From 1d255904c306c6fde694a0abb433192ebc01655a Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 9 Jun 2019 18:46:41 +0200 Subject: [PATCH] ARM: dts: imx: imx53: Synchronize iMX53 DT with Linux Synchronize iMX53 device tree from Linux next-20190607 3f310e51ceb1 , this is needed to get NFC, UART, USBOTG DT nodes. Signed-off-by: Marek Vasut Cc: Fabio Estevam Cc: Stefano Babic --- arch/arm/dts/imx53.dtsi | 745 +++++++++++++++++++++++++++++++--------- 1 file changed, 588 insertions(+), 157 deletions(-) diff --git a/arch/arm/dts/imx53.dtsi b/arch/arm/dts/imx53.dtsi index 211ff5f69e..ed341cfd9d 100644 --- a/arch/arm/dts/imx53.dtsi +++ b/arch/arm/dts/imx53.dtsi @@ -1,17 +1,8 @@ -/* - * Copyright 2016 Beckhoff Automation - * Copyright 2011 Freescale Semiconductor, Inc. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include "skeleton.dtsi" +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2011 Freescale Semiconductor, Inc. +// Copyright 2011 Linaro Ltd. + #include "imx53-pinfunc.h" #include #include @@ -19,8 +10,17 @@ #include / { + #address-cells = <1>; + #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + */ + chosen {}; + aliases { - serial1 = &uart2; + ethernet0 = &fec; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -36,7 +36,45 @@ mmc1 = &esdhc2; mmc2 = &esdhc3; mmc3 = &esdhc4; - usb1 = &usbh1; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &cspi; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a8"; + reg = <0x0>; + clocks = <&clks IMX5_CLK_ARM>; + clock-latency = <61036>; + voltage-tolerance = <5>; + operating-points = < + /* kHz */ + 166666 850000 + 400000 900000 + 800000 1050000 + 1000000 1200000 + 1200000 1300000 + >; + }; + }; + + display-subsystem { + compatible = "fsl,imx-display-subsystem"; + ports = <&ipu_di0>, <&ipu_di1>; + }; + + capture_subsystem { + compatible = "fsl,imx-capture-subsystem"; + ports = <&ipu_csi0>, <&ipu_csi1>; }; tzic: tz-interrupt-controller@fffc000 { @@ -46,13 +84,143 @@ reg = <0x0fffc000 0x4000>; }; + clocks { + ckil { + compatible = "fsl,imx-ckil", "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + ckih1 { + compatible = "fsl,imx-ckih1", "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <22579200>; + }; + + ckih2 { + compatible = "fsl,imx-ckih2", "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + osc { + compatible = "fsl,imx-osc", "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + }; + + pmu: pmu { + compatible = "arm,cortex-a8-pmu"; + interrupt-parent = <&tzic>; + interrupts = <77>; + }; + + usbphy0: usbphy-0 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX5_CLK_USB_PHY1_GATE>; + clock-names = "main_clk"; + #phy-cells = <0>; + status = "okay"; + }; + + usbphy1: usbphy-1 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX5_CLK_USB_PHY2_GATE>; + clock-names = "main_clk"; + #phy-cells = <0>; + status = "okay"; + }; + soc { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; interrupt-parent = <&tzic>; ranges; - u-boot,dm-pre-reloc; + + sata: sata@10000000 { + compatible = "fsl,imx53-ahci"; + reg = <0x10000000 0x1000>; + interrupts = <28>; + clocks = <&clks IMX5_CLK_SATA_GATE>, + <&clks