From 3bb0458fa0ef127718ed1c47c33279f9ef03238d Mon Sep 17 00:00:00 2001 From: =?utf8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org> Date: Thu, 22 Sep 2022 13:43:46 +0200 Subject: [PATCH] arm: mvebu: turris_omnia: Specify VHV gpio for eFUSE programming MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit VHV gpio is connected to MCU and only on updated board design. Without it eFUSE programming does not work. Omnia MCU driver exports this GPIO to U-Boot under name mcu_56 and only when it is supported by MCU. So U-Boot fuse command refuse eFUSE programming on older board design when VHV gpio is not available. We tested that Armada 385 without connected VHV gpio can do eFUSE programming but only for some bits and only sometimes - it is unstable. And better to be disabled on older board design without VHV gpio support. Signed-off-by: Pali Rohár <pali@kernel.org> --- configs/turris_omnia_defconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/configs/turris_omnia_defconfig b/configs/turris_omnia_defconfig index 6698f23135..639c68cdb7 100644 --- a/configs/turris_omnia_defconfig +++ b/configs/turris_omnia_defconfig @@ -10,6 +10,8 @@ CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_TURRIS_OMNIA=y CONFIG_DDR_RESET_ON_TRAINING_FAILURE=y CONFIG_MVEBU_EFUSE=y +CONFIG_MVEBU_EFUSE_VHV_GPIO="mcu_56" +CONFIG_MVEBU_EFUSE_VHV_GPIO_ACTIVE_LOW=y CONFIG_ENV_SIZE=0x10000 CONFIG_ENV_OFFSET=0xF0000 CONFIG_ENV_SECT_SIZE=0x10000 -- 2.39.5