From 807f0ff68a9afe9667745d18e647e5ef2231520f Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Tue, 26 May 2020 13:34:26 +0530 Subject: [PATCH] spi: davinci: Drop non-dm code Now all boards which are using davinci SPI driver have moved to SPL_DM so drop the unneeded non-dm code. Cc: Adam Ford Signed-off-by: Jagan Teki Tested-by: Adam Ford #da850-evm --- drivers/spi/Kconfig | 12 +- drivers/spi/davinci_spi.c | 157 --------------------------- include/configs/ti_armv7_keystone2.h | 9 -- 3 files changed, 6 insertions(+), 172 deletions(-) diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index d32858bedf..09b9cb17d8 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -119,6 +119,12 @@ config CF_SPI Enable the ColdFire SPI driver. This driver can be used on some m68k SoCs. +config DAVINCI_SPI + bool "Davinci & Keystone SPI driver" + depends on ARCH_DAVINCI || ARCH_KEYSTONE + help + Enable the Davinci SPI driver + config DESIGNWARE_SPI bool "Designware SPI driver" help @@ -405,12 +411,6 @@ config FSL_ESPI access the SPI interface and SPI NOR flash on platforms embedding this Freescale eSPI IP core. -config DAVINCI_SPI - bool "Davinci & Keystone SPI driver" - depends on ARCH_DAVINCI || ARCH_KEYSTONE - help - Enable the Davinci SPI driver - config SH_QSPI bool "Renesas Quad SPI driver" help diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c index 97ac97b1a5..e1e9b45cc9 100644 --- a/drivers/spi/davinci_spi.c +++ b/drivers/spi/davinci_spi.c @@ -55,41 +55,6 @@ /* SPIDEF */ #define SPIDEF_CSDEF0_MASK BIT(0) -#ifndef CONFIG_DM_SPI -#define SPI0_BUS 0 -#define SPI0_BASE CONFIG_SYS_SPI_BASE -/* - * Define default SPI0_NUM_CS as 1 for existing platforms that uses this - * driver. Platform can configure number of CS using CONFIG_SYS_SPI0_NUM_CS - * if more than one CS is supported and by defining CONFIG_SYS_SPI0. - */ -#ifndef CONFIG_SYS_SPI0 -#define SPI0_NUM_CS 1 -#else -#define SPI0_NUM_CS CONFIG_SYS_SPI0_NUM_CS -#endif - -/* - * define CONFIG_SYS_SPI1 when platform has spi-1 device (bus #1) and - * CONFIG_SYS_SPI1_NUM_CS defines number of CS on this bus - */ -#ifdef CONFIG_SYS_SPI1 -#define SPI1_BUS 1 -#define SPI1_NUM_CS CONFIG_SYS_SPI1_NUM_CS -#define SPI1_BASE CONFIG_SYS_SPI1_BASE -#endif - -/* - * define CONFIG_SYS_SPI2 when platform has spi-2 device (bus #2) and - * CONFIG_SYS_SPI2_NUM_CS defines number of CS on this bus - */ -#ifdef CONFIG_SYS_SPI2 -#define SPI2_BUS 2 -#define SPI2_NUM_CS CONFIG_SYS_SPI2_NUM_CS -#define SPI2_BASE CONFIG_SYS_SPI2_BASE -#endif -#endif - DECLARE_GLOBAL_DATA_PTR; /* davinci spi register set */ @@ -122,9 +87,6 @@ struct davinci_spi_regs { /* davinci spi slave */ struct davinci_spi_slave { -#ifndef CONFIG_DM_SPI - struct spi_slave slave; -#endif struct davinci_spi_regs *regs; unsigned int freq; /* current SPI bus frequency */ unsigned int mode; /* current SPI mode used */ @@ -346,124 +308,6 @@ out: return 0; } -#ifndef CONFIG_DM_SPI - -static inline struct davinci_spi_slave *to_davinci_spi(struct spi_slave *slave) -{ - return container_of(slave, struct