C pmic eval daughter"; + model = "STMicroelectronics STM32MP157C eval daughter"; compatible = "st,stm32mp157c-ed1", "st,stm32mp157"; chosen { - bootargs = "earlyprintk console=ttyS3,115200 root=/dev/ram"; stdout-path = "serial3:115200n8"; }; - memory { + memory@c0000000 { reg = <0xC0000000 0x40000000>; }; @@ -39,129 +36,14 @@ }; }; -&gpioa { - status = "okay"; -}; - -&gpiob { - status = "okay"; -}; - -&gpioc { - status = "okay"; -}; - -&gpiod { - status = "okay"; -}; - -&gpioe { - status = "okay"; -}; - -&gpiof { - status = "okay"; -}; - -&gpiog { +&rng1 { status = "okay"; }; -&gpioh { +&timers6 { status = "okay"; -}; - -&gpioi { - status = "okay"; -}; - -&gpioj { - status = "okay"; -}; - -&gpiok { - status = "okay"; -}; - -&gpioz { - status = "okay"; -}; - -&pinctrl { - uart4_pins_a: uart4@0 { - pins1 { - pinmux = ; /* UART4_TX */ - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins2 { - pinmux = ; /* UART4_RX */ - bias-disable; - }; - }; - - sdmmc1_b4_pins_a: sdmmc1-b4@0 { - pins { - pinmux = , /* SDMMC1_D0 */ - , /* SDMMC1_D1 */ - , /* SDMMC1_D2 */ - , /* SDMMC1_D3 */ - , /* SDMMC1_CK */ - ; /* SDMMC1_CMD */ - slew-rate = <3>; - drive-push-pull; - bias-disable; - }; - }; - - sdmmc1_dir_pins_a: sdmmc1-dir@0 { - pins { - pinmux = , /* SDMMC1_D0DIR */ - , /* SDMMC1_D123DIR */ - , /* SDMMC1_CDIR */ - ; /* SDMMC1_CKIN */ - slew-rate = <3>; - drive-push-pull; - bias-pull-up; - }; - }; - sdmmc2_b4_pins_a: sdmmc2-b4@0 { - pins { - pinmux = , /* SDMMC2_D0 */ - , /* SDMMC2_D1 */ - , /* SDMMC2_D2 */ - , /* SDMMC2_D3 */ - , /* SDMMC2_CK */ - ; /* SDMMC2_CMD */ - slew-rate = <3>; - drive-push-pull; - bias-pull-up; - }; - }; - - sdmmc2_d47_pins_a: sdmmc2-d47@0 { - pins { - pinmux = , /* SDMMC2_D4 */ - , /* SDMMC2_D5 */ - , /* SDMMC2_D6 */ - ; /* SDMMC2_D7 */ - slew-rate = <3>; - drive-push-pull; - bias-pull-up; - }; - }; -}; - -&pinctrl_z { - i2c4_pins_a: i2c4@0 { - pins { - pinmux = , /* I2C4_SCL */ - ; /* I2C4_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; + timer@5 { + status = "okay"; }; }; @@ -439,8 +321,11 @@ }; }; +&pwr { + pwr-supply = <&vdd>; +}; + &sdmmc1 { - pinctrl-names = "default"; pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; broken-cd; st,dirpol; @@ -458,7 +343,6 @@ }; &sdmmc2 { - pinctrl-names = "default"; pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>; non-removable; no-sd; @@ -466,6 +350,8 @@ st,dirpol; st,negedge; bus-width = <8>; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&vdd>; status = "okay"; }; @@ -474,3 +360,15 @@ pinctrl-0 = <&uart4_pins_a>; status = "okay"; }; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; diff --git a/arch/arm/dts/stm32mp157c.dtsi b/arch/arm/dts/stm32mp157c.dtsi new file mode 100644 index 0000000000..8df9f09dc6 --- /dev/null +++ b/arch/arm/dts/stm32mp157c.dtsi @@ -0,0 +1,935 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2017 - All Rights Reserved + * Author: Ludovic Barre for STMicroelectronics. + */ +#include +#include +#include + +/ { + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + }; + + psci { + compatible = "arm,psci"; + method = "smc"; + cpu_off = <0x84000002>; + cpu_on = <0x84000003>; + }; + + aliases { + gpio0 = &gpioa; + gpio1 = &gpiob; + gpio2 = &gpioc; + gpio3 = &gpiod; + gpio4 = &gpioe; + gpio5 = &gpiof; + gpio6 = &gpiog; + gpio7 = &gpioh; + gpio8 = &gpioi; + gpio9 = &gpioj; + gpio10 = &gpiok; + serial0 = &usart1; + serial1 = &usart2; + serial2 = &usart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &usart6; + serial6 = &uart7; + serial7 = &uart8; + }; + + intc: interrupt-controller@a0021000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0xa0021000 0x1000>, + <0xa0022000 0x2000>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = , + , + , + ; + interrupt-parent = <&intc>; + }; + + clocks { + clk_hse: clk-hse { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + clk_hsi: clk-hsi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <64000000>; + }; + + clk_lse: clk-lse { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + clk_lsi: clk-lsi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32000>; + }; + + clk_csi: