From 7906f91789de1f0ceed87d53a39ca2d7ca80150c Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sun, 4 Dec 2022 10:13:25 -0500 Subject: [PATCH] global: Migrate CONFIG_PCIE_IMX_PERST_GPIO to CFG Perform a simple rename of CONFIG_PCIE_IMX_PERST_GPIO to CFG_PCIE_IMX_PERST_GPIO Signed-off-by: Tom Rini --- drivers/pci/pcie_imx.c | 12 ++++++------ include/configs/mx6sabresd.h | 2 +- include/configs/mx6sxsabresd.h | 2 +- include/configs/novena.h | 2 +- include/configs/tbs2910.h | 2 +- include/configs/vining_2000.h | 2 +- 6 files changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/pci/pcie_imx.c b/drivers/pci/pcie_imx.c index 46ac01713f..902507aaae 100644 --- a/drivers/pci/pcie_imx.c +++ b/drivers/pci/pcie_imx.c @@ -566,7 +566,7 @@ int imx6_pcie_toggle_reset(struct gpio_desc *gpio, bool active_high) * do self-initialisation. * * In case your #PERST pin is connected to a plain GPIO pin of the - * CPU, you can define CONFIG_PCIE_IMX_PERST_GPIO in your board's + * CPU, you can define CFG_PCIE_IMX_PERST_GPIO in your board's * configuration file and the condition below will handle the rest * of the reset toggling. * @@ -578,13 +578,13 @@ int imx6_pcie_toggle_reset(struct gpio_desc *gpio, bool active_high) * Linux at all in the first place since it's in some non-reset * state due to being previously used in U-Boot. */ -#ifdef CONFIG_PCIE_IMX_PERST_GPIO - gpio_request(CONFIG_PCIE_IMX_PERST_GPIO, "pcie_reset"); - gpio_direction_output(CONFIG_PCIE_IMX_PERST_GPIO, 0); +#ifdef CFG_PCIE_IMX_PERST_GPIO + gpio_request(CFG_PCIE_IMX_PERST_GPIO, "pcie_reset"); + gpio_direction_output(CFG_PCIE_IMX_PERST_GPIO, 0); mdelay(20); - gpio_set_value(CONFIG_PCIE_IMX_PERST_GPIO, 1); + gpio_set_value(CFG_PCIE_IMX_PERST_GPIO, 1); mdelay(20); - gpio_free(CONFIG_PCIE_IMX_PERST_GPIO); + gpio_free(CFG_PCIE_IMX_PERST_GPIO); #else if (dm_gpio_is_valid(gpio)) { /* Assert PERST# for 20ms then de-assert */ diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h index 2b028e3aa2..116a9c6abc 100644 --- a/include/configs/mx6sabresd.h +++ b/include/configs/mx6sabresd.h @@ -20,7 +20,7 @@ #define CFG_SYS_FSL_USDHC_NUM 3 #ifdef CONFIG_CMD_PCI -#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12) +#define CFG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12) #define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(3, 19) #endif diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index 8b02c3b631..85e5cfbb58 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -123,7 +123,7 @@ #endif #ifdef CONFIG_CMD_PCI -#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(2, 0) +#define CFG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(2, 0) #define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(2, 1) #endif diff --git a/include/configs/novena.h b/include/configs/novena.h index dc5b043129..6f4353e7df 100644 --- a/include/configs/novena.h +++ b/include/configs/novena.h @@ -41,7 +41,7 @@ /* PCI express */ #ifdef CONFIG_CMD_PCI -#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(3, 29) +#define CFG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(3, 29) #define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(7, 12) #endif diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index 535859792d..256331ae17 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -22,7 +22,7 @@ /* PCI */ #ifdef CONFIG_CMD_PCI -#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12) +#define CFG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12) #endif /* USB */ diff --git a/include/configs/vining_2000.h b/include/configs/vining_2000.h index 6db68c1e70..7bfc22c043 100644 --- a/include/configs/vining_2000.h +++ b/include/configs/vining_2000.h @@ -40,7 +40,7 @@ #define CFG_MXC_USB_FLAGS 0 #ifdef CONFIG_CMD_PCI -#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(4, 6) +#define CFG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(4, 6) #endif #define CFG_IMX6_PWM_PER_CLK 66000000 -- 2.39.5