davinci_spi_slave, slave); -} - -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{ - int ret = 0; - - switch (bus) { - case SPI0_BUS: - if (cs < SPI0_NUM_CS) - ret = 1; - break; -#ifdef CONFIG_SYS_SPI1 - case SPI1_BUS: - if (cs < SPI1_NUM_CS) - ret = 1; - break; -#endif -#ifdef CONFIG_SYS_SPI2 - case SPI2_BUS: - if (cs < SPI2_NUM_CS) - ret = 1; - break; -#endif - default: - /* Invalid bus number. Do nothing */ - break; - } - return ret; -} - -void spi_cs_activate(struct spi_slave *slave) -{ - /* do nothing */ -} - -void spi_cs_deactivate(struct spi_slave *slave) -{ - /* do nothing */ -} - -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, - unsigned int max_hz, unsigned int mode) -{ - struct davinci_spi_slave *ds; - - if (!spi_cs_is_valid(bus, cs)) - return NULL; - - ds = spi_alloc_slave(struct davinci_spi_slave, bus, cs); - if (!ds) - return NULL; - - switch (bus) { - case SPI0_BUS: - ds->regs = (struct davinci_spi_regs *)SPI0_BASE; - break; -#ifdef CONFIG_SYS_SPI1 - case SPI1_BUS: - ds->regs = (struct davinci_spi_regs *)SPI1_BASE; - break; -#endif -#ifdef CONFIG_SYS_SPI2 - case SPI2_BUS: - ds->regs = (struct davinci_spi_regs *)SPI2_BASE; - break; -#endif - default: /* Invalid bus number */ - return NULL; - } - - ds->freq = max_hz; - ds->mode = mode; - - return &ds->slave; -} - -void spi_free_slave(struct spi_slave *slave) -{ - struct davinci_spi_slave *ds = to_davinci_spi(slave); - - free(ds); -} - -int spi_xfer(struct spi_slave *slave, unsigned int bitlen, - const void *dout, void *din, unsigned long flags) -{ - struct davinci_spi_slave *ds = to_davinci_spi(slave); - - ds->cur_cs = slave->cs; - - return __davinci_spi_xfer(ds, bitlen, dout, din, flags); -} - -int spi_claim_bus(struct spi_slave *slave) -{ - struct davinci_spi_slave *ds = to_davinci_spi(slave); - -#ifdef CONFIG_SPI_HALF_DUPLEX - ds->half_duplex = true; -#else - ds->half_duplex = false; -#endif - return __davinci_spi_claim_bus(ds, ds->slave.cs); -} - -void spi_release_bus(struct spi_slave *slave) -{ - struct davinci_spi_slave *ds = to_davinci_spi(slave); - - __davinci_spi_release_bus(ds); -} - -#else static int davinci_spi_set_speed(struct udevice *bus, uint max_hz) { struct davinci_spi_slave *ds = dev_get_priv(bus); @@ -582,4 +426,3 @@ U_BOOT_DRIVER(davinci_spi) = { .ops = &davinci_spi_ops, .priv_auto_alloc_size = sizeof(struct davinci_spi_slave), }; -#endif diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h index 37210b2605..b632ae010d 100644 --- a/include/configs/ti_armv7_keystone2.h +++ b/include/configs/ti_armv7_keystone2.h @@ -64,15 +64,6 @@ /* SPI Configuration */ #define CONFIG_SYS_SPI_CLK ks_clk_get_rate(KS2_CLK1_6) -#define CONFIG_SYS_SPI0 -#define CONFIG_SYS_SPI_BASE KS2_SPI0_BASE -#define CONFIG_SYS_SPI0_NUM_CS 4 -#define CONFIG_SYS_SPI1 -#define CONFIG_SYS_SPI1_BASE KS2_SPI1_BASE -#define CONFIG_SYS_SPI1_NUM_CS 4 -#define CONFIG_SYS_SPI2 -#define CONFIG_SYS_SPI2_BASE KS2_SPI2_BASE -#define CONFIG_SYS_SPI2_NUM_CS 4 /* Network Configuration */ #define CONFIG_BOOTP_DEFAULT -- 2.39.5