From 7024755bd79b141b5ca8f3ba9b77627fd447767c Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Wed, 27 Apr 2022 15:31:29 -0500 Subject: [PATCH] ARM: dts: sun8i: R40/T3: Sync from Linux v5.18-rc1 Copy the devicetree for the R40/T3 SoC verbatim from the Linux v5.18-rc1 tag. None of the existing boards had any devicetree updates. This commit adds the following new board devicetrees: - sun8i-r40-oka40i-c.dts - sun8i-t3-cqa3t-bv3.dts Signed-off-by: Samuel Holland --- arch/arm/dts/Makefile | 2 + arch/arm/dts/sun8i-r40-feta40i.dtsi | 106 +++++++++++++ arch/arm/dts/sun8i-r40-oka40i-c.dts | 203 +++++++++++++++++++++++++ arch/arm/dts/sun8i-r40.dtsi | 118 ++++++++++++++- arch/arm/dts/sun8i-t3-cqa3t-bv3.dts | 226 ++++++++++++++++++++++++++++ 5 files changed, 653 insertions(+), 2 deletions(-) create mode 100644 arch/arm/dts/sun8i-r40-feta40i.dtsi create mode 100644 arch/arm/dts/sun8i-r40-oka40i-c.dts create mode 100644 arch/arm/dts/sun8i-t3-cqa3t-bv3.dts diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index e0f856b419..c610025544 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -667,6 +667,8 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \ sun8i-h3-zeropi.dtb dtb-$(CONFIG_MACH_SUN8I_R40) += \ sun8i-r40-bananapi-m2-ultra.dtb \ + sun8i-r40-oka40i-c.dtb \ + sun8i-t3-cqa3t-bv3.dtb \ sun8i-v40-bananapi-m2-berry.dtb dtb-$(CONFIG_MACH_SUN8I_V3S) += \ sun8i-s3-elimo-initium.dtb \ diff --git a/arch/arm/dts/sun8i-r40-feta40i.dtsi b/arch/arm/dts/sun8i-r40-feta40i.dtsi new file mode 100644 index 0000000000..265e0fa57a --- /dev/null +++ b/arch/arm/dts/sun8i-r40-feta40i.dtsi @@ -0,0 +1,106 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// Copyright (C) 2021 Ivan Uvarov +// Based on the sun8i-r40-bananapi-m2-ultra.dts, which is: +// Copyright (C) 2017 Chen-Yu Tsai +// Copyright (C) 2017 Icenowy Zheng + +#include "sun8i-r40.dtsi" + +&i2c0 { + status = "okay"; + + axp22x: pmic@34 { + compatible = "x-powers,axp221"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp22x.dtsi" + +&mmc2 { + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_aldo2>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&pio { + pinctrl-names = "default"; + pinctrl-0 = <&clk_out_a_pin>; + vcc-pa-supply = <®_dcdc1>; + vcc-pc-supply = <®_aldo2>; + vcc-pd-supply = <®_dcdc1>; + vcc-pf-supply = <®_dldo4>; + vcc-pg-supply = <®_dldo1>; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pa"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-io"; +}; + +®_dldo4 { + regulator-always-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vdd2v5-sata"; +}; + +®_eldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd1v2-sata"; +}; + +®_eldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc-pe"; +}; diff --git a/arch/arm/dts/sun8i-r40-oka40i-c.dts b/arch/arm/dts/sun8i-r40-oka40i-c.dts new file mode 100644 index 0000000000..0bd1336206 --- /dev/null +++ b/arch/arm/dts/sun8i-r40-oka40i-c.dts @@ -0,0 +1,203 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// Copyright (C) 2021 Ivan Uvarov +// Based on the sun8i-r40-bananapi-m2-ultra.dts, which is: +// Copyright (C) 2017 Chen-Yu Tsai +// Copyright (C) 2017 Icenowy Zheng + +/dts-v1/; +#include "sun8i-r40-feta40i.dtsi" + +#include +#include + +/ { + model = "Forlinx OKA40i-C"; + compatible = "forlinx,oka40i-c", "forlinx,feta40i-c", "allwinner,sun8i-r40"; + + aliases { + ethernet0 = &gmac; + serial0 = &uart0; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; /* RS485 */ + serial7 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-5 { /* this is how the leds are labeled on the board */ + gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */ + color = ; + function = LED_FUNCTION_STATUS; + }; + + led-6 { + gpios = <&pio 8 15 GPIO_ACTIVE_LOW>; /* PI15 */ + color = ; + function = LED_FUNCTION_STATUS; + }; + }; + + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; // PB10 WIFI_EN + clocks = <&ccu CLK_OUTA>; + clock-names = "ext_clock"; + }; +}; + +&ahci { + ahci-supply = <®_dldo4>; + phy-supply = <®_eldo2>; + status = "okay"; +}; + +&de { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_rgmii_pins>; + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + phy-supply = <®_dcdc1>; + status = "okay"; +}; + +&gmac_mdio { + phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 8 11 GPIO_ACTIVE_LOW>; // PI11 + status = "okay"; +}; + +&mmc3 { + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 8 10 GPIO_ACTIVE_LOW>; // PI10 + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +®_dc1sw { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-lcd"; +}; + +®_dldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +&tcon_tv0 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pi_pins>, <&uart2_rts_cts_pi_pins>; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>; + uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pg_pins>; + status = "okay"; +}; + +&uart5 { /* RS485 */ + pinctrl-names = "default"; + pinctrl-0 = <&uart5_ph_pins>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pi_pins>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_vcc5v0>; + usb2_vbus-supply = <®_vcc5v0>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun8i-r40.dtsi b/arch/arm/dts/sun8i-r40.dtsi index d5ad3b9efd..03d3e5f45a 100644 --- a/arch/arm/dts/sun8i-r40.dtsi +++ b/arch/arm/dts/sun8i-r40.dtsi @@ -357,6 +357,8 @@ clock-names = "ahb", "mmc"; resets = <&ccu RST_BUS_MMC3>; reset-names = "ahb"; + pinctrl-0 = <&mmc3_pins>; + pinctrl-names = "default"; interrupts = ; status = "disabled"; #address-cells = <1>; @@ -509,6 +511,16 @@ #interrupt-cells = <3>; #gpio-cells = <3>; + can_ph_pins: can-ph-pins { + pins = "PH20", "PH21"; + function = "can"; + }; + + can_pa_pins: can-pa-pins { + pins = "PA16", "PA17"; + function = "can"; + }; + clk_out_a_pin: clk-out-a-pin { pins = "PI12"; function = "clk_out_a"; @@ -601,6 +613,15 @@ bias-pull-up; }; + /omit-if-no-ref/ + mmc3_pins: mmc3-pins { + pins = "PI4", "PI5", "PI6", + "PI7", "PI8", "PI9"; + function = "mmc3"; + drive-strength = <30>; + bias-pull-up; + }; + /omit-if-no-ref/ spi0_pc_pins: spi0-pc-pins { pins = "PC0", "PC1", "PC2"; @@ -631,20 +652,65 @@ function = "spi1"; }; + /omit-if-no-ref/ uart0_pb_pins: uart0-pb-pins { pins = "PB22", "PB23"; function = "uart0"; }; + /omit-if-no-ref/ + uart2_pi_pins: uart2-pi-pins { + pins = "PI18", "PI19"; + function = "uart2"; + }; + + /omit-if-no-ref/ + uart2_rts_cts_pi_pins: uart2-rts-cts-pi-pins{ + pins = "PI16", "PI17"; + function = "uart2"; + }; + + /omit-if-no-ref/ uart3_pg_pins: uart3-pg-pins { pins = "PG6", "PG7"; function = "uart3"; }; + /omit-if-no-ref/ uart3_rts_cts_pg_pins: uart3-rts-cts-pg-pins { pins = "PG8", "PG9"; function = "uart3"; }; + + /omit-if-no-ref/ + uart4_pg_pins: uart4-pg-pins { + pins = "PG10", "PG11"; + function = "uart4"; + }; + + /omit-if-no-ref/ + uart5_ph_pins: uart5-ph-pins { + pins = "PH6", "PH7"; + function = "uart5"; + }; + + /omit-if-no-ref/ + uart7_pi_pins: uart7-pi-pins { + pins = "PI20", "PI21"; + function = "uart7"; + }; + }; + + timer@1c20c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0x90>; + interrupts = , + , + , + , + , + ; + clocks = <&osc24M>; }; wdt: watchdog@1c20c90 { @@ -680,6 +746,45 @@ status = "disabled"; }; + i2s0: i2s@1c22000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-r40-i2s", + "allwinner,sun8i-h3-i2s"; + reg = <0x01c22000 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>; + clock-names = "apb", "mod"; + resets = <&ccu RST_BUS_I2S0>; + dmas = <&dma 3>, <&dma 3>; + dma-names = "rx", "tx"; + }; + + i2s1: i2s@1c22400 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-r40-i2s", + "allwinner,sun8i-h3-i2s"; + reg = <0x01c22400 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>; + clock-names = "apb", "mod"; + resets = <&ccu RST_BUS_I2S1>; + dmas = <&dma 4>, <&dma 4>; + dma-names = "rx", "tx"; + }; + + i2s2: i2s@1c22800 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-r40-i2s", + "allwinner,sun8i-h3-i2s"; + reg = <0x01c22800 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>; + clock-names = "apb", "mod"; + resets = <&ccu RST_BUS_I2S2>; + dmas = <&dma 6>, <&dma 6>; + dma-names = "rx", "tx"; + }; + ths: thermal-sensor@1c24c00 { compatible = "allwinner,sun8i-r40-ths"; reg = <0x01c24c00 0x100>; @@ -831,6 +936,15 @@ #size-cells = <0>; }; + can0: can@1c2bc00 { + compatible = "allwinner,sun8i-r40-can"; + reg = <0x01c2bc00 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_CAN>; + resets = <&ccu RST_BUS_CAN>; + status = "disabled"; + }; + i2c4: i2c@1c2c000 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2c000 0x400>; @@ -1117,8 +1231,8 @@ reg-io-width = <1>; interrupts = ; clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>, - <&ccu CLK_HDMI>; - clock-names = "iahb", "isfr", "tmds"; + <&ccu CLK_HDMI>, <&rtc 0>; + clock-names = "iahb", "isfr", "tmds", "cec"; resets = <&ccu RST_BUS_HDMI1>; reset-names = "ctrl"; phys = <&hdmi_phy>; diff --git a/arch/arm/dts/sun8i-t3-cqa3t-bv3.dts b/arch/arm/dts/sun8i-t3-cqa3t-bv3.dts new file mode 100644 index 0000000000..6931aaab23 --- /dev/null +++ b/arch/arm/dts/sun8i-t3-cqa3t-bv3.dts @@ -0,0 +1,226 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2017 Chen-Yu Tsai + * Copyright (C) 2017 Icenowy Zheng + * Copyright (C) 2018 Hao Zhang + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-r40.dtsi" + +#include + +/ { + model = "t3-cqa3t-bv3"; + compatible = "qihua,t3-cqa3t-bv3", "allwinner,sun8i-t3", + "allwinner,sun8i-r40"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */ + enable-active-high; + }; +}; + +&ahci { + ahci-supply = <®_dldo4>; + phy-supply = <®_eldo3>; + status = "okay"; +}; + +&de { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&i2c0 { + status = "okay"; + + axp22x: pmic@34 { + compatible = "x-powers,axp221"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp22x.dtsi" + +&mmc0 { + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */ + status = "okay"; +}; + +&mmc2 { + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc-pa"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pg"; +}; + +®_dldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-dldo3"; +}; + +®_eldo3 { + regulator-always-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc-pe"; +}; + +&tcon_tv0 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_vcc5v0>; + usb2_vbus-supply = <®_vcc5v0>; + status = "okay"; +}; -- 2.39.5