From 69b8e50975c3ca623cf0f0d5bde0c93df76889e9 Mon Sep 17 00:00:00 2001 From: Jacky Bai Date: Thu, 8 Aug 2019 09:59:11 +0000 Subject: [PATCH] ddr: imx8m: Fix the ddr init hang on imx8mq On, i.MX8MQ, the PLL config must be done when ddrmix isolation is released. So move the dram pll init after iso config done. For other i.MX8M SOC, either init pll before or after isolation is ok. Signed-off-by: Jacky Bai Signed-off-by: Peng Fan --- drivers/ddr/imx/imx8m/ddr_init.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/ddr/imx/imx8m/ddr_init.c b/drivers/ddr/imx/imx8m/ddr_init.c index 12967583ea..d6e915c9b9 100644 --- a/drivers/ddr/imx/imx8m/ddr_init.c +++ b/drivers/ddr/imx/imx8m/ddr_init.c @@ -41,14 +41,14 @@ void ddr_init(struct dram_timing_info *dram_timing) clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(4) | CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV4)); - initial_drate = dram_timing->fsp_msg[0].drate; - /* default to the frequency point 0 clock */ - ddrphy_init_set_dfi_clk(initial_drate); - /* disable iso */ reg32_write(0x303A00EC, 0x0000ffff); /* PGC_CPU_MAPPING */ reg32setbit(0x303A00F8, 5); /* PU_PGC_SW_PUP_REQ */ + initial_drate = dram_timing->fsp_msg[0].drate; + /* default to the frequency point 0 clock */ + ddrphy_init_set_dfi_clk(initial_drate); + /* D-aasert the presetn */ reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000006); -- 2.39.5