From 37559488a95e45d553e7d0a0a532692a7032f554 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Tue, 7 Jul 2020 21:19:39 +0530 Subject: [PATCH] arm: Remove bav335x board OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Cc: Gilles Gameiro Signed-off-by: Jagan Teki --- arch/arm/Kconfig | 1 - arch/arm/mach-omap2/am33xx/Kconfig | 15 - board/birdland/bav335x/Kconfig | 23 -- board/birdland/bav335x/Makefile | 11 - board/birdland/bav335x/README | 31 -- board/birdland/bav335x/board.c | 432 -------------------------- board/birdland/bav335x/board.h | 58 ---- board/birdland/bav335x/mux.c | 190 ------------ board/birdland/bav335x/u-boot.lds | 115 ------- configs/birdland_bav335a_defconfig | 69 ----- configs/birdland_bav335b_defconfig | 69 ----- include/configs/bav335x.h | 475 ----------------------------- 12 files changed, 1489 deletions(-) delete mode 100644 board/birdland/bav335x/Kconfig delete mode 100644 board/birdland/bav335x/Makefile delete mode 100644 board/birdland/bav335x/README delete mode 100644 board/birdland/bav335x/board.c delete mode 100644 board/birdland/bav335x/board.h delete mode 100644 board/birdland/bav335x/mux.c delete mode 100644 board/birdland/bav335x/u-boot.lds delete mode 100644 configs/birdland_bav335a_defconfig delete mode 100644 configs/birdland_bav335b_defconfig delete mode 100644 include/configs/bav335x.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index f115fcdcc4..6c423fe1a2 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1934,7 +1934,6 @@ source "board/spear/spear600/Kconfig" source "board/spear/x600/Kconfig" source "board/st/stv0991/Kconfig" source "board/tcl/sl50/Kconfig" -source "board/birdland/bav335x/Kconfig" source "board/toradex/colibri_pxa270/Kconfig" source "board/variscite/dart_6ul/Kconfig" source "board/vscom/baltos/Kconfig" diff --git a/arch/arm/mach-omap2/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig index 39d9c2873b..a93fbf4ea0 100644 --- a/arch/arm/mach-omap2/am33xx/Kconfig +++ b/arch/arm/mach-omap2/am33xx/Kconfig @@ -103,21 +103,6 @@ config TARGET_AM335X_SL50 select DM_SERIAL imply CMD_DM -config TARGET_BAV335X - bool "Support bav335x" - select BOARD_LATE_INIT - select DM - select DM_SERIAL - imply CMD_DM - help - The BAV335x OEM Network Processor integrates all the functions of an - embedded network computer in a small, easy to use SODIMM module which - incorporates the popular Texas Instruments Sitara 32bit ARM Coretex-A8 - processor, with fast DDR3 512MB SDRAM, 4GB of embedded MMC and a Gigabit - ethernet with simple connection to external connectors. - - For more information, visit: http://birdland.com/oem - config TARGET_BRXRE1 bool "Support BRXRE1" select BOARD_LATE_INIT diff --git a/board/birdland/bav335x/Kconfig b/board/birdland/bav335x/Kconfig deleted file mode 100644 index 40053665aa..0000000000 --- a/board/birdland/bav335x/Kconfig +++ /dev/null @@ -1,23 +0,0 @@ -if TARGET_BAV335X - -config SYS_BOARD - default "bav335x" - -config SYS_VENDOR - default "birdland" - -config SYS_SOC - default "am33xx" - -config SYS_CONFIG_NAME - default "bav335x" - -config BAV_VERSION - int "BAV335x Version (1=A, 2=B)" - range 1 2 - help - The BAV335x has various version of the board. Rev.A (mostly obsolete) - used 10/100 Ethernet PHY while Rev.B uses a Gigabit Ethernet PHY. - Overwrite this if you have an older Rev.A and want ethernet support. - -endif diff --git a/board/birdland/bav335x/Makefile b/board/birdland/bav335x/Makefile deleted file mode 100644 index 42cefa1f85..0000000000 --- a/board/birdland/bav335x/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Makefile -# -# Copyright (C) 2012-2014, Birdland Audio - http://birdland.com/oem - -ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),) -obj-y := mux.o -endif - -obj-y += board.o diff --git a/board/birdland/bav335x/README b/board/birdland/bav335x/README deleted file mode 100644 index 08c73eee0c..0000000000 --- a/board/birdland/bav335x/README +++ /dev/null @@ -1,31 +0,0 @@ -Summary -======= - -This document covers various features of the 'BAV335x' board build. -For more information about this board, visit http://birdland.com/oem - - -Hardware -======== - -The binary produced supports the bav335x Rev.A with 10/100 MB PHY -and Rev.B (default) with GB ethernet PHY. -If the BAV335x EEPROM is populated and programmed, the board will -automatically detect the version and extract proper serial# and -mac address from the EE. - - -Customization -============= - -The following blocks are required: -- I2C, to talk with the PMIC and ensure that we do not run afoul of - errata 1.0.24. - -When removing options as part of customization, -CONFIG_EXTRA_ENV_SETTINGS will need additional care to update for your -needs and to remove no longer relevant options as in some cases we -define additional text blocks (such as for NAND or DFU strings). Also -note that all of the SPL options are grouped together, rather than with -the IP blocks, so both areas will need their choices updated to reflect -the custom design. diff --git a/board/birdland/bav335x/board.c b/board/birdland/bav335x/board.c deleted file mode 100644 index 5900e65466..0000000000 --- a/board/birdland/bav335x/board.c +++ /dev/null @@ -1,432 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * board.c - * - * Board functions for Birdland Audio BAV335x Network Processor - * - * Copyright (c) 2012-2014 Birdland Audio - http://birdland.com/oem - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "board.h" - -DECLARE_GLOBAL_DATA_PTR; - -/* GPIO