From 7469befcd5d860ed584c4c73dc2ac59cb72c3a71 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 22 Sep 2023 12:35:37 +0200 Subject: [PATCH] arm64: xilinx: Remove address/size-cells from gem nodes Some boards are using one mdio bus which holds multiple phys and also boards are using mdio node for bus description. That's why there are cases where address/size-cells are unnecessary which is also reported by make W=1 dtbs. That's why remove them from zynqmp.dtsi and let board DTSes to handle it based on used description. Error log: /axi/ethernet@ff0e0000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/02f308c774d4f2a798a9a8c066824114a19841a7.1695378830.git.michal.simek@amd.com --- arch/arm/dts/zynqmp.dtsi | 8 -------- 1 file changed, 8 deletions(-) diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi index c0e2654cc3..c77718fa7c 100644 --- a/arch/arm/dts/zynqmp.dtsi +++ b/arch/arm/dts/zynqmp.dtsi @@ -603,8 +603,6 @@ ; reg = <0x0 0xff0b0000 0x0 0x1000>; clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; - #address-cells = <1>; - #size-cells = <0>; iommus = <&smmu 0x874>; power-domains = <&zynqmp_firmware PD_ETH_0>; resets = <&zynqmp_reset ZYNQMP_RESET_GEM0>; @@ -619,8 +617,6 @@ ; reg = <0x0 0xff0c0000 0x0 0x1000>; clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; - #address-cells = <1>; - #size-cells = <0>; iommus = <&smmu 0x875>; power-domains = <&zynqmp_firmware PD_ETH_1>; resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>; @@ -635,8 +631,6 @@ ; reg = <0x0 0xff0d0000 0x0 0x1000>; clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; - #address-cells = <1>; - #size-cells = <0>; iommus = <&smmu 0x876>; power-domains = <&zynqmp_firmware PD_ETH_2>; resets = <&zynqmp_reset ZYNQMP_RESET_GEM2>; @@ -651,8 +645,6 @@ ; reg = <0x0 0xff0e0000 0x0 0x1000>; clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; - #address-cells = <1>; - #size-cells = <0>; iommus = <&smmu 0x877>; power-domains = <&zynqmp_firmware PD_ETH_3>; resets = <&zynqmp_reset ZYNQMP_RESET_GEM3>; -- 2.39.5