clk-csi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <4000000>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + ranges; + + timers2: timer@40000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000000 0x400>; + clocks = <&rcc TIM2_K>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@1 { + compatible = "st,stm32h7-timer-trigger"; + reg = <1>; + status = "disabled"; + }; + }; + + timers3: timer@40001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001000 0x400>; + clocks = <&rcc TIM3_K>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@2 { + compatible = "st,stm32h7-timer-trigger"; + reg = <2>; + status = "disabled"; + }; + }; + + timers4: timer@40002000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40002000 0x400>; + clocks = <&rcc TIM4_K>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@3 { + compatible = "st,stm32h7-timer-trigger"; + reg = <3>; + status = "disabled"; + }; + }; + + timers5: timer@40003000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40003000 0x400>; + clocks = <&rcc TIM5_K>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@4 { + compatible = "st,stm32h7-timer-trigger"; + reg = <4>; + status = "disabled"; + }; + }; + + timers6: timer@40004000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40004000 0x400>; + clocks = <&rcc TIM6_K>; + clock-names = "int"; + status = "disabled"; + + timer@5 { + compatible = "st,stm32h7-timer-trigger"; + reg = <5>; + status = "disabled"; + }; + }; + + timers7: timer@40005000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40005000 0x400>; + clocks = <&rcc TIM7_K>; + clock-names = "int"; + status = "disabled"; + + timer@6 { + compatible = "st,stm32h7-timer-trigger"; + reg = <6>; + status = "disabled"; + }; + }; + + timers12: timer@40006000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40006000 0x400>; + clocks = <&rcc TIM12_K>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@11 { + compatible = "st,stm32h7-timer-trigger"; + reg = <11>; + status = "disabled"; + }; + }; + + timers13: timer@40007000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40007000 0x400>; + clocks = <&rcc TIM13_K>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@12 { + compatible = "st,stm32h7-timer-trigger"; + reg = <12>; + status = "disabled"; + }; + }; + + timers14: timer@40008000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40008000 0x400>; + clocks = <&rcc TIM14_K>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@13 { + compatible = "st,stm32h7-timer-trigger"; + reg = <13>; + status = "disabled"; + }; + }; + + lptimer1: timer@40009000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-lptimer"; + reg = <0x40009000 0x400>; + clocks = <&rcc LPTIM1_K>; + clock-names = "mux"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + #pwm-cells = <3>; + status = "disabled"; + }; + + trigger@0 { + compatible = "st,stm32-lptimer-trigger"; + reg = <0>; + status = "disabled"; + }; + + counter { + compatible = "st,stm32-lptimer-counter"; + status = "disabled"; + }; + }; + + usart2: serial@4000e000 { + compatible = "st,stm32h7-uart"; + reg = <0x4000e000 0x400>; + interrupts = ; + clocks = <&rcc USART2_K>; + status = "disabled"; + }; + + usart3: serial@4000f000 { + compatible = "st,stm32h7-uart"; + reg = <0x4000f000 0x400>; + interrupts = ; + clocks = <&rcc USART3_K>; + status = "disabled"; + }; + + uart4: serial@40010000 { + compatible = "st,stm32h7-uart"; + reg = <0x40010000 0x400>; + interrupts = ; + clocks = <&rcc UART4_K>; + status = "disabled"; + }; + + uart5: serial@40011000 { + compatible = "st,stm32h7-uart"; + reg = <0x40011000 0x400>; + interrupts = ; + clocks = <&rcc UART5_K>; + status = "disabled"; + }; + + i2c1: i2c@40012000 { + compatible = "st,stm32f7-i2c"; + reg = <0x40012000 0x400>; + interrupt-names = "event", "error"; + interrupts = , + ; + clocks = <&rcc I2C1_K>; + resets = <&rcc I2C1_R>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@40013000 { + compatible = "st,stm32f7-i2c"; + reg = <0x40013000 0x400>; + interrupt-names = "event", "error"; + interrupts = , + ; + clocks = <&rcc I2C2_K>; + resets = <&rcc I2C2_R>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@40014000 { + compatible = "st,stm32f7-i2c"; + reg = <0x40014000 0x400>; + interrupt-names = "event", "error"; + interrupts = , + ; + clocks = <&rcc I2C3_K>; + resets = <&rcc I2C3_R>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@40015000 { + compatible = "st,stm32f7-i2c"; + reg = <0x40015000 0x400>; + interrupt-names = "event", "error"; + interrupts = , + ; + clocks = <&rcc I2C5_K>; + resets = <&rcc I2C5_R>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + cec: cec@40016000 { + compatible = "st,stm32-cec"; + reg = <0x40016000 0x400>; + interrupts = ; + clocks = <&rcc CEC_K>, <&clk_lse>; + clock-names = "cec", "hdmi-cec"; + status = "disabled"; + }; + + dac: dac@40017000 { + compatible = "st,stm32h7-dac-core"; + reg = <0x40017000 0x400>; + clocks = <&rcc DAC12>; + clock-names = "pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + dac1: dac@1 { + compatible = "st,stm32-dac"; + #io-channels-cells = <1>; + reg = <1>; + status = "disabled"; + }; + + dac2: dac@2 { + compatible = "st,stm32-dac"; + #io-channels-cells = <1>; + reg = <2>; + status = "disabled"; + }; + }; + + uart7: serial@40018000 { + compatible = "st,stm32h7-uart"; + reg = <0x40018000 0x400>; + interrupts = ; + clocks = <&rcc UART7_K>; + status = "disabled"; + }; + + uart8: serial@40019000 { + compatible = "st,stm32h7-uart"; + reg = <0x40019000 0x400>; + interrupts = ; + clocks = <&rcc UART8_K>; + status = "disabled"; + }; + + timers1: timer@44000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x44000000 0x400>; + clocks = <&rcc TIM1_K>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@0 { + compatible = "st,stm32h7-timer-trigger"; + reg = <0>; + status = "disabled"; + }; + }; + + timers8: timer@44001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x44001000 0x400>; + clocks = <&rcc TIM8_K>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@7 { + compatible = "st,stm32h7-timer-trigger"; + reg = <7>; + status = "disabled"; + }; + }; + + usart6: serial@44003000 { + compatible = "st,stm32h7-uart"; + reg = <0x44003000 0x400>; + interrupts = ; + clocks = <&rcc USART6_K>; + status = "disabled"; + }; + + timers15: timer@44006000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x44006000 0x400>; + clocks = <&rcc TIM15_K>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@14 { + compatible = "st,stm32h7-timer-trigger"; + reg = <14>; + status = "disabled"; + }; + }; + + timers16: timer@44007000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x44007000 0x400>; + clocks = <&rcc TIM16_K>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + timer@15 { + compatible = "st,stm32h7-timer-trigger"; + reg = <15>; + status = "disabled"; + }; + }; + + timers17: timer@44008000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x44008000 0x400>; + clocks = <&rcc TIM17_K>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@16 { + compatible = "st,stm32h7-timer-trigger"; + reg = <16>; + status = "disabled"; + }; + }; + + dma1: dma@48000000 { + compatible = "st,stm32-dma"; + reg = <0x48000000 0x400>; + interrupts = , + , + , + , + , + , + , + ; + clocks = <&rcc DMA1>; + #dma-cells = <4>; + st,mem2mem; + dma-requests = <8>; + }; + + dma2: dma@48001000 { + compatible = "st,stm32-dma"; + reg = <0x48001000 0x400>; + interrupts = , + , + , + , + , + , + , + ; + clocks = <&rcc DMA2>; + #dma-cells = <4>; + st,mem2mem; + dma-requests = <8>; + }; + + dmamux1: dma-router@48002000 { + compatible = "st,stm32h7-dmamux"; + reg = <0x48002000 0x1c>; + #dma-cells = <3>; + dma-requests = <128>; + dma-masters = <&dma1 &dma2>; + dma-channels = <16>; + clocks = <&rcc DMAMUX>; + }; + + sdmmc3: sdmmc@48004000 { + compatible = "st,stm32-sdmmc2"; + reg = <0x48004000 0x400>, <0x48005000 0x400>; + reg-names = "sdmmc", "delay"; + interrupts = ; + clocks = <&rcc SDMMC3_K>; + resets = <&rcc SDMMC3_R>; + st,idma = <1>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <120000000>; + status = "disabled"; + }; + + rcc: rcc@50000000 { + compatible = "st,stm32mp1-rcc", "syscon"; + reg = <0x50000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + rcc_reboot: rcc-reboot@50000000 { + compatible = "syscon-reboot"; + regmap = <&rcc>; + offset = <0x404>; + mask = <0x1>; + }; + + pwr: