From 9344efc9bb7a28a1aca395d2762ca2d5dc128405 Mon Sep 17 00:00:00 2001 From: Sam Protsenko Date: Tue, 23 Jul 2024 13:14:38 -0500 Subject: [PATCH] rng: Add Exynos TRNG driver Add True Random Number Generator (TRNG) driver for Exynos chips. This implementation is heavily based on Linux kernel's counterpart [1]. It also follows upstream dt-bindings [2]. TRNG block is usually a part of SSS (Security Sub System) IP-core on Exynos chips. Because SSS access on Exynos850 is protected by TZPC (TrustZone Protection Control), it's not possible to read/write TRNG registers from U-Boot, as it's running in EL1 mode. Instead, the corresponding SMC calls should be used to make the secure software running in EL3 mode access it for us. Those SMC calls are handled by LDFW (Loadable Firmware), which has to be loaded first. For example, for E850-96 board it's done in its board_init(), so by the time RNG capabilities are needed the LDFW should be already loaded and TRNG should be functional. [1] drivers/char/hw_random/exynos-trng.c [2] dts/upstream/Bindings/rng/samsung,exynos5250-trng.yaml Signed-off-by: Sam Protsenko Signed-off-by: Minkyu Kang --- drivers/rng/Kconfig | 13 ++ drivers/rng/Makefile | 1 + drivers/rng/exynos-trng.c | 291 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 305 insertions(+) create mode 100644 drivers/rng/exynos-trng.c diff --git a/drivers/rng/Kconfig b/drivers/rng/Kconfig index 5758ae192a..b35d8c66b9 100644 --- a/drivers/rng/Kconfig +++ b/drivers/rng/Kconfig @@ -120,4 +120,17 @@ config RNG_TURRIS_RWTM on other Armada-3700 devices (like EspressoBin) if Secure Firmware from CZ.NIC is used. +config RNG_EXYNOS + bool "Samsung Exynos True Random Number Generator support" + depends on DM_RNG + help + Enable support for True Random Number Generator (TRNG) available on + Exynos SoCs. + + On some chips (like Exynos850) TRNG registers are protected with TZPC + (TrustZone Protection Control). For such chips the driver provides an + implementation based on SMC calls to EL3 monitor program. In that + case the LDFW (Loadable Firmware) has to be loaded first, as it + actually implements TRNG SMC calls. + endif diff --git a/drivers/rng/Makefile b/drivers/rng/Makefile index c1f1c616e0..30553c9d6e 100644 --- a/drivers/rng/Makefile +++ b/drivers/rng/Makefile @@ -18,3 +18,4 @@ obj-$(CONFIG_RNG_ARM_RNDR) += arm_rndr.o obj-$(CONFIG_TPM_RNG) += tpm_rng.o obj-$(CONFIG_RNG_JH7110) += jh7110_rng.o obj-$(CONFIG_RNG_TURRIS_RWTM) += turris_rwtm_rng.o +obj-$(CONFIG_RNG_EXYNOS) += exynos-trng.o diff --git a/drivers/rng/exynos-trng.c b/drivers/rng/exynos-trng.c new file mode 100644 index 0000000000..d2479d244e --- /dev/null +++ b/drivers/rng/exynos-trng.c @@ -0,0 +1,291 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2024 Linaro Ltd. + * Author: Sam Protsenko + * + * Samsung Exynos TRNG driver (True Random Number Generator). + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define EXYNOS_TRNG_CLKDIV 0x0 +#define EXYNOS_TRNG_CLKDIV_MASK GENMASK(15, 0) +#define EXYNOS_TRNG_CLOCK_RATE 500000 + +#define EXYNOS_TRNG_CTRL 0x20 +#define EXYNOS_TRNG_CTRL_RNGEN BIT(31) + +#define EXYNOS_TRNG_POST_CTRL 0x30 +#define EXYNOS_TRNG_ONLINE_CTRL 0x40 +#define EXYNOS_TRNG_ONLINE_STAT 0x44 +#define