From 41613a7a58fd2e2745ea32c00325d7c0dff7cc8c Mon Sep 17 00:00:00 2001 From: Robert Beckett Date: Fri, 31 Jan 2020 15:07:55 +0200 Subject: [PATCH] board: ge: bx50v3: add i2c eeprom bootcount storage Add bootcount node, linking to i2c eeprom "bootcount" partitions for storage. Enable i2c eeprom bootcount backend storage. Enable bootcount command and use it for failbootcmd. Signed-off-by: Robert Beckett --- arch/arm/dts/imx6q-bx50v3-uboot.dtsi | 7 ++++++- configs/ge_bx50v3_defconfig | 6 +++--- include/configs/ge_bx50v3.h | 4 +--- 3 files changed, 10 insertions(+), 7 deletions(-) diff --git a/arch/arm/dts/imx6q-bx50v3-uboot.dtsi b/arch/arm/dts/imx6q-bx50v3-uboot.dtsi index 99d409db35..77115a7a9a 100644 --- a/arch/arm/dts/imx6q-bx50v3-uboot.dtsi +++ b/arch/arm/dts/imx6q-bx50v3-uboot.dtsi @@ -5,6 +5,11 @@ */ / { + bootcount { + compatible = "u-boot,bootcount-i2c-eeprom"; + i2c-eeprom = <&bootcount>; + }; + wdt-reboot { compatible = "wdt-reboot"; wdt = <&wdog1>; @@ -20,7 +25,7 @@ size = <1022>; }; - bootcount { + bootcount: bootcount { offset = <1022>; size = <2>; }; diff --git a/configs/ge_bx50v3_defconfig b/configs/ge_bx50v3_defconfig index 746bc25742..b19861c89c 100644 --- a/configs/ge_bx50v3_defconfig +++ b/configs/ge_bx50v3_defconfig @@ -8,7 +8,6 @@ CONFIG_ENV_SECT_SIZE=0x10000 CONFIG_ENV_OFFSET=0xC0000 CONFIG_DM_GPIO=y CONFIG_BOOTCOUNT_BOOTLIMIT=10 -CONFIG_SYS_BOOTCOUNT_ADDR=0x7000A000 CONFIG_NR_DRAM_BANKS=1 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_FIT=y @@ -30,6 +29,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y # CONFIG_CMD_NFS is not set +CONFIG_CMD_BOOTCOUNT=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y @@ -45,8 +45,8 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_BOOTCOUNT_EXT=y -CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="1:5" +CONFIG_DM_BOOTCOUNT=y +CONFIG_DM_BOOTCOUNT_I2C_EEPROM=y CONFIG_DM_MMC=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_MXC=y diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index b8b1ec704e..b9227fc2fe 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -109,9 +109,7 @@ "setcurs 5 4; " \ "lcdputs \"Monitor failed to start. " \ "Try again, or contact GE Service for support.\"; " \ - "mw.b 0x7000A000 0xbc; " \ - "mw.b 0x7000A001 0x00; " \ - "ext4write ${dev} ${devnum}:5 0x7000A000 /boot/failures 2\0" \ + "bootcount reset; \0" \ "altbootcmd=" \ "run doquiet; " \ "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \ -- 2.39.5