pwr@50001000 { + compatible = "st,stm32mp1-pwr", "st,stm32-pwr", "syscon", "simple-mfd"; + reg = <0x50001000 0x400>; + system-power-controller; + interrupts = ; + st,sysrcc = <&rcc>; + clocks = <&rcc PLL2_R>; + clock-names = "phyclk"; + + pwr-regulators@c { + compatible = "st,stm32mp1,pwr-reg"; + st,tzcr = <&rcc 0x0 0x1>; + + reg11: reg11 { + regulator-name = "reg11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + reg18: reg18 { + regulator-name = "reg18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + usb33: usb33 { + regulator-name = "usb33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + + exti: interrupt-controller@5000d000 { + compatible = "st,stm32mp1-exti", "syscon"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000d000 0x400>; + }; + + syscfg: system-config@50020000 { + compatible = "st,stm32-syscfg", "syscon"; + reg = <0x50020000 0x400>; + }; + + lptimer2: timer@50021000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-lptimer"; + reg = <0x50021000 0x400>; + clocks = <&rcc LPTIM2_K>; + clock-names = "mux"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + #pwm-cells = <3>; + status = "disabled"; + }; + + trigger@1 { + compatible = "st,stm32-lptimer-trigger"; + reg = <1>; + status = "disabled"; + }; + + counter { + compatible = "st,stm32-lptimer-counter"; + status = "disabled"; + }; + }; + + lptimer3: timer@50022000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-lptimer"; + reg = <0x50022000 0x400>; + clocks = <&rcc LPTIM3_K>; + clock-names = "mux"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + #pwm-cells = <3>; + status = "disabled"; + }; + + trigger@2 { + compatible = "st,stm32-lptimer-trigger"; + reg = <2>; + status = "disabled"; + }; + }; + + lptimer4: timer@50023000 { + compatible = "st,stm32-lptimer"; + reg = <0x50023000 0x400>; + clocks = <&rcc LPTIM4_K>; + clock-names = "mux"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + #pwm-cells = <3>; + status = "disabled"; + }; + }; + + lptimer5: timer@50024000 { + compatible = "st,stm32-lptimer"; + reg = <0x50024000 0x400>; + clocks = <&rcc LPTIM5_K>; + clock-names = "mux"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + #pwm-cells = <3>; + status = "disabled"; + }; + }; + + vrefbuf: vrefbuf@50025000 { + compatible = "st,stm32-vrefbuf"; + reg = <0x50025000 0x8>; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2500000>; + clocks = <&rcc VREF>; + status = "disabled"; + }; + + cryp1: cryp@54001000 { + compatible = "st,stm32mp1-cryp"; + reg = <0x54001000 0x400>; + interrupts = ; + clocks = <&rcc CRYP1>; + resets = <&rcc CRYP1_R>; + status = "disabled"; + }; + + rng1: rng@54003000 { + compatible = "st,stm32-rng"; + reg = <0x54003000 0x400>; + clocks = <&rcc RNG1_K>; + resets = <&rcc RNG1_R>; + status = "disabled"; + }; + + mdma1: dma@58000000 { + compatible = "st,stm32h7-mdma"; + reg = <0x58000000 0x1000>; + interrupts = ; + clocks = <&rcc MDMA>; + #dma-cells = <5>; + dma-channels = <32>; + dma-requests = <48>; + }; + + qspi: qspi@58003000 { + compatible = "st,stm32f469-qspi"; + reg = <0x58003000 0x1000>, <0x70000000 0x10000000>; + reg-names = "qspi", "qspi_mm"; + interrupts = ; + clocks = <&rcc QSPI_K>; + resets = <&rcc QSPI_R>; + status = "disabled"; + }; + + sdmmc1: sdmmc@58005000 { + compatible = "st,stm32-sdmmc2"; + reg = <0x58005000 0x1000>, <0x58006000 0x1000>; + reg-names = "sdmmc", "delay"; + clocks = <&rcc SDMMC1_K>; + resets = <&rcc SDMMC1_R>; + st,idma = <1>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <120000000>; + status = "disabled"; + }; + + sdmmc2: sdmmc@58007000 { + compatible = "st,stm32-sdmmc2"; + reg = <0x58007000 0x1000>, <0x58008000 0x1000>; + reg-names = "sdmmc", "delay"; + interrupts = ; + clocks = <&rcc SDMMC2_K>; + resets = <&rcc SDMMC2_R>; + st,idma = <1>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <120000000>; + status = "disabled"; + }; + + crc1: crc@58009000 { + compatible = "st,stm32f7-crc"; + reg = <0x58009000 0x400>; + clocks = <&rcc CRC1>; + status = "disabled"; + }; + + usbh_ohci: usbh-ohci@5800c000 { + compatible = "generic-ohci"; + reg = <0x5800c000 0x1000>; + clocks = <&rcc USBH>; + resets = <&rcc USBH_R>; + interrupts = ; + status = "disabled"; + }; + + usbh_ehci: usbh-ehci@5800d000 { + compatible = "generic-ehci"; + reg = <0x5800d000 0x1000>; + clocks = <&rcc USBH>; + resets = <&rcc USBH_R>; + interrupts = ; + companion = <&usbh_ohci>; + status = "disabled"; + }; + + dsi: dsi@5a000000 { + compatible = "st,stm32-dsi"; + reg = <0x5a000000 0x800>; + clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>; + clock-names = "pclk", "ref", "px_clk"; + resets = <&rcc DSI_R>; + reset-names = "apb"; + status = "disabled"; + }; + + ltdc: display-controller@5a001000 { + compatible = "st,stm32-ltdc"; + reg = <0x5a001000 0x400>; + interrupts = , + ; + clocks = <&rcc LTDC_PX>; + clock-names = "lcd"; + resets = <&rcc LTDC_R>; + status = "disabled"; + }; + + usbphyc: usbphyc@5a006000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32mp1-usbphyc"; + reg = <0x5a006000 0x1000>; + clocks = <&rcc USBPHY_K>; + resets = <&rcc USBPHY_R>; + status = "disabled"; + + usbphyc_port0: usb-phy@0 { + #phy-cells = <0>; + reg = <0>; + }; + + usbphyc_port1: usb-phy@1 { + #phy-cells = <1>; + reg = <1>; + }; + }; + + usart1: serial@5c000000 { + compatible = "st,stm32h7-uart"; + reg = <0x5c000000 0x400>; + interrupts = ; + clocks = <&rcc USART1_K>; + status = "disabled"; + }; + + i2c4: i2c@5c002000 { + compatible = "st,stm32f7-i2c"; + reg = <0x5c002000 0x400>; + interrupt-names = "event", "error"; + interrupts = , + ; + clocks = <&rcc I2C4_K>; + resets = <&rcc I2C4_R>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@5c009000 { + compatible = "st,stm32f7-i2c"; + reg = <0x5c009000 0x400>; + interrupt-names = "event", "error"; + interrupts = , + ; + clocks = <&rcc I2C6_K>; + resets = <&rcc I2C6_R>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; +}; diff --git a/include/dt-bindings/clock/stm32mp1-clks.h b/include/dt-bindings/clock/stm32mp1-clks.h index 16431581b9..90ec780bfc 100644 --- a/include/dt-bindings/clock/stm32mp1-clks.h +++ b/include/dt-bindings/clock/stm32mp1-clks.h @@ -1,243 +1,254 @@ /* SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause */ /* - * Copyright (C) STMicroelectronics 2017 - All Rights Reserved + * Copyright (C) STMicroelectronics 2018 - All Rights Reserved * Author: Gabriel Fernandez for STMicroelectronics. */ + +#ifndef _DT_BINDINGS_STM32MP1_CLKS_H_ +#define _DT_BINDINGS_STM32MP1_CLKS_H_ + /* OSCILLATOR clocks */ -#define CK_HSE 0 -#define CK_CSI 1 -#define CK_LSI 2 -#define CK_LSE 3 -#define CK_HSI 4 -#define CK_HSE_DIV2 5 +#define CK_HSE 0 +#define CK_CSI 1 +#define CK_LSI 2 +#define CK_LSE 3 +#define CK_HSI 4 +#define CK_HSE_DIV2 5 /* Bus clocks */ -#define TIM2 6 -#define TIM3 7 -#define TIM4 8 -#define TIM5 9 -#define TIM6 10 -#define TIM7 11 -#define TIM12 12 -#define TIM13 13 -#define TIM14 14 -#define LPTIM1 15 -#define SPI2 16 -#define SPI3 17 -#define USART2 18 -#define USART3 19 -#define UART4 20 -#define UART5 21 -#define UART7 22 -#define UART8 23 -#define I2C1 24 -#define I2C2 25 -#define I2C3 26 -#define I2C5 27 -#define SPDIF 28 -#define CEC 29 -#define DAC12 30 -#define MDIO 31 -#define TIM1 32 -#define TIM8 33 -#define TIM15 34 -#define TIM16 35 -#define TIM17 36 -#define SPI1 37 -#define SPI4 38 -#define SPI5 39 -#define USART6 40 -#define SAI1 41 -#define SAI2 42 -#define SAI3 43 -#define DFSDM 44 -#define FDCAN 45 -#define LPTIM2 46 -#define LPTIM3 47 -#define LPTIM4 48 -#define LPTIM5 49 -#define SAI4 50 -#define SYSCFG 51 -#define VREF 52 -#define TMPSENS 53 -#define PMBCTRL 54 -#define HDP 55 -#define LTDC 56 -#define DSI 57 -#define IWDG2 58 -#define USBPHY 59 -#define STGENRO 60 -#define SPI6 61 -#define I2C4 62 -#define I2C6 63 -#define USART1 64 -#define RTCAPB 65 -#define TZC 66 -#define TZPC 67 -#define IWDG1 68 -#define BSEC 69 -#define STGEN 70 -#define DMA1 71 -#define DMA2 72 -#define DMAMUX 73 -#define ADC12 74 -#define USBO 75 -#define SDMMC3 76 -#define DCMI 77 -#define CRYP2 78 -#define HASH2 79 -#define RNG2 80 -#define CRC2 81 -#define HSEM 82 -#define IPCC 83 -#define GPIOA 84 -#define GPIOB 85 -#define GPIOC 86 -#define GPIOD 87 -#define GPIOE 88 -#define GPIOF 89 -#define GPIOG 90 -#define GPIOH 91 -#define GPIOI 92 -#define GPIOJ 93 -#define GPIOK 