EXYNOS_TRNG_ONLINE_MAXCHI2 0x48 +#define EXYNOS_TRNG_FIFO_CTRL 0x50 +#define EXYNOS_TRNG_FIFO_0 0x80 +#define EXYNOS_TRNG_FIFO_1 0x84 +#define EXYNOS_TRNG_FIFO_2 0x88 +#define EXYNOS_TRNG_FIFO_3 0x8c +#define EXYNOS_TRNG_FIFO_4 0x90 +#define EXYNOS_TRNG_FIFO_5 0x94 +#define EXYNOS_TRNG_FIFO_6 0x98 +#define EXYNOS_TRNG_FIFO_7 0x9c +#define EXYNOS_TRNG_FIFO_LEN 8 +#define EXYNOS_TRNG_FIFO_TIMEOUT (1 * USEC_PER_SEC) + +#define EXYNOS_SMC_CALL_VAL(func_num) \ + ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, \ + ARM_SMCCC_SMC_32, \ + ARM_SMCCC_OWNER_SIP, \ + func_num) + +/* SMC command for DTRNG access */ +#define SMC_CMD_RANDOM EXYNOS_SMC_CALL_VAL(0x1012) + +/* SMC_CMD_RANDOM: arguments */ +#define HWRNG_INIT 0x0 +#define HWRNG_EXIT 0x1 +#define HWRNG_GET_DATA 0x2 + +/* SMC_CMD_RANDOM: return values */ +#define HWRNG_RET_OK 0x0 +#define HWRNG_RET_RETRY_ERROR 0x2 + +#define HWRNG_MAX_TRIES 100 + +/** + * struct exynos_trng_variant - Chip specific data + * + * @smc: Set "true" if TRNG block has to be accessed via SMC calls + * @init: (Optional) TRNG initialization function to call on probe + * @exit: (Optional) TRNG deinitialization function to call on remove + * @read: Function to read the random data from TRNG block + */ +struct exynos_trng_variant { + bool smc; + int (*init)(struct udevice *dev); + void (*exit)(struct udevice *dev); + int (*read)(struct udevice *dev, void *data, size_t len); +}; + +/** + * struct exynos_trng_priv - Driver's private data + * + * @base: Base address of MMIO registers of TRNG block + * @clk: Operating clock (needed for TRNG block functioning) + * @pclk: Bus clock (needed for interfacing the TRNG block registers) + * @data: Chip specific data + */ +struct exynos_trng_priv { + void __iomem *base; + struct clk *clk; + struct clk *pclk; + const struct exynos_trng_variant *data; +}; + +static int exynos_trng_read_reg(struct udevice *dev, void *data, size_t len) +{ + struct exynos_trng_priv *trng = dev_get_priv(dev); + int val; + + len = min_t(size_t, len, EXYNOS_TRNG_FIFO_LEN * 4); + writel_relaxed(len * 8, trng->base + EXYNOS_TRNG_FIFO_CTRL); + val = readl_poll_timeout(trng->base + EXYNOS_TRNG_FIFO_CTRL, val, + val == 0, EXYNOS_TRNG_FIFO_TIMEOUT); + if (val < 0) + return val; + + memcpy_fromio(data, trng->base + EXYNOS_TRNG_FIFO_0, len); + + return 0; +} + +static int exynos_trng_read_smc(struct udevice *dev, void *data, size_t len) +{ + struct arm_smccc_res res; + unsigned int copied = 0; + u32 *buf = data; + int tries = 0; + + while (copied < len) { + arm_smccc_smc(SMC_CMD_RANDOM, HWRNG_GET_DATA, 0, 0, 0, 0, 0, 0, + &res); + switch (res.a0) { + case HWRNG_RET_OK: + *buf++ = res.a2; + *buf++ = res.a3; + copied += 8; + tries = 0; + break; + case HWRNG_RET_RETRY_ERROR: + if (++tries >= HWRNG_MAX_TRIES) + return -EIO; + udelay(10); + break; + default: + return -EIO; + } + } + + return 0; +} + +static int exynos_trng_init_reg(struct udevice *dev) +{ + const u32 max_div = EXYNOS_TRNG_CLKDIV_MASK; + struct exynos_trng_priv *trng = dev_get_priv(dev); + unsigned long sss_rate; + u32 div; + + sss_rate = clk_get_rate(trng->clk); + + /* + * For most TRNG circuits the clock frequency of under 500 kHz is safe. + * The clock divider should be an even