IMX5_CLK_SATA_REF>, + <&clks IMX5_CLK_AHB>; + clock-names = "sata", "sata_ref", "ahb"; + status = "disabled"; + }; + + ipu: ipu@18000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx53-ipu"; + reg = <0x18000000 0x08000000>; + interrupts = <11 10>; + clocks = <&clks IMX5_CLK_IPU_GATE>, + <&clks IMX5_CLK_IPU_DI0_GATE>, + <&clks IMX5_CLK_IPU_DI1_GATE>; + clock-names = "bus", "di0", "di1"; + resets = <&src 2>; + + ipu_csi0: port@0 { + reg = <0>; + + ipu_csi0_from_parallel_sensor: endpoint { + }; + }; + + ipu_csi1: port@1 { + reg = <1>; + + ipu_csi1_from_parallel_sensor: endpoint { + }; + }; + + ipu_di0: port@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + ipu_di0_disp0: endpoint@0 { + reg = <0>; + }; + + ipu_di0_lvds0: endpoint@1 { + reg = <1>; + remote-endpoint = <&lvds0_in>; + }; + }; + + ipu_di1: port@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + ipu_di1_disp1: endpoint@0 { + reg = <0>; + }; + + ipu_di1_lvds1: endpoint@1 { + reg = <1>; + remote-endpoint = <&lvds1_in>; + }; + + ipu_di1_tve: endpoint@2 { + reg = <2>; + remote-endpoint = <&tve_in>; + }; + }; + }; + + gpu: gpu@30000000 { + compatible = "amd,imageon-200.0", "amd,imageon"; + reg = <0x30000000 0x20000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = <12>; + interrupt-names = "kgsl_3d0_irq"; + clocks = <&clks IMX5_CLK_GPU3D_GATE>, <&clks IMX5_CLK_GARB_GATE>; + clock-names = "core_clk", "mem_iface_clk"; + }; aips@50000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; @@ -92,6 +260,47 @@ status = "disabled"; }; + uart3: serial@5000c000 { + compatible = "fsl,imx53-uart", "fsl,imx21-uart"; + reg = <0x5000c000 0x4000>; + interrupts = <33>; + clocks = <&clks IMX5_CLK_UART3_IPG_GATE>, + <&clks IMX5_CLK_UART3_PER_GATE>; + clock-names = "ipg", "per"; + dmas = <&sdma 42 4 0>, <&sdma 43 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + ecspi1: spi@50010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi"; + reg = <0x50010000 0x4000>; + interrupts = <36>; + clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>, + <&clks IMX5_CLK_ECSPI1_PER_GATE>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ssi2: ssi@50014000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx53-ssi", + "fsl,imx51-ssi", + "fsl,imx21-ssi"; + reg = <0x50014000 0x4000>; + interrupts = <30>; + clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>, + <&clks IMX5_CLK_SSI2_ROOT_GATE>; + clock-names = "ipg", "baud"; + dmas = <&sdma 24 1 0>, + <&sdma 25 1 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + status = "disabled"; + }; + esdhc3: esdhc@50020000 { compatible = "fsl,imx53-esdhc"; reg = <0x50020000 0x4000>; @@ -117,25 +326,18 @@ }; }; - iomuxc: iomuxc@53fa8000 { - compatible = "fsl,imx53-iomuxc"; - reg = <0x53fa8000 0x4000>; - }; - - gpr: iomuxc-gpr@53fa8000 { - compatible = "fsl,imx53-iomuxc-gpr", "syscon"; - reg = <0x53fa8000 0xc>; + aipstz1: bridge@53f00000 { + compatible = "fsl,imx53-aipstz"; + reg = <0x53f00000 0x60>; }; - uart2: serial@53fc0000 { - compatible = "fsl,imx7d-uart", "fsl,imx53-uart", "fsl,imx21-uart"; - reg = <0x53fc0000 0x4000>; - interrupts = <32>; - clocks = <&clks