that controls power to DDR on EVM-SK */ -#define GPIO_DDR_VTT_EN 7 - -static __maybe_unused struct ctrl_dev *cdev = - (struct ctrl_dev *)CTRL_DEVICE_BASE; - - - -/* - * Read header information from EEPROM into global structure. - */ -static int read_eeprom(struct board_eeconfig *header) -{ - /* Check if baseboard eeprom is available */ - if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) - return -ENODEV; - - /* read the eeprom using i2c */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)header, - sizeof(struct board_eeconfig))) - return -EIO; - - if (header->magic != BOARD_MAGIC) { - /* read the i2c eeprom again using only a 1 byte address */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1, (uchar *)header, - sizeof(struct board_eeconfig))) - return -EIO; - - if (header->magic != BOARD_MAGIC) - return -EINVAL; - } - return 0; -} - - - - -enum board_type get_board_type(bool debug) -{ - int ecode; - struct board_eeconfig header; - - ecode = read_eeprom(&header); - if (ecode == 0) { - if (header.version[1] == 'A') { - if (debug) - puts("=== Detected Board model BAV335x Rev.A"); - return BAV335A; - } else if (header.version[1] == 'B') { - if (debug) - puts("=== Detected Board model BAV335x Rev.B"); - return BAV335B; - } else if (debug) { - puts("### Un-known board model in serial-EE\n"); - } - } else if (debug) { - switch (ecode) { - case -ENODEV: - puts("### Board doesn't have a serial-EE\n"); - break; - case -EINVAL: - puts("### Board serial-EE signature is incorrect.\n"); - break; - default: - puts("### IO Error reading serial-EE.\n"); - break; - } - } - -#if (CONFIG_BAV_VERSION == 1) - if (debug) - puts("### Selecting BAV335A as per config\n"); - return BAV335A; -#elif (CONFIG_BAV_VERSION == 2) - if (debug) - puts("### Selecting BAV335B as per config\n"); - return BAV335B; -#endif -#if (NOT_DEFINED == 2) -#error "SHOULD NEVER DISPLAY THIS" -#endif - - if (debug) - puts("### Defaulting to model BAV335x Rev.B\n"); - return BAV335B; -} - - - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -static const struct ddr_data ddr3_bav335x_data = { - .datardsratio0 = MT41K256M16HA125E_RD_DQS, - .datawdsratio0 = MT41K256M16HA125E_WR_DQS, - .datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE, - .datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA, -}; - -static const struct cmd_control ddr3_bav335x_cmd_ctrl_data = { - .cmd0csratio = MT41K256M16HA125E_RATIO, - .cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT, - .cmd1csratio = MT41K256M16HA125E_RATIO, - .cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT, - .cmd2csratio = MT41K256M16HA125E_RATIO, - .cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT, -}; - - -static struct emif_regs ddr3_bav335x_emif_reg_data = { - .sdram_config = MT41K256M16HA125E_EMIF_SDCFG, - .ref_ctrl = MT41K256M16HA125E_EMIF_SDREF, - .sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1, - .sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2, - .sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3, - .zq_config = MT41K256M16HA125E_ZQ_CFG, - .emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY, -}; - - -#ifdef CONFIG_SPL_OS_BOOT -int spl_start_uboot(void) -{ - /* break into full u-boot on 'c' */ - if (serial_tstc() && serial_getc() == 'c') - return 1; - -#ifdef CONFIG_SPL_ENV_SUPPORT - env_init(); - env_load(); - if (env_get_yesno("boot_os") != 1) - return 1; -#endif - - return 0; -} -#endif - -#define OSC (V_OSCK/1000000) -const struct dpll_params dpll_ddr = { - 266, OSC-1, 1, -1, -1, -1, -1}; -const struct dpll_params dpll_ddr_evm_sk = { - 303, OSC-1, 1, -1, -1, -1, -1}; -const struct dpll_params dpll_ddr_bone_black = { - 400, OSC-1, 1, -1, -1, -1, -1}; - -void am33xx_spl_board_init(void) -{ - /* debug print detect status */ - (void)get_board_type(true); - - /* Get the frequency */ - /* dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev); */ - dpll_mpu_opp100.m = MPUPLL_M_1000; - - if (i2c_probe(TPS65217_CHIP_PM)) - return; - - /* Set the USB Current Limit */ - if (tps65217_reg_write(TPS65217_PROT_LEVEL_NONE, TPS65217_POWER_PATH, - TPS65217_USB_INPUT_CUR_LIMIT_1800MA, - TPS65217_USB_INPUT_CUR_LIMIT_MASK)) - puts("! tps65217_reg_write: could not set USB limit\n"); - - /* Set the Core Voltage (DCDC3) to 1.125V */ - if (tps65217_voltage_update(TPS65217_DEFDCDC3, - TPS65217_DCDC_VOLT_SEL_1125MV)) { - puts("! tps65217_reg_write: could not set Core Voltage\n"); - return; - } - - /* Set CORE Frequencies to OPP100 */ - do_setup_dpll(&dpll_core_regs, &dpll_core_opp100); - - /* Set the MPU Voltage (DCDC2) */ - if (tps65217_voltage_update(TPS65217_DEFDCDC2, - TPS65217_DCDC_VOLT_SEL_1325MV)) { - puts("! tps65217_reg_write: could not set MPU Voltage\n"); - return; - } - - /* - * Set LDO3, LDO4 output voltage to 3.3V for Beaglebone. - * Set LDO3 to 1.8V and LDO4 to 3.3V for Beaglebone Black. - */ - if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, TPS65217_DEFLS1, - TPS65217_LDO_VOLTAGE_OUT_1_8, TPS65217_LDO_MASK)) - puts("! tps65217_reg_write: could not set LDO3\n"); - - if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, TPS65217_DEFLS2, - TPS65217_LDO_VOLTAGE_OUT_3_3, TPS65217_LDO_MASK)) - puts("! tps65217_reg_write: could not set LDO4\n"); - - /* Set MPU Frequency to what we detected now that voltages are set */ - do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100); -} - -const struct dpll_params *get_dpll_ddr_params(void) -{ - enable_i2c0_pin_mux(); - i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); - - return &dpll_ddr_bone_black; -} - -void set_uart_mux_conf(void) -{ -#if CONFIG_CONS_INDEX == 1 - enable_uart0_pin_mux(); -#elif CONFIG_CONS_INDEX == 2 - enable_uart1_pin_mux(); -#elif CONFIG_CONS_INDEX == 3 - enable_uart2_pin_mux(); -#elif CONFIG_CONS_INDEX == 4 - enable_uart3_pin_mux(); -#elif CONFIG_CONS_INDEX == 5 - enable_uart4_pin_mux(); -#elif CONFIG_CONS_INDEX == 6 - enable_uart5_pin_mux(); -#endif -} - -void set_mux_conf_regs(void) -{ - enum board_type board; - - board = get_board_type(false); - enable_board_pin_mux(board); -} - -const struct ctrl_ioregs ioregs_bonelt = { - .cm0ioctl = MT41K256M16HA125E_IOCTRL_VALUE, - .cm1ioctl = MT41K256M16HA125E_IOCTRL_VALUE, - .cm2ioctl = MT41K256M16HA125E_IOCTRL_VALUE, - .dt0ioctl = MT41K256M16HA125E_IOCTRL_VALUE, - .dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE, -}; - - -void sdram_init(void) -{ - config_ddr(400, &ioregs_bonelt, - &ddr3_bav335x_data, - &ddr3_bav335x_cmd_ctrl_data, - &ddr3_bav335x_emif_reg_data, 0); -} -#endif - -/* - * Basic board specific setup. Pinmux has been handled already. - */ -int board_init(void) -{ -#if defined(CONFIG_HW_WATCHDOG) - hw_watchdog_init(); -#endif - - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; -#if defined(CONFIG_NOR) || defined(CONFIG_MTD_RAW_NAND) - gpmc_init(); -#endif - return 0; -} - -#ifdef CONFIG_BOARD_LATE_INIT -int board_late_init(void) -{ -#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - env_set("board_name", "BAV335xB"); - env_set("board_rev", "B"); /* Fix me, but why bother.. */ -#endif - return 0; -} -#endif - - -#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ - (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) -static void cpsw_control(int enabled) -{ - /* VTP can be added here */ - return; -} - -static struct cpsw_slave_data cpsw_slaves[] = { - { - .slave_reg_ofs = 0x208, - .sliver_reg_ofs = 0xd80, - .phy_addr = 0, - }, - { - .slave_reg_ofs = 0x308, - .sliver_reg_ofs = 0xdc0, - .phy_addr = 1, - }, -}; - -static struct cpsw_platform_data cpsw_data = { - .mdio_base = CPSW_MDIO_BASE, - .cpsw_base = CPSW_BASE, - .mdio_div = 0xff, - .channels = 8, - .cpdma_reg_ofs = 0x800, - .slaves = 1, - .slave_data = cpsw_slaves, - .ale_reg_ofs = 0xd00, - .ale_entries = 1024, - .host_port_reg_ofs = 0x108, - .hw_stats_reg_ofs = 0x900, - .bd_ram_ofs = 0x2000, - .mac_control = (1 << 5), - .control = cpsw_control, - .host_port_num = 0, - .version = CPSW_CTRL_VERSION_2, -}; -#endif - - -/* - * This function will: - * Perform fixups to the PHY present on certain boards. We only need this - * function in: - * - SPL with either CPSW or USB ethernet support - * - Full U-Boot, with either CPSW or USB ethernet - * Build in only these cases to avoid warnings about unused variables - * when we build an SPL that has neither option but full U-Boot will. - */ -#if ((defined(CONFIG_SPL_ETH_SUPPORT) || defined(CONFIG_SPL_USB_ETHER)) &&\ - defined(CONFIG_SPL_BUILD)) || \ - ((defined(CONFIG_DRIVER_TI_CPSW) || \ - defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET)) && \ - !defined(CONFIG_SPL_BUILD)) -int board_eth_init(bd_t *bis) -{ - int ecode, rv, n; - uint8_t mac_addr[6]; - struct board_eeconfig header; - __maybe_unused enum board_type board; - - /* Default manufacturing address; used when no EE or invalid */ - n = 0; - mac_addr[0] = 0; - mac_addr[1] = 0x20; - mac_addr[2] = 0x18; - mac_addr[3] = 0x1C; - mac_addr[4] = 0x00; - mac_addr[5] = 0x01; - - ecode = read_eeprom(&header); - /* if we have a valid EE, get mac address from there */ - if ((ecode == 0) && - is_valid_ethaddr((const u8 *)&header.mac_addr[0][0])) { - memcpy(mac_addr, (const void *)&header.mac_addr[0][0], 6); - } - - -#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ - (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) - - if (!env_get("ethaddr")) { - printf(" not set. Validating first E-fuse MAC\n"); - - if (is_valid_ethaddr(mac_addr)) - eth_env_set_enetaddr("ethaddr", mac_addr); - } - -#ifdef CONFIG_DRIVER_TI_CPSW - - board = get_board_type(false); - - /* Rev.A uses 10/100 PHY in mii mode */ - if (board == BAV335A) { - writel(MII_MODE_ENABLE, &cdev->miisel); - cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_MII; - cpsw_slaves[1].phy_if = PHY_INTERFACE_MODE_MII; - } - /* Rev.B (default) uses GB PHY in rmii mode */ - else { - writel((RGMII_MODE_ENABLE | RGMII_INT_DELAY), &cdev->miisel); - cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if - = PHY_INTERFACE_MODE_RGMII; - } - - rv = cpsw_register(&cpsw_data); - if (rv < 0) - printf("Error %d registering CPSW switch\n", rv); - else - n += rv; -#endif - -#endif - - return n; -} -#endif diff --git a/board/birdland/bav335x/board.h b/board/birdland/bav335x/board.h deleted file mode 100644 index ddbd5d0459..0000000000 --- a/board/birdland/bav335x/board.h +++ /dev/null @@ -1,58 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * board.c - * - * Board functions for Birdland Audio BAV335x Network Processor - * - * Copyright (c) 2012-2014, Birdland Audio - http://birdland.com/oem - * - */ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* Serial MagicE: AA 55 BA BE */ -#define BOARD_MAGIC 0xBEBA55AA -enum board_type {UNKNOWN, BAV335A, BAV335B}; - - -/* - * The BAV335x may use a built-in read-only serial EEProm. - * The Evaluation board, disables the write-protect so the Serial-EE - * Can be programmed during