94 -#define GPIOZ 95 -#define CRYP1 96 -#define HASH1 97 -#define RNG1 98 -#define BKPSRAM 99 -#define MDMA 100 -#define DMA2D 101 -#define GPU 102 -#define ETHCK 103 -#define ETHTX 104 -#define ETHRX 105 -#define ETHMAC 106 -#define FMC 107 -#define QSPI 108 -#define SDMMC1 109 -#define SDMMC2 110 -#define CRC1 111 -#define USBH 112 -#define ETHSTP 113 +#define TIM2 6 +#define TIM3 7 +#define TIM4 8 +#define TIM5 9 +#define TIM6 10 +#define TIM7 11 +#define TIM12 12 +#define TIM13 13 +#define TIM14 14 +#define LPTIM1 15 +#define SPI2 16 +#define SPI3 17 +#define USART2 18 +#define USART3 19 +#define UART4 20 +#define UART5 21 +#define UART7 22 +#define UART8 23 +#define I2C1 24 +#define I2C2 25 +#define I2C3 26 +#define I2C5 27 +#define SPDIF 28 +#define CEC 29 +#define DAC12 30 +#define MDIO 31 +#define TIM1 32 +#define TIM8 33 +#define TIM15 34 +#define TIM16 35 +#define TIM17 36 +#define SPI1 37 +#define SPI4 38 +#define SPI5 39 +#define USART6 40 +#define SAI1 41 +#define SAI2 42 +#define SAI3 43 +#define DFSDM 44 +#define FDCAN 45 +#define LPTIM2 46 +#define LPTIM3 47 +#define LPTIM4 48 +#define LPTIM5 49 +#define SAI4 50 +#define SYSCFG 51 +#define VREF 52 +#define TMPSENS 53 +#define PMBCTRL 54 +#define HDP 55 +#define LTDC 56 +#define DSI 57 +#define IWDG2 58 +#define USBPHY 59 +#define STGENRO 60 +#define SPI6 61 +#define I2C4 62 +#define I2C6 63 +#define USART1 64 +#define RTCAPB 65 +#define TZC1 66 +#define TZPC 67 +#define IWDG1 68 +#define BSEC 69 +#define STGEN 70 +#define DMA1 71 +#define DMA2 72 +#define DMAMUX 73 +#define ADC12 74 +#define USBO 75 +#define SDMMC3 76 +#define DCMI 77 +#define CRYP2 78 +#define HASH2 79 +#define RNG2 80 +#define CRC2 81 +#define HSEM 82 +#define IPCC 83 +#define GPIOA 84 +#define GPIOB 85 +#define GPIOC 86 +#define GPIOD 87 +#define GPIOE 88 +#define GPIOF 89 +#define GPIOG 90 +#define GPIOH 91 +#define GPIOI 92 +#define GPIOJ 93 +#define GPIOK 94 +#define GPIOZ 95 +#define CRYP1 96 +#define HASH1 97 +#define RNG1 98 +#define BKPSRAM 99 +#define MDMA 100 +#define GPU 101 +#define ETHCK 102 +#define ETHTX 103 +#define ETHRX 104 +#define ETHMAC 105 +#define FMC 106 +#define QSPI 107 +#define SDMMC1 108 +#define SDMMC2 109 +#define CRC1 110 +#define USBH 111 +#define ETHSTP 112 +#define TZC2 113 /* Kernel clocks */ -#define SDMMC1_K 114 -#define SDMMC2_K 115 -#define SDMMC3_K 116 -#define FMC_K 117 -#define QSPI_K 118 -#define ETHMAC_K 119 -#define RNG1_K 120 -#define RNG2_K 121 -#define GPU_K 122 -#define USBPHY_K 123 -#define STGEN_K 124 -#define SPDIF_K 125 -#define SPI1_K 126 -#define SPI2_K 127 -#define SPI3_K 128 -#define SPI4_K 129 -#define SPI5_K 130 -#define SPI6_K 131 -#define CEC_K 132 -#define I2C1_K 133 -#define I2C2_K 134 -#define I2C3_K 135 -#define I2C4_K 136 -#define I2C5_K 137 -#define I2C6_K 138 -#define LPTIM1_K 139 -#define LPTIM2_K 140 -#define LPTIM3_K 141 -#define LPTIM4_K 142 -#define LPTIM5_K 143 -#define USART1_K 144 -#define USART2_K 145 -#define USART3_K 146 -#define UART4_K 147 -#define UART5_K 148 -#define USART6_K 149 -#define UART7_K 150 -#define UART8_K 151 -#define DFSDM_K 152 -#define FDCAN_K 153 -#define SAI1_K 154 -#define SAI2_K 155 -#define SAI3_K 156 -#define SAI4_K 157 -#define ADC12_K 158 -#define DSI_K 159 -#define ADFSDM_K 160 -#define USBO_K 161 -#define LTDC_K 162 +#define SDMMC1_K 118 +#define SDMMC2_K 119 +#define SDMMC3_K 120 +#define FMC_K 121 +#define QSPI_K 122 +#define ETHCK_K 123 +#define RNG1_K 124 +#define RNG2_K 125 +#define GPU_K 126 +#define USBPHY_K 127 +#define STGEN_K 128 +#define SPDIF_K 129 +#define SPI1_K 130 +#define SPI2_K 131 +#define SPI3_K 132 +#define SPI4_K 133 +#define SPI5_K 134 +#define SPI6_K 135 +#define CEC_K 136 +#define I2C1_K 137 +#define I2C2_K 138 +#define I2C3_K 139 +#define I2C4_K 140 +#define I2C5_K 141 +#define I2C6_K 142 +#define LPTIM1_K 143 +#define LPTIM2_K 144 +#define LPTIM3_K 145 +#define LPTIM4_K 146 +#define LPTIM5_K 147 +#define USART1_K 148 +#define USART2_K 149 +#define USART3_K 150 +#define UART4_K 151 +#define UART5_K 152 +#define USART6_K 153 +#define UART7_K 154 +#define UART8_K 155 +#define DFSDM_K 156 +#define FDCAN_K 157 +#define