From 5d336d1701567e5025c3010b325e633a677c30a2 Mon Sep 17 00:00:00 2001 From: Yangbo Lu Date: Mon, 21 Oct 2019 18:09:09 +0800 Subject: [PATCH] mmc: fsl_esdhc: drop i.MX DDR support code A previous patch below adding DDR mode support was actually for i.MX platforms. Now i.MX eSDHC driver is fsl_esdhc_imx.c. For QorIQ eSDHC, it uses different process for DDR mode, and hasn't been supported. Let's drop DDR support code for i.MX in fsl_esdhc driver. 0e1bf61 mmc: fsl_esdhc: Add support for DDR mode Signed-off-by: Yangbo Lu --- drivers/mmc/fsl_esdhc.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 03c54c3a7f..cd357ea411 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -501,7 +501,6 @@ static void set_sysctl(struct fsl_esdhc_priv *priv, struct mmc *mmc, uint clock) struct fsl_esdhc *regs = priv->esdhc_regs; int div = 1; int pre_div = 2; - int ddr_pre_div = mmc->ddr_mode ? 2 : 1; unsigned int sdhc_clk = priv->sdhc_clk; u32 time_out; u32 value; @@ -510,10 +509,10 @@ static void set_sysctl(struct fsl_esdhc_priv *priv, struct mmc *mmc, uint clock) if (clock < mmc->cfg->f_min) clock = mmc->cfg->f_min; - while (sdhc_clk / (16 * pre_div * ddr_pre_div) > clock && pre_div < 256) + while (sdhc_clk / (16 * pre_div) > clock && pre_div < 256) pre_div *= 2; - while (sdhc_clk / (div * pre_div * ddr_pre_div) > clock && div < 16) + while (sdhc_clk / (div * pre_div) > clock && div < 16) div++; pre_div >>= 1; @@ -773,9 +772,6 @@ static int fsl_esdhc_init(struct fsl_esdhc_priv *priv, cfg->host_caps = MMC_MODE_4BIT; cfg->host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT; -#ifdef CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE - cfg->host_caps |= MMC_MODE_DDR_52MHz; -#endif if (priv->bus_width > 0) { if (priv->bus_width < 8) -- 2.39.5