From 70487ff386c0b7ee40b83aff219f8b36829e8b13 Mon Sep 17 00:00:00 2001 From: Ye Li Date: Sun, 3 May 2020 22:19:52 +0800 Subject: [PATCH] imx8mm: Load fuse for TMU TCALIV and TASR On iMX8MM, the default value of TMU registers TCALIV and TASR need be loaded from fuse. HW won't do this, it expect SW loads them before using TMU. Reviewed-by: Bai Ping Signed-off-by: Ye Li Signed-off-by: Peng Fan --- arch/arm/mach-imx/imx8m/soc.c | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c index 89229da3b6..dcec83e624 100644 --- a/arch/arm/mach-imx/imx8m/soc.c +++ b/arch/arm/mach-imx/imx8m/soc.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Copyright 2017 NXP + * Copyright 2017-2019 NXP * * Peng Fan */ @@ -448,3 +448,29 @@ int arch_misc_init(void) return 0; } #endif + +void imx_tmu_arch_init(void *reg_base) +{ + if (is_imx8mm()) { + /* Load TCALIV and TASR from fuses */ + struct ocotp_regs *ocotp = + (struct ocotp_regs *)OCOTP_BASE_ADDR; + struct fuse_bank *bank = &ocotp->bank[3]; + struct fuse_bank3_regs *fuse = + (struct fuse_bank3_regs *)bank->fuse_regs; + + u32 tca_rt, tca_hr, tca_en; + u32 buf_vref, buf_slope; + + tca_rt = fuse->ana0 & 0xFF; + tca_hr = (fuse->ana0 & 0xFF00) >> 8; + tca_en = (fuse->ana0 & 0x2000000) >> 25; + + buf_vref = (fuse->ana0 & 0x1F00000) >> 20; + buf_slope = (fuse->ana0 & 0xF0000) >> 16; + + writel(buf_vref | (buf_slope << 16), (ulong)reg_base + 0x28); + writel((tca_en << 31) | (tca_hr << 16) | tca_rt, + (ulong)reg_base + 0x30); + } +} -- 2.39.5