SAI1_K 158 +#define SAI2_K 159 +#define SAI3_K 160 +#define SAI4_K 161 +#define ADC12_K 162 +#define DSI_K 163 +#define DSI_PX 164 +#define ADFSDM_K 165 +#define USBO_K 166 +#define LTDC_PX 167 +#define DAC12_K 168 +#define ETHPTP_K 169 /* PLL */ -#define PLL1 163 -#define PLL2 164 -#define PLL3 165 -#define PLL4 166 +#define PLL1 176 +#define PLL2 177 +#define PLL3 178 +#define PLL4 179 /* ODF */ -#define PLL1_P 167 -#define PLL1_Q 168 -#define PLL1_R 169 -#define PLL2_P 170 -#define PLL2_Q 171 -#define PLL2_R 172 -#define PLL3_P 173 -#define PLL3_Q 174 -#define PLL3_R 175 -#define PLL4_P 176 -#define PLL4_Q 177 -#define PLL4_R 178 +#define PLL1_P 180 +#define PLL1_Q 181 +#define PLL1_R 182 +#define PLL2_P 183 +#define PLL2_Q 184 +#define PLL2_R 185 +#define PLL3_P 186 +#define PLL3_Q 187 +#define PLL3_R 188 +#define PLL4_P 189 +#define PLL4_Q 190 +#define PLL4_R 191 /* AUX */ -#define RTC 179 +#define RTC 192 /* MCLK */ -#define CK_PER 180 -#define CK_MPU 181 -#define CK_AXI 182 -#define CK_MCU 183 +#define CK_PER 193 +#define CK_MPU 194 +#define CK_AXI 195 +#define CK_MCU 196 /* Time base */ -#define TIM2_K 184 -#define TIM3_K 185 -#define TIM4_K 186 -#define TIM5_K 187 -#define TIM6_K 188 -#define TIM7_K 189 -#define TIM12_K 190 -#define TIM13_K 191 -#define TIM14_K 192 -#define TIM1_K 193 -#define TIM8_K 194 -#define TIM15_K 195 -#define TIM16_K 196 -#define TIM17_K 197 +#define TIM2_K 197 +#define TIM3_K 198 +#define TIM4_K 199 +#define TIM5_K 200 +#define TIM6_K 201 +#define TIM7_K 202 +#define TIM12_K 203 +#define TIM13_K 204 +#define TIM14_K 205 +#define TIM1_K 206 +#define TIM8_K 207 +#define TIM15_K 208 +#define TIM16_K 209 +#define TIM17_K 210 /* MCO clocks */ -#define CK_MCO1 198 -#define CK_MCO2 199 +#define CK_MCO1 211 +#define CK_MCO2 212 /* TRACE & DEBUG clocks */ -#define DBG 200 -#define CK_DBG 201 -#define CK_TRACE 202 +#define CK_DBG 214 +#define CK_TRACE 215 /* DDR */ -#define DDRC1 203 -#define DDRC1LP 204 -#define DDRC2 205 -#define DDRC2LP 206 -#define DDRPHYC 207 -#define DDRPHYCLP 208 -#define DDRCAPB 209 -#define DDRCAPBLP 210 -#define AXIDCG 211 -#define DDRPHYCAPB 212 -#define DDRPHYCAPBLP 213 -#define DDRPERFM 214 +#define DDRC1 220 +#define DDRC1LP 221 +#define DDRC2 222 +#define DDRC2LP 223 +#define DDRPHYC 224 +#define DDRPHYCLP 225 +#define DDRCAPB 226 +#define DDRCAPBLP 227 +#define AXIDCG 228 +#define DDRPHYCAPB 229 +#define DDRPHYCAPBLP 230 +#define DDRPERFM 231 + +#define STM32MP1_LAST_CLK 232 + +#define LTDC_K LTDC_PX +#define ETHMAC_K ETHCK_K -#define STM32MP1_LAST_CLK 215 +#endif /* _DT_BINDINGS_STM32MP1_CLKS_H_ */ diff --git a/include/dt-bindings/pinctrl/stm32-pinfunc.h b/include/dt-bindings/pinctrl/stm32-pinfunc.h index b8dfe31821..b5a2174a63 100644 --- a/include/dt-bindings/pinctrl/stm32-pinfunc.h +++ b/include/dt-bindings/pinctrl/stm32-pinfunc.h @@ -1,3 +1,9 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* + * Copyright (C) STMicroelectronics 2017 - All Rights Reserved + * Author: Torgue Alexandre for STMicroelectronics. + */ + #ifndef _DT_BINDINGS_STM32_PINFUNC_H #define _DT_BINDINGS_STM32_PINFUNC_H diff --git a/include/dt-bindings/reset-controller/stm32mp1-resets.h b/include/dt-bindings/reset-controller/stm32mp1-resets.h deleted file mode 100644 index f279f8f51d..0000000000 --- a/include/dt-bindings/reset-controller/stm32mp1-resets.h +++ /dev/null @@ -1,97 +0,0 @@ -#define LTDC_R 3072 -#define DSI_R 3076 -#define DDRPERFM_R 3080 -#define USBPHY_R 3088 -#define SPI6_R 3136 -#define I2C4_R 3138 -#define I2C6_R 3139 -#define USART1_R 3140 -#define STGEN_R 3156 -#define GPIOZ_R 3200 -#define CRYP1_R 3204 -#define HASH1_R 3205 -#define RNG1_R 3206 -#define AXIM_R 3216 -#define GPU_R 3269 -#define ETHMAC_R 3274 -#define FMC_R 3276 -#define QSPI_R 3278 -#define SDMMC1_R 3280 -#define SDMMC2_R 3281 -#define CRC1_R 3284 -#define USBH_R 3288 -#define MDMA_R 3328 -#define MCU_R 8225 -#define TIM2_R 19456 -#define TIM3_R 19457 -#define TIM4_R 19458 -#define TIM5_R 19459 -#define TIM6_R 19460 -#define TIM7_R 19461 -#define TIM12_R 16462 -#define TIM13_R 16463 -#define TIM14_R 16464 -#define LPTIM1_R 19465 -#define SPI2_R 19467 -#define