From 36adc9a06f64bffc327457418b5b6506ad1d18b4 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 26 Apr 2019 09:36:23 -0300 Subject: [PATCH] pico-imx7d: README: Adjust the binary name after DM conversion After the conversion to DM the U-Boot binary is called u-boot-dtb.imx, so fix the README file accordingly. Signed-off-by: Fabio Estevam Acked-by: Joris Offouga --- board/technexion/pico-imx7d/README | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/board/technexion/pico-imx7d/README b/board/technexion/pico-imx7d/README index f21d8301cb..6aa0d25af5 100644 --- a/board/technexion/pico-imx7d/README +++ b/board/technexion/pico-imx7d/README @@ -11,7 +11,7 @@ $ make mrproper $ make pico-imx7d_defconfig $ make -This generates the SPL and u-boot.img binaries. +This generates the SPL and u-boot-dtb.img binaries. 1. Loading U-Boot via USB Serial Download Protocol @@ -32,15 +32,15 @@ to use an externally powered USB hub between the board and the host computer. Open a terminal program such as minicom. -Copy SPL and u-boot.img to the imx_usb_loader folder. +Copy SPL and u-boot-dtb.img to the imx_usb_loader folder. Load the SPL binary via USB: $ sudo ./imx_usb SPL -Load the u-boot.img binary via USB: +Load the u-boot-dtb.img binary via USB: -$ sudo ./imx_usb u-boot.img +$ sudo ./imx_usb u-boot-dtb.img Then U-Boot starts and its messages appear in the console program. @@ -55,11 +55,11 @@ Run the DFU agent so we can flash the new images using dfu-util tool: => dfu 0 mmc 0 -Flash SPL and u-boot.img into the eMMC running the following commands on a PC: +Flash SPL and u-boot-dtb.img into the eMMC running the following commands on a PC: $ sudo dfu-util -D SPL -a spl -$ sudo dfu-util -D u-boot.img -a u-boot +$ sudo dfu-util -D u-boot-dtb.img -a u-boot Remove power from the pico board. -- 2.39.5