number. + */ + div = sss_rate / EXYNOS_TRNG_CLOCK_RATE; + div -= div % 2; /* make sure it's even */ + if (div > max_div) { + dev_err(dev, "Clock divider too large: %u", div); + return -ERANGE; + } + writel_relaxed(div, trng->base + EXYNOS_TRNG_CLKDIV); + + /* Enable the generator */ + writel_relaxed(EXYNOS_TRNG_CTRL_RNGEN, trng->base + EXYNOS_TRNG_CTRL); + + /* Disable post-processing */ + writel_relaxed(0, trng->base + EXYNOS_TRNG_POST_CTRL); + + return 0; +} + +static int exynos_trng_init_smc(struct udevice *dev) +{ + struct arm_smccc_res res; + int ret = 0; + + arm_smccc_smc(SMC_CMD_RANDOM, HWRNG_INIT, 0, 0, 0, 0, 0, 0, &res); + if (res.a0 != HWRNG_RET_OK) { + dev_err(dev, "SMC command for TRNG init failed (%d)\n", + (int)res.a0); + ret = -EIO; + } + if ((int)res.a0 == -1) + dev_info(dev, "Make sure LDFW is loaded\n"); + + return ret; +} + +static void exynos_trng_exit_smc(struct udevice *dev) +{ + struct arm_smccc_res res; + + arm_smccc_smc(SMC_CMD_RANDOM, HWRNG_EXIT, 0, 0, 0, 0, 0, 0, &res); +} + +static int exynos_trng_read(struct udevice *dev, void *data, size_t len) +{ + struct exynos_trng_priv *trng = dev_get_priv(dev); + + return trng->data->read(dev, data, len); +} + +static int exynos_trng_of_to_plat(struct udevice *dev) +{ + struct exynos_trng_priv *trng = dev_get_priv(dev); + + trng->data = (struct exynos_trng_variant *)dev_get_driver_data(dev); + if (!trng->data->smc) { + trng->base = dev_read_addr_ptr(dev); + if (!trng->base) + return -EINVAL; + } + + trng->clk = devm_clk_get(dev, "secss"); + if (IS_ERR(trng->clk)) + return PTR_ERR(trng->clk); + + trng->pclk = devm_clk_get_optional(dev, "pclk"); + if (IS_ERR(trng->pclk)) + return PTR_ERR(trng->pclk); + + return 0; +} + +static int exynos_trng_probe(struct udevice *dev) +{ + struct exynos_trng_priv *trng = dev_get_priv(dev); + int ret; + + ret = clk_enable(trng->pclk); + if (ret) + return ret; + + ret = clk_enable(trng->clk); + if (ret) + return ret; + + if (trng->data->init) + ret = trng->data->init(dev); + + return ret; +} + +static int exynos_trng_remove(struct udevice *dev) +{ + struct exynos_trng_priv *trng = dev_get_priv(dev); + + if (trng->data->exit) + trng->data->exit(dev); + + /* Keep SSS clocks enabled, they are needed for EL3_MON and kernel */ + + return 0; +} + +static const struct dm_rng_ops exynos_trng_ops = { + .read = exynos_trng_read, +}; + +static const struct exynos_trng_variant exynos5250_trng_data = { + .init = exynos_trng_init_reg, + .read = exynos_trng_read_reg, +}; + +static const struct exynos_trng_variant exynos850_trng_data = { + .smc = true, + .init = exynos_trng_init_smc, + .exit = exynos_trng_exit_smc, + .read = exynos_trng_read_smc, +}; + +static const struct udevice_id exynos_trng_match[] = { + { + .compatible = "samsung,exynos5250-trng", + .data = (ulong)&exynos5250_trng_data, + }, { + .compatible = "samsung,exynos850-trng", + .data = (ulong)&exynos850_trng_data, + }, + { }, +}; + +U_BOOT_DRIVER(exynos_trng) = { + .name = "exynos-trng", + .id = UCLASS_RNG, + .of_match = exynos_trng_match, + .of_to_plat = exynos_trng_of_to_plat, + .probe = exynos_trng_probe, + .remove = exynos_trng_remove, + .ops = &exynos_trng_ops, + .priv_auto = sizeof(struct exynos_trng_priv), +}; -- 2.39.5