manufacturing to store fields such as - * a board serial number, ethernet mac address and other user fields. - * Additionally, the Serial-EE can store the specific version of the - * board it runs on, and overwrite the defaults in _defconfig - */ -#define HDR_NO_OF_MAC_ADDR 3 -#define HDR_ETH_ALEN 6 -#define HDR_NAME_LEN 8 - -struct board_eeconfig { - unsigned int magic; - char name[HDR_NAME_LEN]; /* BAV3354 */ - char version[4]; /* 0B20 - Rev.B2 */ - char serial[16]; - char config[32]; - char mac_addr[HDR_NO_OF_MAC_ADDR][HDR_ETH_ALEN]; -}; - -enum board_type get_board_type(bool verbose_debug_output); - - -/* - * We have three pin mux functions that must exist. We must be able to enable - * uart0, for initial output and i2c0 to read the main EEPROM. We then have a - * main pinmux function that can be overridden to enable all other pinmux that - * is required on the board. - */ -void enable_uart0_pin_mux(void); -void enable_uart1_pin_mux(void); -void enable_uart2_pin_mux(void); -void enable_uart3_pin_mux(void); -void enable_uart4_pin_mux(void); -void enable_uart5_pin_mux(void); -void enable_i2c0_pin_mux(void); -void enable_board_pin_mux(enum board_type board); - -#endif diff --git a/board/birdland/bav335x/mux.c b/board/birdland/bav335x/mux.c deleted file mode 100644 index f18bfa4f60..0000000000 --- a/board/birdland/bav335x/mux.c +++ /dev/null @@ -1,190 +0,0 @@ -/* - * mux.c - * - * Copyright (c) 2012-2014 Birdland Audio - http://birdland.com/oem - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include "board.h" - -static struct module_pin_mux uart0_pin_mux[] = { - {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ - {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */ - {-1}, -}; - -static struct module_pin_mux uart1_pin_mux[] = { - {OFFSET(uart1_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART1_RXD */ - {OFFSET(uart1_txd), (MODE(0) | PULLUDEN)}, /* UART1_TXD */ - {-1}, -}; - -static struct module_pin_mux uart2_pin_mux[] = { - {OFFSET(spi0_sclk), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART2_RXD */ - {OFFSET(spi0_d0), (MODE(1) | PULLUDEN)}, /* UART2_TXD */ - {-1}, -}; - -static struct module_pin_mux uart3_pin_mux[] = { - {OFFSET(spi0_cs1), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART3_RXD */ - {OFFSET(ecap0_in_pwm0_out), (MODE(1) | PULLUDEN)}, /* UART3_TXD */ - {-1}, -}; - -static struct module_pin_mux uart4_pin_mux[] = { - {OFFSET(gpmc_wait0), (MODE(6) | PULLUP_EN | RXACTIVE)}, /* UART4_RXD */ - {OFFSET(gpmc_wpn), (MODE(6) | PULLUDEN)}, /* UART4_TXD */ - {-1}, -}; - -static struct module_pin_mux uart5_pin_mux[] = { - {OFFSET(lcd_data9), (MODE(4) | PULLUP_EN | RXACTIVE)}, /* UART5_RXD */ - {OFFSET(lcd_data8), (MODE(4) | PULLUDEN)}, /* UART5_TXD */ - {-1}, -}; - -static struct module_pin_mux mmc0_pin_mux[] = { - {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ - {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ - {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */ - {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ - {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ - {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ - {OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)}, /* MMC0_WP */ - {OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)}, /* MMC0_CD */ - {-1}, -}; - -static struct module_pin_mux mmc1_pin_mux[] = { - {OFFSET(gpmc_ad3), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT3 */ - {OFFSET(gpmc_ad2), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT2 */ - {OFFSET(gpmc_ad1), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT1 */ - {OFFSET(gpmc_ad0), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT0 */ - {OFFSET(gpmc_csn1), (MODE(2) | RXACTIVE | PULLUP_EN)}, /* MMC1_CLK */ - {OFFSET(gpmc_csn2), (MODE(2) | RXACTIVE | PULLUP_EN)}, /* MMC1_CMD */ - {OFFSET(gpmc_csn0), (MODE(7) | RXACTIVE | PULLUP_EN)}, /* MMC1_WP */ - {OFFSET(gpmc_advn_ale), (MODE(7) | RXACTIVE | PULLUP_EN)},/* MMC1_CD */ - {-1}, -}; - -static struct module_pin_mux i2c0_pin_mux[] = { - {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | - PULLUDEN | SLEWCTRL)}, /* I2C_DATA */ - {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | - PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */ - {-1}, -}; - -static struct module_pin_mux i2c1_pin_mux[] = { - {OFFSET(spi0_d1), (MODE(2) | RXACTIVE | - PULLUDEN | SLEWCTRL)}, /* I2C_DATA */ - {OFFSET(spi0_cs0), (MODE(2) | RXACTIVE | - PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */ - {-1}, -}; - -static struct module_pin_mux rgmii1_pin_mux[] = { - {OFFSET(mii1_txen), MODE(2)}, /* RGMII1_TCTL */ - {OFFSET(mii1_rxdv), MODE(2) | RXACTIVE}, /* RGMII1_RCTL */ - {OFFSET(mii1_txd3), MODE(2)}, /* RGMII1_TD3 */ - {OFFSET(mii1_txd2), MODE(2)}, /* RGMII1_TD2 */ - {OFFSET(mii1_txd1), MODE(2)}, /* RGMII1_TD1 */ - {OFFSET(mii1_txd0), MODE(2)}, /* RGMII1_TD0 */ - {OFFSET(mii1_txclk), MODE(2)}, /* RGMII1_TCLK */ - {OFFSET(mii1_rxclk), MODE(2) | RXACTIVE}, /* RGMII1_RCLK */ - {OFFSET(mii1_rxd3), MODE(2) | RXACTIVE}, /* RGMII1_RD3 */ - {OFFSET(mii1_rxd2), MODE(2) | RXACTIVE}, /* RGMII1_RD2 */ - {OFFSET(mii1_rxd1), MODE(2) | RXACTIVE}, /* RGMII1_RD1 */ - {OFFSET(mii1_rxd0), MODE(2) | RXACTIVE}, /* RGMII1_RD0 */ - {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},/* MDIO_DATA */ - {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ - {-1}, -}; - -static struct module_pin_mux mii1_pin_mux[] = { - {OFFSET(mii1_rxerr), MODE(0) | RXACTIVE}, /* MII1_RXERR */ - {OFFSET(mii1_txen), MODE(0)}, /* MII1_TXEN */ - {OFFSET(mii1_rxdv), MODE(0) | RXACTIVE}, /* MII1_RXDV */ - {OFFSET(mii1_txd3), MODE(0)}, /* MII1_TXD3 */ - {OFFSET(mii1_txd2), MODE(0)}, /* MII1_TXD2 */ - {OFFSET(mii1_txd1), MODE(0)}, /* MII1_TXD1 */ - {OFFSET(mii1_txd0), MODE(0)}, /* MII1_TXD0 */ - {OFFSET(mii1_txclk), MODE(0) | RXACTIVE}, /* MII1_TXCLK */ - {OFFSET(mii1_rxclk), MODE(0) | RXACTIVE}, /* MII1_RXCLK */ - {OFFSET(mii1_rxd3), MODE(0) | RXACTIVE}, /* MII1_RXD3 */ - {OFFSET(mii1_rxd2), MODE(0) | RXACTIVE}, /* MII1_RXD2 */ - {OFFSET(mii1_rxd1), MODE(0) | RXACTIVE}, /* MII1_RXD1 */ - {OFFSET(mii1_rxd0), MODE(0) | RXACTIVE}, /* MII1_RXD0 */ - {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */ - {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ - {-1}, -}; - - -void enable_uart0_pin_mux(void) -{ - configure_module_pin_mux(uart0_pin_mux); -} - -void enable_uart1_pin_mux(void) -{ - configure_module_pin_mux(uart1_pin_mux); -} - -void enable_uart2_pin_mux(void) -{ - configure_module_pin_mux(uart2_pin_mux); -} - -void enable_uart3_pin_mux(void) -{ - configure_module_pin_mux(uart3_pin_mux); -} - -void enable_uart4_pin_mux(void) -{ - configure_module_pin_mux(uart4_pin_mux); -} - -void enable_uart5_pin_mux(void) -{ - configure_module_pin_mux(uart5_pin_mux); -} - -void enable_i2c0_pin_mux(void) -{ - configure_module_pin_mux(i2c0_pin_mux); -} - - -/* CPLD registers */ -#define I2C_CPLD_ADDR 0x35 -#define CFG_REG 0x10 - - -void enable_board_pin_mux(enum board_type board) -{ - configure_module_pin_mux(i2c1_pin_mux); - if (board == BAV335A) - configure_module_pin_mux(mii1_pin_mux); /* MII Mode: 10/100MB */ - else - configure_module_pin_mux(rgmii1_pin_mux); /* RGMII Mode: GB */ - - configure_module_pin_mux(mmc0_pin_mux); - configure_module_pin_mux(mmc1_pin_mux); -} diff --git a/board/birdland/bav335x/u-boot.lds b/board/birdland/bav335x/u-boot.lds deleted file mode 100644 index 5d0c5cf27e..0000000000 --- a/board/birdland/bav335x/u-boot.lds +++ /dev/null @@ -1,115 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (c) 2012-2014 Birdland Audio - http://birdland.com/oem - * Copyright (c) 2004-2008 Texas Instruments - * - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, - * - * See file CREDITS for list of people who contributed to this - * project. - */ - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -ENTRY(_start) -SECTIONS -{ - . = 0x00000000; - - . = ALIGN(4); - .text : - { - *(.__image_copy_start) - *(.vectors) - CPUDIR/start.o (.text*) - board/birdland/bav335x/built-in.o (.text*) - *(.text*) - } - - . = ALIGN(4); - .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } - - . = ALIGN(4); - .data : { - *(.data*) - } - - . = ALIGN(4); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - . = ALIGN(4); - - .image_copy_end : - { - *(.__image_copy_end) - } - - .rel_dyn_start : - { - *(.__rel_dyn_start) - } - - .rel.dyn : { - *(.rel*) - } - - .rel_dyn_end : - { - *(.__rel_dyn_end) - } - - .hash : { *(.hash*) } - - .end : - { - *(.__end) - } - - _image_binary_end = .; - - /* - * Deprecated: this MMU section is used by pxa at present but - * should not be used by new boards/CPUs. - */ - . = ALIGN(4096); - .mmutable : { - *(.mmutable) - } - -/* - * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c - * __bss_base and __bss_limit are for linker only (overlay ordering) - */ - - .bss_start __rel_dyn_start (OVERLAY) : { - KEEP(*(.__bss_start)); - __bss_base = .; - } - - .bss __bss_base (OVERLAY) : { - *(.bss*) - . = ALIGN(4); - __bss_limit = .; - } - - .bss_end __bss_limit (OVERLAY) : { - KEEP(*(.__bss_end)); - } - - .dynsym _image_binary_end : { *(.dynsym) } - .dynbss : { *(.dynbss) } - .dynstr : { *(.dynstr*) } - .dynamic : { *(.dynamic*) } - .gnu.hash : { *(.gnu.hash) } - .plt : { *(.plt*) } - .interp : { *(.interp*) } - .gnu : { *(.gnu*) } - .ARM.exidx : { *(.ARM.exidx*) } -} diff --git a/configs/birdland_bav335a_defconfig b/configs/birdland_bav335a_defconfig deleted file mode 100644 index a20798be54..0000000000 --- a/configs/birdland_bav335a_defconfig +++ /dev/null @@ -1,69 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_CPU_INIT=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_SPL_GPIO_SUPPORT=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_AM33XX=y -CONFIG_TARGET_BAV335X=y -CONFIG_SPL_MMC_SUPPORT=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL=y -CONFIG_SPL_FS_FAT=y -CONFIG_SPL_LIBDISK_SUPPORT=y -CONFIG_BAV_VERSION=1 -CONFIG_DISTRO_DEFAULTS=y -# CONFIG_USE_BOOTCOMMAND is not set -CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_VERSION_VARIABLE=y -CONFIG_ARCH_MISC_INIT=y -CONFIG_SPL_FS_EXT4=y -CONFIG_SPL_I2C_SUPPORT=y -CONFIG_SPL_MUSB_NEW_SUPPORT=y -# CONFIG_SPL_NAND_SUPPORT is not set -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_POWER_SUPPORT=y -CONFIG_SPL_WATCHDOG_SUPPORT=y -CONFIG_SPL_YMODEM_SUPPORT=y -CONFIG_CMD_SPL=y -CONFIG_CMD_ASKENV=y -CONFIG_CMD_EEPROM=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y -CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_BOOTP_DNS2=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_DFU_MMC=y -CONFIG_DFU_RAM=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_FASTBOOT_BUF_ADDR=0x82000000 -CONFIG_MMC_OMAP_HS=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_SPEED=24000000 -CONFIG_SPI_FLASH_WINBOND=y -CONFIG_PHY_SMSC=y -CONFIG_MII=y -CONFIG_DRIVER_TI_CPSW=y -CONFIG_SPI=y -CONFIG_OMAP3_SPI=y -CONFIG_USB=y -CONFIG_USB_MUSB_HOST=y -CONFIG_USB_MUSB_GADGET=y -CONFIG_USB_MUSB_DSPS=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" -CONFIG_USB_GADGET_VENDOR_NUM=0x0451 -CONFIG_USB_GADGET_PRODUCT_NUM=0xd022 -CONFIG_FAT_WRITE=y -CONFIG_LZO=y -CONFIG_OF_LIBFDT=y diff --git a/configs/birdland_bav335b_defconfig b/configs/birdland_bav335b_defconfig deleted file mode 100644 index f5d7e3f50a..0000000000 --- a/configs/birdland_bav335b_defconfig +++ /dev/null @@ -1,69 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_CPU_INIT=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_SPL_GPIO_SUPPORT=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_AM33XX=y -CONFIG_TARGET_BAV335X=y -CONFIG_SPL_MMC_SUPPORT=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL=y -CONFIG_SPL_FS_FAT=y -CONFIG_SPL_LIBDISK_SUPPORT=y -CONFIG_BAV_VERSION=2 -CONFIG_DISTRO_DEFAULTS=y -# CONFIG_USE_BOOTCOMMAND is not set -CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_VERSION_VARIABLE=y -CONFIG_ARCH_MISC_INIT=y -CONFIG_SPL_FS_EXT4=y -CONFIG_SPL_I2C_SUPPORT=y -CONFIG_SPL_MUSB_NEW_SUPPORT=y -# CONFIG_SPL_NAND_SUPPORT is not set -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_POWER_SUPPORT=y -CONFIG_SPL_WATCHDOG_SUPPORT=y -CONFIG_SPL_YMODEM_SUPPORT=y -CONFIG_CMD_SPL=y -CONFIG_CMD_ASKENV=y -CONFIG_CMD_EEPROM=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y -CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_BOOTP_DNS2=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_DFU_MMC=y -CONFIG_DFU_RAM=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_FASTBOOT_BUF_ADDR=0x82000000 -CONFIG_MMC_OMAP_HS=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_SPEED=24000000 -CONFIG_SPI_FLASH_WINBOND=y -CONFIG_PHY_SMSC=y -CONFIG_MII=y -CONFIG_DRIVER_TI_CPSW=y -CONFIG_SPI=y -CONFIG_OMAP3_SPI=y -CONFIG_USB=y -CONFIG_USB_MUSB_HOST=y -CONFIG_USB_MUSB_GADGET=y -CONFIG_USB_MUSB_DSPS=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" -CONFIG_USB_GADGET_VENDOR_NUM=0x0451 -CONFIG_USB_GADGET_PRODUCT_NUM=0xd022 -CONFIG_FAT_WRITE=y -CONFIG_LZO=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h deleted file mode 100644 index c51b850f6d..0000000000 --- a/include/configs/bav335x.h +++ /dev/null @@ -1,475 +0,0 @@ -/* - * bav335x.h - * - * Copyright (c) 2012-2014 Birdland Audio - http://birdland.com/oem - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __CONFIG_BAV335X_H -#define __CONFIG_BAV335X_H - -#include - -#ifndef CONFIG_SPL_BUILD -# define CONFIG_TIMESTAMP -#endif - -#define CONFIG_SYS_BOOTM_LEN (16 << 20) - -#define CONFIG_MACH_TYPE MACH_TYPE_AM335XEVM - -/* Clock Defines */ -#define V_OSCK 24000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK) - -#ifdef CONFIG_MTD_RAW_NAND -#define NANDARGS \ - "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - "nandargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${nandroot} " \ - "rootfstype=${nandrootfstype}\0" \ - "nandroot=ubi0:rootfs rw ubi.mtd=9,2048\0" \ - "nandrootfstype=ubifs rootwait=1\0" \ - "nandboot=echo Booting from nand ...; " \ - "run nandargs; " \ - "nand read ${fdtaddr} u-boot-spl-os; " \ - "nand read ${loadaddr} kernel; " \ - "bootz ${loadaddr} - ${fdtaddr}\0" -#else -#define NANDARGS "" -#endif - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_EXTRA_ENV_SETTINGS \ -DEFAULT_LINUX_BOOT_ENV \ -"boot_fdt=try\0" \ -"bootpart=0:2\0" \ -"bootdir=\0" \ -"fdtdir=/dtbs\0" \ -"bootfile=zImage\0" \ -"fdtfile=undefined\0" \ -"console=ttyO0,115200n8\0" \ -"loadaddr=0x82000000\0" \ -"fdtaddr=0x88000000\0" \ -"rdaddr=0x88080000\0" \ -"initrd_high=0xffffffff\0" \ -"fdt_high=0xffffffff\0" \ -"partitions=" \ - "uuid_disk=${uuid_gpt_disk};" \ - "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \ -"optargs=\0" \ -"cmdline=\0" \ -"mmcdev=0\0" \ -"mmcpart=1\0" \ -"mmcroot=/dev/mmcblk0p2 ro\0" \ -"mmcrootfstype=ext4 rootwait fixrtc\0" \ -"rootpath=/export/rootfs\0" \ -"nfsopts=nolock\0" \ -"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0" \ -"ramroot=/dev/ram0 rw\0" \ -"ramrootfstype=ext2\0" \ -"mmcargs=setenv bootargs console=${console} ${optargs} " \ - "root=${mmcroot} rootfstype=${mmcrootfstype} ${cmdline}\0" \ -"server_ip=192.168.1.100\0" \ -"gw_ip=192.168.1.1\0" \ -"netmask=255.255.255.0\0" \ -"hostname=\0" \ -"device=eth0\0" \ -"autoconf=off\0" \ -"root_dir=/home/userid/targetNFS\0" \ -"nfs_options=,vers=3\0" \ -"nfsrootfstype=ext4 rootwait fixrtc\0" \ -"nfsargs=setenv bootargs console=${console} ${optargs} " \ - "root=/dev/nfs rw rootfstype=${nfsrootfstype} " \ - "nfsroot=${nfsroot} ip=${ip} ${cmdline}\0" \ -"netargs=setenv bootargs console=${console} " \ - "${optargs} root=/dev/nfs " \ - "nfsroot=${serverip}:${rootpath},${nfsopts} rw ip=dhcp\0" \ -"bootenv=uEnv.txt\0" \ -"script=boot.scr\0" \ -"scriptfile=${script}\0" \ -"loadbootscript=load mmc ${bootpart} ${loadaddr} ${scriptfile};\0" \ -"bootscript=echo Running bootscript from mmc${bootpart} ...; " \ - "source ${loadaddr}\0" \ - "loadbootenv=load mmc ${bootpart} ${loadaddr} ${bootenv}\0" \ -"importbootenv=echo Importing environment from mmc ...; " \ - "env import -t -r $loadaddr $filesize\0" \ -"ramargs=setenv bootargs console=${console} " \ - "${optargs} root=${ramroot} rootfstype=${ramrootfstype}\0" \ -"loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ -"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ - "loadrd=load mmc ${bootpart} ${rdaddr} " \ - "${bootdir}/${rdfile}; setenv rdsize ${filesize}\0" \ -"loadfdt=echo loading ${fdtdir}/${fdtfile} ...; " \ - "load