SPI3_R 19468 -#define USART2_R 19470 -#define USART3_R 19471 -#define UART4_R 19472 -#define UART5_R 19473 -#define UART7_R 19474 -#define UART8_R 19475 -#define I2C1_R 19477 -#define I2C2_R 19478 -#define I2C3_R 19479 -#define I2C5_R 19480 -#define SPDIF_R 19482 -#define CEC_R 19483 -#define DAC12_R 19485 -#define MDIO_R 19847 -#define TIM1_R 19520 -#define TIM8_R 19521 -#define TIM15_R 19522 -#define TIM16_R 19523 -#define TIM17_R 19524 -#define SPI1_R 19528 -#define SPI4_R 19529 -#define SPI5_R 19530 -#define USART6_R 19533 -#define SAI1_R 19536 -#define SAI2_R 19537 -#define SAI3_R 19538 -#define DFSDM_R 19540 -#define FDCAN_R 19544 -#define LPTIM2_R 19584 -#define LPTIM3_R 19585 -#define LPTIM4_R 19586 -#define LPTIM5_R 19587 -#define SAI4_R 19592 -#define SYSCFG_R 19595 -#define VREF_R 19597 -#define TMPSENS_R 19600 -#define PMBCTRL_R 19601 -#define DMA1_R 19648 -#define DMA2_R 19649 -#define DMAMUX_R 19650 -#define ADC12_R 19653 -#define USBO_R 19656 -#define SDMMC3_R 19664 -#define CAMITF_R 19712 -#define CRYP2_R 19716 -#define HASH2_R 19717 -#define RNG2_R 19718 -#define CRC2_R 19719 -#define HSEM_R 19723 -#define MBOX_R 19724 -#define GPIOA_R 19776 -#define GPIOB_R 19777 -#define GPIOC_R 19778 -#define GPIOD_R 19779 -#define GPIOE_R 19780 -#define GPIOF_R 19781 -#define GPIOG_R 19782 -#define GPIOH_R 19783 -#define GPIOI_R 19784 -#define GPIOJ_R 19785 -#define GPIOK_R 19786 diff --git a/include/dt-bindings/reset/stm32mp1-resets.h b/include/dt-bindings/reset/stm32mp1-resets.h new file mode 100644 index 0000000000..f0c3aaef67 --- /dev/null +++ b/include/dt-bindings/reset/stm32mp1-resets.h @@ -0,0 +1,108 @@ +/* SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause */ +/* + * Copyright (C) STMicroelectronics 2018 - All Rights Reserved + * Author: Gabriel Fernandez for STMicroelectronics. + */ + +#ifndef _DT_BINDINGS_STM32MP1_RESET_H_ +#define _DT_BINDINGS_STM32MP1_RESET_H_ + +#define LTDC_R 3072 +#define DSI_R 3076 +#define DDRPERFM_R 3080 +#define USBPHY_R 3088 +#define SPI6_R 3136 +#define I2C4_R 3138 +#define I2C6_R 3139 +#define USART1_R 3140 +#define STGEN_R 3156 +#define GPIOZ_R 3200 +#define CRYP1_R 3204 +#define HASH1_R 3205 +#define RNG1_R 3206 +#define AXIM_R 3216 +#define GPU_R 3269 +#define ETHMAC_R 3274 +#define FMC_R 3276 +#define QSPI_R 3278 +#define SDMMC1_R 3280 +#define SDMMC2_R 3281 +#define CRC1_R 3284 +#define USBH_R 3288 +#define MDMA_R 3328 +#define MCU_R 8225 +#define TIM2_R 19456 +#define TIM3_R 19457 +#define TIM4_R 19458 +#define TIM5_R 19459 +#define TIM6_R 19460 +#define TIM7_R 19461 +#define TIM12_R 16462 +#define TIM13_R 16463 +#define TIM14_R 16464 +#define LPTIM1_R 19465 +#define SPI2_R 19467 +#define SPI3_R 19468 +#define USART2_R 19470 +#define USART3_R 19471 +#define UART4_R 19472 +#define UART5_R 19473 +#define UART7_R 19474 +#define UART8_R 19475 +#define I2C1_R 19477 +#define I2C2_R 19478 +#define I2C3_R 19479 +#define I2C5_R 19480 +#define SPDIF_R 19482 +#define CEC_R 19483 +#define DAC12_R 19485 +#define MDIO_R 19847 +#define TIM1_R 19520 +#define TIM8_R 19521 +#define TIM15_R 19522 +#define TIM16_R 19523 +#define TIM17_R 19524 +#define SPI1_R 19528 +#define SPI4_R 19529 +#define SPI5_R 19530 +#define USART6_R 19533 +#define SAI1_R 19536 +#define SAI2_R 19537 +#define SAI3_R 19538 +#define DFSDM_R 19540 +#define FDCAN_R 19544 +#define LPTIM2_R 19584 +#define LPTIM3_R 19585 +#define LPTIM4_R 19586 +#define LPTIM5_R 19587 +#define SAI4_R 19592 +#define SYSCFG_R 19595 +#define VREF_R 19597 +#define TMPSENS_R 19600 +#define PMBCTRL_R 19601 +#define DMA1_R 19648 +#define DMA2_R 19649 +#define DMAMUX_R 19650 +#define ADC12_R 19653 +#define USBO_R 19656 +#define SDMMC3_R 19664 +#define CAMITF_R 19712 +#define CRYP2_R 19716 +#define HASH2_R 19717 +#define RNG2_R 19718 +#define CRC2_R 19719 +#define HSEM_R 19723 +#define MBOX_R 19724 +#define GPIOA_R 19776 +#define GPIOB_R 19777 +#define GPIOC_R 19778 +#define GPIOD_R 19779 +#define GPIOE_R 19780 +#define GPIOF_R 19781 +#define GPIOG_R 19782 +#define GPIOH_R 19783 +#define GPIOI_R 19784 +#define GPIOJ_R 19785 +#define GPIOK_R 19786 + +#endif /* _DT_BINDINGS_STM32MP1_RESET_H_ */ -- 2.39.5