From 1d87904c159bd2773c47e72befa18af8720f3177 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Marek=20Beh=C3=BAn?= Date: Wed, 27 Apr 2022 12:41:51 +0200 Subject: [PATCH] net: mvneta: Don't register MDIO bus MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit This MDIO bus is now handled by a proper mvmdio DM driver. Remove it from mvneta. Signed-off-by: Marek Behún Reviewed-by: Ramon Fried Reviewed-by: Stefan Roese --- drivers/net/mvneta.c | 143 +------------------------------------------ 1 file changed, 2 insertions(+), 141 deletions(-) diff --git a/drivers/net/mvneta.c b/drivers/net/mvneta.c index 83e9629138..19f8145fc0 100644 --- a/drivers/net/mvneta.c +++ b/drivers/net/mvneta.c @@ -288,7 +288,6 @@ struct mvneta_port { struct gpio_desc phy_reset_gpio; struct gpio_desc sfp_tx_disable_gpio; #endif - struct mii_dev *bus; }; /* The mvneta_tx_desc and mvneta_rx_desc structures describe the @@ -414,15 +413,6 @@ static struct buffer_location buffer_loc; */ #define BD_SPACE (1 << 20) -/* - * Dummy implementation that can be overwritten by a board - * specific function - */ -__weak int board_network_enable(struct mii_dev *bus) -{ - return 0; -} - /* Utility/helper methods */ /* Write helper method */ @@ -1421,118 +1411,6 @@ static int mvneta_init(struct udevice *dev) /* U-Boot only functions follow here */ -/* SMI / MDIO functions */ - -static int smi_wait_ready(struct mvneta_port *pp) -{ - u32 timeout = MVNETA_SMI_TIMEOUT; - u32 smi_reg; - - /* wait till the SMI is not busy */ - do { - /* read smi register */ - smi_reg = mvreg_read(pp, MVNETA_SMI); - if (timeout-- == 0) { - printf("Error: SMI busy timeout\n"); - return -EFAULT; - } - } while (smi_reg & MVNETA_SMI_BUSY); - - return 0; -} - -/* - * mvneta_mdio_read - miiphy_read callback function. - * - * Returns 16bit phy register value, or 0xffff on error - */ -static int mvneta_mdio_read(struct mii_dev *bus, int addr, int devad, int reg) -{ - struct mvneta_port *pp = bus->priv; - u32 smi_reg; - u32 timeout; - - /* check parameters */ - if (addr > MVNETA_PHY_ADDR_MASK) { - printf("Error: Invalid PHY address %d\n", addr); - return -EFAULT; - } - - if (reg > MVNETA_PHY_REG_MASK) { - printf("Err: Invalid register offset %d\n", reg); - return -EFAULT; - } - - /* wait till the SMI is not busy */ - if (smi_wait_ready(pp) < 0) - return -EFAULT; - - /* fill the phy address and regiser offset and read opcode */ - smi_reg = (addr << MVNETA_SMI_DEV_ADDR_OFFS) - | (reg << MVNETA_SMI_REG_ADDR_OFFS) - | MVNETA_SMI_OPCODE_READ; - - /* write the smi register */ - mvreg_write(pp, MVNETA_SMI, smi_reg); - - /* wait till read value is ready */ - timeout = MVNETA_SMI_TIMEOUT; - - do { - /* read smi register */ - smi_reg = mvreg_read(pp, MVNETA_SMI); - if (timeout-- == 0) { - printf("Err: SMI read ready timeout\n"); - return -EFAULT; - } - } while (!(smi_reg & MVNETA_SMI_READ_VALID)); - - /* Wait for the data to update in the SMI register */ - for (timeout = 0; timeout < MVNETA_SMI_TIMEOUT; timeout++) - ; - - return mvreg_read(pp, MVNETA_SMI) & MVNETA_SMI_DATA_MASK; -} - -/* - * mvneta_mdio_write - miiphy_write callback function. - * - * Returns 0 if write succeed, -EINVAL on bad parameters - * -ETIME on timeout - */ -static int mvneta_mdio_write(struct mii_dev *bus, int addr, int devad, int reg, - u16 value) -{ - struct mvneta_port *pp = bus->priv; - u32 smi_reg; - - /* check parameters */ - if (addr > MVNETA_PHY_ADDR_MASK) { - printf("Error: Invalid PHY address %d\n", addr); - return -EFAULT; - } - - if (reg > MVNETA_PHY_REG_MASK) { - printf("Err: Invalid register offset %d\n", reg); - return -EFAULT; - } - - /* wait till the SMI is not busy */ - if (smi_wait_ready(pp) < 0) - return -EFAULT; - - /* fill the phy addr and reg offset and write opcode and data */ - smi_reg = value << MVNETA_SMI_DATA_OFFS; - smi_reg |= (addr << MVNETA_SMI_DEV_ADDR_OFFS) - | (reg << MVNETA_SMI_REG_ADDR_OFFS); - smi_reg &= ~MVNETA_SMI_OPCODE_READ; - - /* write the smi register */ - mvreg_write(pp, MVNETA_SMI, smi_reg); - - return 0; -} - static int mvneta_start(struct udevice *dev) { struct mvneta_port *pp = dev_get_priv(dev); @@ -1690,10 +1568,9 @@ static int mvneta_probe(struct udevice *dev) #endif void *blob = (void *)gd->fdt_blob; int node = dev_of_offset(dev); - struct mii_dev *bus; void *bd_space; - int ret; int fl_node; + int ret; /* * Allocate buffer area for descs and rx_buffers. This is only @@ -1739,22 +1616,6 @@ static int mvneta_probe(struct udevice *dev) pp->fixed_link = true; } - bus = mdio_alloc(); - if (!bus) { - printf("Failed to allocate MDIO bus\n"); - return -ENOMEM; - } - - bus->read = mvneta_mdio_read; - bus->write = mvneta_mdio_write; - snprintf(bus->name, sizeof(bus->name), dev->name); - bus->priv = (void *)pp; - pp->bus = bus; - - ret = mdio_register(bus); - if (ret) - return ret; - #if CONFIG_IS_ENABLED(DM_GPIO) ret = dev_read_phandle_with_args(dev, "sfp", NULL, 0, 0, &sfp_args); if (!ret && ofnode_is_enabled(sfp_args.node)) @@ -1774,7 +1635,7 @@ static int mvneta_probe(struct udevice *dev) dm_gpio_set_value(&pp->sfp_tx_disable_gpio, 0); #endif - return board_network_enable(bus); + return 0; } static void mvneta_stop(struct udevice *dev) -- 2.39.5