From 36ed8fbf4089e4dd8c24d002171aec88792922b4 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Thu, 27 Jul 2023 13:58:54 -0500 Subject: [PATCH] doc: board: ti: am62x_sk: Convert switch settings to list tables Use list tables to map up the dip switch settings Signed-off-by: Nishanth Menon --- doc/board/ti/am62x_sk.rst | 38 +++++++++++++++++++++++++++----------- 1 file changed, 27 insertions(+), 11 deletions(-) diff --git a/doc/board/ti/am62x_sk.rst b/doc/board/ti/am62x_sk.rst index 16a4ab4dcf..906d7ceb31 100644 --- a/doc/board/ti/am62x_sk.rst +++ b/doc/board/ti/am62x_sk.rst @@ -213,16 +213,32 @@ The following table shows some common boot modes used on AM62 platform. More details can be found in the Technical Reference Manual: https://www.ti.com/lit/pdf/spruiv7 under the `Boot Mode Pins` section. -*Boot Modes* - -============ ============= ============= -Switch Label SW2: 12345678 SW3: 12345678 -============ ============= ============= -SD 01000000 11000010 -OSPI 00000000 11001110 -EMMC 00000000 11010010 -UART 00000000 11011100 -USB DFU 00000000 11001010 -============ ============= ============= +.. list-table:: Boot Modes + :widths: 16 16 16 + :header-rows: 1 + + * - Switch Label + - SW2: 12345678 + - SW3: 12345678 + + * - SD + - 01000000 + - 11000010 + + * - OSPI + - 00000000 + - 11001110 + + * - EMMC + - 00000000 + - 11010010 + + * - UART + - 00000000 + - 11011100 + + * - USB DFU + - 00000000 + - 11001010 For SW2 and SW1, the switch state in the "ON" position = 1. -- 2.39.5