From 4854ebc57e88f371963b5fa12587a3dd5e116e79 Mon Sep 17 00:00:00 2001 From: Bin Meng Date: Wed, 24 Oct 2018 06:36:28 -0700 Subject: [PATCH] arm: stm32mp: Remove DM_FLAG_PRE_RELOC flag When a driver declares DM_FLAG_PRE_RELOC flag, it wishes to be bound before relocation. However due to a bug in the DM core, the flag only takes effect when devices are statically declared via U_BOOT_DEVICE(). This bug has been fixed recently by commit "dm: core: Respect drivers with the DM_FLAG_PRE_RELOC flag in lists_bind_fdt()", but with the fix, it has a side effect that all existing drivers that declared DM_FLAG_PRE_RELOC flag will be bound before relocation now. This may expose potential boot failure on some boards due to insufficient memory during the pre-relocation stage. To mitigate this potential impact, the following changes are implemented: - Remove DM_FLAG_PRE_RELOC flag in the driver, if the driver only supports configuration from device tree (OF_CONTROL) - Keep DM_FLAG_PRE_RELOC flag in the driver only if the device is statically declared via U_BOOT_DEVICE() - Surround DM_FLAG_PRE_RELOC flag with OF_CONTROL check, for drivers that support both statically declared devices and configuration from device tree Signed-off-by: Bin Meng Reviewed-by: Simon Glass Reviewed-by: Patrick Delaunay --- arch/arm/mach-stm32mp/bsec.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-stm32mp/bsec.c b/arch/arm/mach-stm32mp/bsec.c index 0e152efc04..d087a31389 100644 --- a/arch/arm/mach-stm32mp/bsec.c +++ b/arch/arm/mach-stm32mp/bsec.c @@ -417,7 +417,6 @@ U_BOOT_DRIVER(stm32mp_bsec) = { .ofdata_to_platdata = stm32mp_bsec_ofdata_to_platdata, .platdata_auto_alloc_size = sizeof(struct stm32mp_bsec_platdata), .ops = &stm32mp_bsec_ops, - .flags = DM_FLAG_PRE_RELOC, }; /* bsec IP is not present in device tee, manage IP address by platdata */ -- 2.39.5