From 75cd09cb18592896abf91bc7530ea28f6b17ec77 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 5 Feb 2019 10:43:26 -0200 Subject: [PATCH] imx8qxp: Fix the reported CPU frequency Currently the CPU frequency is incorrectly reported: CPU: NXP i.MX8QXP RevB A35 at 147228 MHz Fix this problem by using a direct call to the SCU firmware to retrieve the Cortex A35 CPU frequency. With this change applied the CPU frequency is displayed correctly: CPU: NXP i.MX8QXP RevB A35 at 1200 MHz Tested-by: Marcelo Macedo Signed-off-by: Fabio Estevam Tested-by: Andrejs Cainikovs --- arch/arm/mach-imx/imx8/cpu.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) diff --git a/arch/arm/mach-imx/imx8/cpu.c b/arch/arm/mach-imx/imx8/cpu.c index 7539e45652..4bbc956f9d 100644 --- a/arch/arm/mach-imx/imx8/cpu.c +++ b/arch/arm/mach-imx/imx8/cpu.c @@ -616,26 +616,32 @@ static const struct udevice_id cpu_imx8_ids[] = { { } }; +static ulong imx8_get_cpu_rate(void) +{ + ulong rate; + int ret; + + ret = sc_pm_get_clock_rate(-1, SC_R_A35, SC_PM_CLK_CPU, + (sc_pm_clock_rate_t *)&rate); + if (ret) { + printf("Could not read CPU frequency: %d\n", ret); + return 0; + } + + return rate; +} + static int imx8_cpu_probe(struct udevice *dev) { struct cpu_imx_platdata *plat = dev_get_platdata(dev); - struct clk cpu_clk; u32 cpurev; - int ret; cpurev = get_cpu_rev(); plat->cpurev = cpurev; plat->name = get_core_name(); plat->rev = get_imx8_rev(cpurev & 0xFFF); plat->type = get_imx8_type((cpurev & 0xFF000) >> 12); - - ret = clk_get_by_index(dev, 0, &cpu_clk); - if (ret) { - debug("%s: Failed to get CPU clk: %d\n", __func__, ret); - return 0; - } - - plat->freq_mhz = clk_get_rate(&cpu_clk) / 1000000; + plat->freq_mhz = imx8_get_cpu_rate() / 1000000; return 0; } -- 2.39.5