IMX5_CLK_UART2_IPG_GATE>, - <&clks IMX5_CLK_UART2_PER_GATE>; - clock-names = "ipg", "per"; - dmas = <&sdma 12 4 0>, <&sdma 13 4 0>; - dma-names = "rx", "tx"; + usbotg: usb@53f80000 { + compatible = "fsl,imx53-usb", "fsl,imx27-usb"; + reg = <0x53f80000 0x0200>; + interrupts = <18>; + clocks = <&clks IMX5_CLK_USBOH3_GATE>; + fsl,usbmisc = <&usbmisc 0>; + fsl,usbphy = <&usbphy0>; status = "disabled"; }; @@ -144,15 +346,37 @@ reg = <0x53f80200 0x0200>; interrupts = <14>; clocks = <&clks IMX5_CLK_USBOH3_GATE>; + fsl,usbmisc = <&usbmisc 1>; + fsl,usbphy = <&usbphy1>; dr_mode = "host"; status = "disabled"; }; - clks: ccm@53fd4000{ - compatible = "fsl,imx53-ccm"; - reg = <0x53fd4000 0x4000>; - interrupts = <0 71 0x04 0 72 0x04>; - #clock-cells = <1>; + usbh2: usb@53f80400 { + compatible = "fsl,imx53-usb", "fsl,imx27-usb"; + reg = <0x53f80400 0x0200>; + interrupts = <16>; + clocks = <&clks IMX5_CLK_USBOH3_GATE>; + fsl,usbmisc = <&usbmisc 2>; + dr_mode = "host"; + status = "disabled"; + }; + + usbh3: usb@53f80600 { + compatible = "fsl,imx53-usb", "fsl,imx27-usb"; + reg = <0x53f80600 0x0200>; + interrupts = <17>; + clocks = <&clks IMX5_CLK_USBOH3_GATE>; + fsl,usbmisc = <&usbmisc 3>; + dr_mode = "host"; + status = "disabled"; + }; + + usbmisc: usbmisc@53f80800 { + #index-cells = <1>; + compatible = "fsl,imx53-usbmisc"; + reg = <0x53f80800 0x200>; + clocks = <&clks IMX5_CLK_USBOH3_GATE>; }; gpio1: gpio@53f84000 { @@ -195,6 +419,188 @@ #interrupt-cells = <2>; }; + kpp: kpp@53f94000 { + compatible = "fsl,imx53-kpp", "fsl,imx21-kpp"; + reg = <0x53f94000 0x4000>; + interrupts = <60>; + clocks = <&clks IMX5_CLK_DUMMY>; + status = "disabled"; + }; + + wdog1: wdog@53f98000 { + compatible = "fsl,imx53-wdt", "fsl,imx21-wdt"; + reg = <0x53f98000 0x4000>; + interrupts = <58>; + clocks = <&clks IMX5_CLK_DUMMY>; + }; + + wdog2: wdog@53f9c000 { + compatible = "fsl,imx53-wdt", "fsl,imx21-wdt"; + reg = <0x53f9c000 0x4000>; + interrupts = <59>; + clocks = <&clks IMX5_CLK_DUMMY>; + status = "disabled"; + }; + + gpt: timer@53fa0000 { + compatible = "fsl,imx53-gpt", "fsl,imx31-gpt"; + reg = <0x53fa0000 0x4000>; + interrupts = <39>; + clocks = <&clks IMX5_CLK_GPT_IPG_GATE>, + <&clks IMX5_CLK_GPT_HF_GATE>; + clock-names = "ipg", "per"; + }; + + srtc: rtc@53fa4000 { + compatible = "fsl,imx53-rtc"; + reg = <0x53fa4000 0x4000>; + interrupts = <24>; + clocks = <&clks IMX5_CLK_SRTC_GATE>; + }; + + iomuxc: iomuxc@53fa8000 { + compatible = "fsl,imx53-iomuxc"; + reg = <0x53fa8000 0x4000>; + }; + + gpr: iomuxc-gpr@53fa8000 { + compatible = "fsl,imx53-iomuxc-gpr", "syscon"; + reg = <0x53fa8000 0xc>; + }; + + ldb: ldb@53fa8008 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx53-ldb"; + reg = <0x53fa8008 0x4>; + gpr = <&gpr>; + clocks = <&clks IMX5_CLK_LDB_DI0_SEL>, + <&clks IMX5_CLK_LDB_DI1_SEL>, + <&clks IMX5_CLK_IPU_DI0_SEL>, + <&clks IMX5_CLK_IPU_DI1_SEL>, + <&clks IMX5_CLK_LDB_DI0_GATE>, + <&clks IMX5_CLK_LDB_DI1_GATE>; + clock-names = "di0_pll", "di1_pll", + "di0_sel", "di1_sel", + "di0", "di1"; + status = "disabled"; + + lvds-channel@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + status = "disabled"; + + port@0 { + reg = <0>; + + lvds0_in: endpoint { + remote-endpoint = <&ipu_di0_lvds0>; + }; + }; + + port@2 { + reg = <2>; + }; + }; + + lvds-channel@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + status = "disabled"; + + port@1 { + reg = <1>; + + lvds1_in: endpoint { + remote-endpoint = <&ipu_di1_lvds1>; + }; + }; + + port@2 { + reg = <2>; + }; + }; + }; + + pwm1: pwm@53fb4000 { + #pwm-cells = <2>; + compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; + reg = <0x53fb4000 0x4000>; + clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>, + <&clks IMX5_CLK_PWM1_HF_GATE>; + clock-names = "ipg", "per"; + interrupts = <61>; + }; + + pwm2: pwm@53fb8000 { + #pwm-cells = <2>; + compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; + reg = <0x53fb8000 0x4000>; + clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>, + <&clks IMX5_CLK_PWM2_HF_GATE>; + clock-names = "ipg", "per"; + interrupts = <94>; + }; + + uart1: serial@53fbc000 { + compatible = "fsl,imx53-uart", "fsl,imx21-uart"; + reg = <0x53fbc000 0x4000>; + interrupts = <31>; + clocks = <&clks IMX5_CLK_UART1_IPG_GATE>, + <&clks IMX5_CLK_UART1_PER_GATE>; + clock-names = "ipg", "per"; + dmas = <&sdma 18 4 0>, <&sdma 19 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart2: serial@53fc0000 { + compatible = "fsl,imx53-uart", "fsl,imx21-uart"; + reg = <0x53fc0000 0x4000>; + interrupts = <32>; + clocks = <&clks IMX5_CLK_UART2_IPG_GATE>, + <&clks IMX5_CLK_UART2_PER_GATE>; + clock-names = "ipg", "per"; + dmas = <&sdma 12 4 0>, <&sdma 13 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + can1: can@53fc8000 { + compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan"; + reg = <0x53fc8000 0x4000>; + interrupts = <82>; + clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, + <&clks IMX5_CLK_CAN1_SERIAL_GATE>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + can2: can@53fcc000 { + compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan"; + reg = <0x53fcc000 0x4000>; + interrupts = <83>; + clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>, + <&clks IMX5_CLK_CAN2_SERIAL_GATE>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + src: src@53fd0000 { + compatible = "fsl,imx53-src", "fsl,imx51-src"; + reg = <0x53fd0000 0x4000>; + #reset-cells = <1>; + }; + + clks: ccm@53fd4000{ + compatible = "fsl,imx53-ccm"; + reg = <0x53fd4000 0x4000>; + interrupts = <0 71 0x04 0 72 0x04>; + #clock-cells = <1>; + }; + gpio5: gpio@53fdc000 { compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; reg = <0x53fdc000 0x4000>; @@ -234,6 +640,18 @@ clocks = <&clks IMX5_CLK_I2C3_GATE>; status = "disabled"; }; + + uart4: serial@53ff0000 { + compatible = "fsl,imx53-uart", "fsl,imx21-uart"; + reg = <0x53ff0000 0x4000>; + interrupts = <13>; + clocks = <&clks IMX5_CLK_UART4_IPG_GATE>, + <&clks IMX5_CLK_UART4_PER_GATE>; + clock-names = "ipg", "per"; + dmas = <&sdma 2 4 0>, <&sdma 3 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; }; aips@60000000 { /* AIPS2 */ @@ -243,25 +661,74 @@ reg = <0x60000000 0x10000000>; ranges; + aipstz2: bridge@63f00000 { + compatible = "fsl,imx53-aipstz"; + reg = <0x63f00000 0x60>; + }; + + iim: iim@63f98000 { + compatible = "fsl,imx53-iim", "fsl,imx27-iim"; + reg = <0x63f98000 0x4000>; + interrupts = <69>; + clocks = <&clks IMX5_CLK_IIM_GATE>; + }; + + uart5: serial@63f90000 { + compatible = "fsl,imx53-uart", "fsl,imx21-uart"; + reg = <0x63f90000 0x4000>; + interrupts = <86>; + clocks = <&clks IMX5_CLK_UART5_IPG_GATE>, + <&clks IMX5_CLK_UART5_PER_GATE>; + clock-names = "ipg", "per"; + dmas = <&sdma 16 4 0>, <&sdma 17 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + tigerp: tigerp@63fa0000 { + compatible = "fsl,imx53-tigerp", "fsl,imx51-tigerp"; + reg = <0x63fa0000 0x28>; + }; + + owire: owire@63fa4000 { + compatible = "fsl,imx53-owire", "fsl,imx21-owire"; + reg = <0x63fa4000 0x4000>; + clocks = <&clks IMX5_CLK_OWIRE_GATE>; + status = "disabled"; + }; + + ecspi2: spi@63fac000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi"; + reg = <0x63fac000 0x4000>; + interrupts = <37>; + clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>, + <&clks IMX5_CLK_ECSPI2_PER_GATE>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + sdma: sdma@63fb0000 { compatible = "fsl,imx53-sdma", "fsl,imx35-sdma"; reg = <0x63fb0000 0x4000>; interrupts = <6>; clocks = <&clks IMX5_CLK_SDMA_GATE>, - <&clks IMX5_CLK_SDMA_GATE>; + <&clks IMX5_CLK_AHB>; clock-names = "ipg", "ahb"; #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; }; - fec: ethernet@63fec000 { - compatible = "fsl,imx53-fec", "fsl,imx25-fec"; - reg = <0x63fec000 0x4000>; - interrupts = <87>; - clocks = <&clks IMX5_CLK_FEC_GATE>, - <&clks IMX5_CLK_FEC_GATE>, - <&clks IMX5_CLK_FEC_GATE>; - clock-names = "ipg", "ahb", "ptp"; + cspi: spi@63fc0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx53-cspi", "fsl,imx35-cspi"; + reg = <0x63fc0000 0x4000>; + interrupts = <38>; + clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>, + <&clks IMX5_CLK_CSPI_IPG_GATE>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -284,66 +751,65 @@ clocks = <&clks IMX5_CLK_I2C1_GATE>; status = "disabled"; }; - }; - - ipu: ipu@18000000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx53-ipu"; - reg = <0x18000000 0x08000000>; - interrupts = <11 10>; - clocks = <&clks IMX5_CLK_IPU_GATE>, - <&clks IMX5_CLK_IPU_DI0_GATE>, - <&clks IMX5_CLK_IPU_DI1_GATE>; - clock-names = "bus", "di0", "di1"; - resets = <&src 2>; - u-boot,dm-pre-reloc; - ipu_csi0: port@0 { - reg = <0>; + ssi1: ssi@63fcc000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx53-ssi", "fsl,imx51-ssi", + "fsl,imx21-ssi"; + reg = <0x63fcc000 0x4000>; + interrupts = <29>; + clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>, + <&clks IMX5_CLK_SSI1_ROOT_GATE>; + clock-names = "ipg", "baud"; + dmas = <&sdma 28 0 0>, + <&sdma 29 0 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + status = "disabled"; }; - ipu_csi1: port@1 { - reg = <1>; + audmux: audmux@63fd0000 { + compatible = "fsl,imx53-audmux", "fsl,imx31-audmux"; + reg = <0x63fd0000 0x4000>; + status = "disabled"; }; - ipu_di0: port@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - - ipu_di0_disp0: endpoint@0 { - reg = <0>; - }; - - ipu_di0_lvds0: endpoint@1 { - reg = <1>; - remote-endpoint = <&lvds0_in>; - }; + nfc: nand@63fdb000 { + compatible = "fsl,imx53-nand"; + reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>; + interrupts = <8>; + clocks = <&clks IMX5_CLK_NFC_GATE>; + status = "disabled"; }; - ipu_di1: port@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - - ipu_di1_disp1: endpoint@0 { - reg = <0>; - }; - - ipu_di1_lvds1: endpoint@1 { - reg = <1>; - remote-endpoint = <&lvds1_in>; - }; + ssi3: ssi@63fe8000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx53-ssi", "fsl,imx51-ssi", + "fsl,imx21-ssi"; + reg = <0x63fe8000 0x4000>; + interrupts = <96>; + clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>, + <&clks IMX5_CLK_SSI3_ROOT_GATE>; + clock-names = "ipg", "baud"; + dmas = <&sdma 46 0 0>, + <&sdma 47 0 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + status = "disabled"; + }; - ipu_di1_tve: endpoint@2 { - reg = <2>; - remote-endpoint = <&tve_in>; - }; + fec: ethernet@63fec000 { + compatible = "fsl,imx53-fec", "fsl,imx25-fec"; + reg = <0x63fec000 0x4000>; + interrupts = <87>; + clocks = <&clks IMX5_CLK_FEC_GATE>, + <&clks IMX5_CLK_FEC_GATE>, + <&clks IMX5_CLK_FEC_GATE>; + clock-names = "ipg", "ahb", "ptp"; + status = "disabled"; }; - }; - tve: tve@63ff0000 { + tve: tve@63ff0000 { compatible = "fsl,imx53-tve"; reg = <0x63ff0000 0x1000>; interrupts = <92>; @@ -357,68 +823,33 @@ remote-endpoint = <&ipu_di1_tve>; }; }; - }; - - src: src@53fd0000 { - compatible = "fsl,imx53-src", "fsl,imx51-src"; - reg = <0x53fd0000 0x4000>; - #reset-cells = <1>; - }; - - ldb: ldb@53fa8008 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx53-ldb"; - reg = <0x53fa8008 0x4>; - gpr = <&gpr>; - clocks = <&clks IMX5_CLK_LDB_DI0_SEL>, - <&clks IMX5_CLK_LDB_DI1_SEL>, - <&clks IMX5_CLK_IPU_DI0_SEL>, - <&clks IMX5_CLK_IPU_DI1_SEL>, - <&clks IMX5_CLK_LDB_DI0_GATE>, - <&clks IMX5_CLK_LDB_DI1_GATE>; - clock-names = "di0_pll", "di1_pll", - "di0_sel", "di1_sel", - "di0", "di1"; - status = "disabled"; - - lvds-channel@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - status = "disabled"; - - port@0 { - reg = <0>; - - lvds0_in: endpoint { - remote-endpoint = <&ipu_di0_lvds0>; - }; - }; - - port@2 { - reg = <2>; - }; - }; - - lvds-channel@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - status = "disabled"; + }; - port@1 { - reg = <1>; + vpu: vpu@63ff4000 { + compatible = "fsl,imx53-vpu", "cnm,coda7541"; + reg = <0x63ff4000 0x1000>; + interrupts = <9>; + clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>, + <&clks IMX5_CLK_VPU_GATE>; + clock-names = "per", "ahb"; + resets = <&src 1>; + iram = <&ocram>; + }; - lvds1_in: endpoint { - remote-endpoint = <&ipu_di1_lvds1>; - }; - }; + sahara: crypto@63ff8000 { + compatible = "fsl,imx53-sahara"; + reg = <0x63ff8000 0x4000>; + interrupts = <19 20>; + clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>, + <&clks IMX5_CLK_SAHARA_IPG_GATE>; + clock-names = "ipg", "ahb"; + }; + }; - port@2 { - reg = <2>; - }; - }; + ocram: sram@f8000000 { + compatible = "mmio-sram"; + reg = <0xf8000000 0x20000>; + clocks = <&clks IMX5_CLK_OCRAM>; }; }; }; -- 2.39.5