mmc ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \ -"mmcboot=mmc dev ${mmcdev}; " \ - "if mmc rescan; then " \ - "gpio set 54;" \ - "setenv bootpart ${mmcdev}:1; " \ - "if test -e mmc ${bootpart} /etc/fstab; then " \ - "setenv mmcpart 1;" \ - "fi; " \ - "echo Checking for: /uEnv.txt ...;" \ - "if test -e mmc ${bootpart} /uEnv.txt; then " \ - "if run loadbootenv; then " \ - "gpio set 55;" \ - "echo Loaded environment from ${bootenv};" \ - "run importbootenv;" \ - "fi;" \ - "echo Checking if uenvcmd is set ...;" \ - "if test -n ${uenvcmd}; then " \ - "gpio set 56; " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "echo Checking if client_ip is set ...;" \ - "if test -n ${client_ip}; then " \ - "if test -n ${dtb}; then " \ - "setenv fdtfile ${dtb};" \ - "echo using ${fdtfile} ...;" \ - "fi;" \ - "gpio set 56; " \ - "if test -n ${uname_r}; then " \ - "echo Running nfsboot_uname_r ...;" \ - "run nfsboot_uname_r;" \ - "fi;" \ - "echo Running nfsboot ...;" \ - "run nfsboot;" \ - "fi;" \ - "fi; " \ - "echo Checking for: /${script} ...;" \ - "if test -e mmc ${bootpart} /${script}; then " \ - "gpio set 55;" \ - "setenv scriptfile ${script};" \ - "run loadbootscript;" \ - "echo Loaded script from ${scriptfile};" \ - "gpio set 56; " \ - "run bootscript;" \ - "fi; " \ - "echo Checking for: /boot/${script} ...;" \ - "if test -e mmc ${bootpart} /boot/${script}; then " \ - "gpio set 55;" \ - "setenv scriptfile /boot/${script};" \ - "run loadbootscript;" \ - "echo Loaded script from ${scriptfile};" \ - "gpio set 56; " \ - "run bootscript;" \ - "fi; " \ - "echo Checking for: /boot/uEnv.txt ...;" \ - "for i in 1 2 3 4 5 6 7 ; do " \ - "setenv mmcpart ${i};" \ - "setenv bootpart ${mmcdev}:${mmcpart};" \ - "if test -e mmc ${bootpart} /boot/uEnv.txt; then " \ - "gpio set 55;" \ - "load mmc ${bootpart} ${loadaddr} " \ - "/boot/uEnv.txt;" \ - "env import -t ${loadaddr} ${filesize};" \ - "echo Loaded environment from /boot/uEnv.txt;" \ - "if test -n ${dtb}; then " \ - "setenv fdtfile ${dtb};" \ - "echo Using: dtb=${fdtfile} ...;" \ - "fi;" \ - "echo Checking if uname_r is set in " \ - "/boot/uEnv.txt...;" \ - "if test -n ${uname_r}; then " \ - "gpio set 56; " \ - "echo Running uname_boot ...;" \ - "setenv mmcroot /dev/mmcblk${mmcdev}" \ - "p${mmcpart} ro;" \ - "run uname_boot;" \ - "fi;" \ - "fi;" \ - "done;" \ - "fi;\0" \ -"netboot=echo Booting from network ...; " \ - "setenv autoload no; " \ - "dhcp; " \ - "tftp ${loadaddr} ${bootfile}; " \ - "tftp ${fdtaddr} ${fdtfile}; " \ - "run netargs; " \ - "bootz ${loadaddr} - ${fdtaddr}\0" \ -"nfsboot=echo Booting from ${server_ip} ...; " \ - "setenv nfsroot ${server_ip}:${root_dir}${nfs_options}; " \ - "setenv ip ${client_ip}:${server_ip}:${gw_ip}:${netmask}:${hostname}" \ - ":${device}:${autoconf}; " \ - "setenv autoload no; " \ - "setenv serverip ${server_ip}; " \ - "setenv ipaddr ${client_ip}; " \ - "tftp ${loadaddr} ${bootfile}; " \ - "tftp ${fdtaddr} dtbs/${fdtfile}; " \ - "run nfsargs; " \ - "bootz ${loadaddr} - ${fdtaddr}\0" \ -"nfsboot_uname_r=echo Booting from ${server_ip} ...; " \ - "setenv nfsroot ${server_ip}:${root_dir}${nfs_options}; " \ - "setenv ip ${client_ip}:${server_ip}:${gw_ip}:${netmask}:${hostname}" \ - ":${device}:${autoconf}; " \ - "setenv autoload no; " \ - "setenv serverip ${server_ip}; " \ - "setenv ipaddr ${client_ip}; " \ - "tftp ${loadaddr} vmlinuz-${uname_r}; " \ - "tftp ${fdtaddr} dtbs/${uname_r}/${fdtfile}; " \ - "run nfsargs; " \ - "bootz ${loadaddr} - ${fdtaddr}\0" \ -"ramboot=echo Booting from ramdisk ...; " \ - "run ramargs; " \ - "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \ -"findfdt="\ - "if test $board_rev = B; then " \ - "setenv fdtfile birdland_bav335b.dtb; " \ - "setenv fdtbase am335x-boneblack; fi; " \ - "if test $board_rev = A; then " \ - "setenv fdtfile birdland_bav335a.dtb; " \ - "setenv fdtbase am335x-boneblack; fi; " \ - "if test $fdtfile = undefined; then " \ - "echo WARNING: Could not determine device tree to use; fi; \0" \ -"uname_boot="\ - "setenv bootdir /boot; " \ - "setenv bootfile vmlinuz-${uname_r}; " \ - "if test -e mmc ${bootpart} ${bootdir}/${bootfile}; then " \ - "echo loading ${bootdir}/${bootfile} ...; "\ - "run loadimage;" \ - "setenv fdtdir /boot/dtbs/${uname_r}; " \ - "if test -e mmc ${bootpart} ${fdtdir}/${fdtfile}; then " \ - "run loadfdt;" \ - "else " \ - "setenv fdtdir /lib/firmware/${uname_r}/device-tree; " \ - "if test -e mmc ${bootpart} ${fdtdir}/" \ - "${fdtfile}; then " \ - "run loadfdt;" \ - "else " \ - "setenv fdtdir /boot/dtb-${uname_r}; " \ - "if test -e mmc ${bootpart} ${fdtdir}" \ - "/${fdtfile}; then " \ - "run loadfdt;" \ - "else " \ - "setenv fdtdir /boot/dtbs; " \ - "if test -e mmc ${bootpart} ${fdtdir}" \ - "/${fdtfile}; then " \ - "run loadfdt;" \ - "else " \ - "echo; echo unable to find " \ - "[${fdtfile}] " \ - "did you name it correctly?" \ - "echo booting fallback " \ - "[/boot/dtbs/" \ - "${uname_r}" \ - "/${fdtbase}.dtb]...;" \ - "setenv fdtdir /boot/dtbs/" \ - "${uname_r}; " \ - "setenv fdtfile " \ - "${fdtbase}.dtb; " \ - "run loadfdt;" \ - "fi;" \ - "fi;" \ - "fi;" \ - "fi;" \ - "fi; " \ - "setenv rdfile initrd.img-${uname_r}; " \ - "if test -e mmc ${bootpart} ${bootdir}/${rdfile}; then " \ - "echo loading ${bootdir}/${rdfile} ...; "\ - "run loadrd;" \ - "if test -n ${uuid}; then " \ - "setenv mmcroot UUID=${uuid} ro;" \ - "fi;" \ - "run mmcargs;" \ - "echo debug: [${bootargs}] ... ;" \ - "echo debug: [bootz ${loadaddr} ${rdaddr}:${rdsize} " \ - "${fdtaddr}] ... ;" \ - "bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}; " \ - "else " \ - "run mmcargs;" \ - "echo debug: [${bootargs}] ... ;" \ - "echo debug: [bootz ${loadaddr} - ${fdtaddr}] ... ;" \ - "bootz ${loadaddr} - ${fdtaddr}; " \ - "fi;" \ -"fi;\0" \ - NANDARGS \ - DFUARGS -#endif - -#define CONFIG_BOOTCOMMAND \ - "gpio set 53; " \ - "i2c mw 0x24 1 0x3e; " \ - "run findfdt; " \ - "setenv mmcdev 0; " \ - "setenv bootpart 0:1; " \ - "run mmcboot;" \ - "gpio clear 56; " \ - "gpio clear 55; " \ - "gpio clear 54; " \ - "setenv mmcdev 1; " \ - "setenv bootpart 1:1; " \ - "run mmcboot;" - -/* NS16550 Configuration */ -#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */ -#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ -#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */ -#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */ -#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ -#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ - -#define CONFIG_ENV_EEPROM_IS_ON_I2C -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 - -/* PMIC support */ -#define CONFIG_POWER_TPS65217 -#define CONFIG_POWER_TPS65910 - -/* SPL */ -#ifndef CONFIG_NOR_BOOT -/* Bootcount using the RTC block */ -#define CONFIG_SYS_BOOTCOUNT_BE - -/* USB gadget RNDIS */ -#endif - -#ifdef CONFIG_MTD_RAW_NAND -/* NAND: device related configs */ -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ - CONFIG_SYS_NAND_PAGE_SIZE) -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) -/* NAND: driver related configs */ -#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS -#define CONFIG_SYS_NAND_ECCPOS { \ - 2, 3, 4, 5, 6, 7, 8, 9, \ - 10, 11, 12, 13, 14, 15, 16, 17, \ - 18, 19, 20, 21, 22, 23, 24, 25, \ - 26, 27, 28, 29, 30, 31, 32, 33, \ - 34, 35, 36, 37, 38, 39, 40, 41, \ - 42, 43, 44, 45, 46, 47, 48, 49, \ - 50, 51, 52, 53, 54, 55, 56, 57, } - -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 14 -#define CONFIG_SYS_NAND_ONFI_DETECTION -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000 -#define CONFIG_SYS_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -/* NAND: SPL related configs */ -#ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */ -#endif -#endif /* !CONFIG_MTD_RAW_NAND */ - -/* - * For NOR boot, we must set this to the start of where NOR is mapped - * in memory. - */ - -/* - * USB configuration. We enable MUSB support, both for host and for - * gadget. We set USB0 as peripheral and USB1 as host, based on the - * board schematic and physical port wired to each. Then for host we - * add mass storage support and for gadget we add both RNDIS ethernet - * and DFU. - */ -#define CONFIG_AM335X_USB0 -#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL -#define CONFIG_AM335X_USB1 -#define CONFIG_AM335X_USB1_MODE MUSB_HOST - -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USB_ETHER) -/* disable host part of MUSB in SPL */ -/* disable EFI partitions and partition UUID support */ -#endif - -/* USB Device Firmware Update support */ -#ifndef CONFIG_SPL_BUILD -#define DFU_ALT_INFO_MMC \ - "dfu_alt_info_mmc=" \ - "boot part 0 1;" \ - "rootfs part 0 2;" \ - "MLO fat 0 1;" \ - "MLO.raw raw 0x100 0x100;" \ - "u-boot.img.raw raw 0x300 0x400;" \ - "spl-os-args.raw raw 0x80 0x80;" \ - "spl-os-image.raw raw 0x900 0x2000;" \ - "spl-os-args fat 0 1;" \ - "spl-os-image fat 0 1;" \ - "u-boot.img fat 0 1;" \ - "uEnv.txt fat 0 1\0" -#ifdef CONFIG_MTD_RAW_NAND -#define DFU_ALT_INFO_NAND \ - "dfu_alt_info_nand=" \ - "SPL part 0 1;" \ - "SPL.backup1 part 0 2;" \ - "SPL.backup2 part 0 3;" \ - "SPL.backup3 part 0 4;" \ - "u-boot part 0 5;" \ - "u-boot-spl-os part 0 6;" \ - "kernel part 0 8;" \ - "rootfs part 0 9\0" -#else -#define DFU_ALT_INFO_NAND "" -#endif -#define DFU_ALT_INFO_RAM \ - "dfu_alt_info_ram=" \ - "kernel ram 0x80200000 0xD80000;" \ - "fdt ram 0x80F80000 0x80000;" \ - "ramdisk ram 0x81000000 0x4000000\0" -#define DFUARGS \ - "dfu_alt_info_emmc=rawemmc raw 0 3751936\0" \ - DFU_ALT_INFO_MMC \ - DFU_ALT_INFO_RAM \ - DFU_ALT_INFO_NAND -#endif - -/* - * Default to using SPI for environment, etc. - * 0x000000 - 0x020000 : SPL (128KiB) - * 0x020000 - 0x0A0000 : U-Boot (512KiB) - * 0x0A0000 - 0x0BFFFF : First copy of U-Boot Environment (128KiB) - * 0x0C0000 - 0x0DFFFF : Second copy of U-Boot Environment (128KiB) - * 0x0E0000 - 0x442000 : Linux Kernel - * 0x442000 - 0x800000 : Userland - */ -#if defined(CONFIG_SPI_BOOT) -/* SPL related */ -#elif defined(CONFIG_EMMC_BOOT) -#define CONFIG_SYS_MMC_ENV_DEV 1 -#define CONFIG_SYS_MMC_ENV_PART 2 -#endif - -/* SPI flash. */ - -/* Network. */ - -/* - * NOR Size = 16 MiB - * Number of Sectors/Blocks = 128 - * Sector Size = 128 KiB - * Word length = 16 bits - * Default layout: - * 0x000000 - 0x07FFFF : U-Boot (512 KiB) - * 0x080000 - 0x09FFFF : First copy of U-Boot Environment (128 KiB) - * 0x0A0000 - 0x0BFFFF : Second copy of U-Boot Environment (128 KiB) - * 0x0C0000 - 0x4BFFFF : Linux Kernel (4 MiB) - * 0x4C0000 - 0xFFFFFF : Userland (11 MiB + 256 KiB) - */ -#if defined(CONFIG_NOR) -#define CONFIG_SYS_MAX_FLASH_SECT 128 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_FLASH_BASE (0x08000000) -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#define CONFIG_SYS_FLASH_SIZE 0x01000000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -/* Reduce SPL size by removing unlikey targets */ -#endif /* NOR support */ - -#endif /* ! __CONFIG_AM335X_EVM_H */ -- 2.39.5