From 0d832b322109e76953bc58e4d2723d2c73dfb604 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 13 Jul 2018 11:04:56 +0200 Subject: [PATCH] sysreset: Add support for gpio-restart The Linux kernel has binding for gpio-restart node. This patch is adding basic support without supporting any optional properties. This driver was tested on Microblaze system where gpio is connected to SoC reset logic. Output value is handled via gpios cells values. In gpio_reboot_request() set_value is writing 1 because dm_gpio_set_value() is capable to changing it when it is ACTIVE_LOW. ... if (desc->flags & GPIOD_ACTIVE_LOW) value = !value; ... Signed-off-by: Michal Simek Reviewed-by: Philipp Tomsich Reviewed-by: Simon Glass --- MAINTAINERS | 1 + drivers/sysreset/Kconfig | 8 +++++ drivers/sysreset/Makefile | 1 + drivers/sysreset/sysreset_gpio.c | 59 ++++++++++++++++++++++++++++++++ 4 files changed, 69 insertions(+) create mode 100644 drivers/sysreset/sysreset_gpio.c diff --git a/MAINTAINERS b/MAINTAINERS index 570bc6d1a5..91e4ad7c75 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -419,6 +419,7 @@ F: drivers/net/xilinx_axi_emac.c F: drivers/net/xilinx_emaclite.c F: drivers/serial/serial_xuartlite.c F: drivers/spi/xilinx_spi.c +F: drivers/sysreset/sysreset_gpio.c F: drivers/watchdog/xilinx_tb_wdt.c N: xilinx diff --git a/drivers/sysreset/Kconfig b/drivers/sysreset/Kconfig index a6d48e8a66..cec612ed50 100644 --- a/drivers/sysreset/Kconfig +++ b/drivers/sysreset/Kconfig @@ -15,6 +15,14 @@ config SYSRESET if SYSRESET +config SYSRESET_GPIO + bool "Enable support for GPIO reset driver" + select GPIO + help + Reset support via GPIO pin connected reset logic. This is used for + example on Microblaze where reset logic can be controlled via GPIO + pin which triggers cpu reset. + config SYSRESET_PSCI bool "Enable support for PSCI System Reset" depends on ARM_PSCI_FW diff --git a/drivers/sysreset/Makefile b/drivers/sysreset/Makefile index 0da58a1cf6..ca533cfefa 100644 --- a/drivers/sysreset/Makefile +++ b/drivers/sysreset/Makefile @@ -3,6 +3,7 @@ # (C) Copyright 2016 Cadence Design Systems Inc. obj-$(CONFIG_SYSRESET) += sysreset-uclass.o +obj-$(CONFIG_SYSRESET_GPIO) += sysreset_gpio.o obj-$(CONFIG_SYSRESET_PSCI) += sysreset_psci.o obj-$(CONFIG_SYSRESET_SYSCON) += sysreset_syscon.o obj-$(CONFIG_SYSRESET_WATCHDOG) += sysreset_watchdog.o diff --git a/drivers/sysreset/sysreset_gpio.c b/drivers/sysreset/sysreset_gpio.c new file mode 100644 index 0000000000..ed9a49ad08 --- /dev/null +++ b/drivers/sysreset/sysreset_gpio.c @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 Xilinx, Inc. - Michal Simek + */ + +#include +#include +#include +#include +#include + +struct gpio_reboot_priv { + struct gpio_desc gpio; +}; + +static int gpio_reboot_request(struct udevice *dev, enum sysreset_t type) +{ + struct gpio_reboot_priv *priv = dev_get_priv(dev); + + /* + * When debug log is enabled please make sure that chars won't end up + * in output fifo. Or you can append udelay(); to get enough time + * to HW to emit output fifo. + */ + debug("GPIO reset\n"); + + /* Writing 1 respects polarity (active high/low) based on gpio->flags */ + return dm_gpio_set_value(&priv->gpio, 1); +} + +static struct sysreset_ops gpio_reboot_ops = { + .request = gpio_reboot_request, +}; + +int gpio_reboot_probe(struct udevice *dev) +{ + struct gpio_reboot_priv *priv = dev_get_priv(dev); + + /* + * Linux kernel DT binding contain others optional properties + * which are not supported now + */ + + return gpio_request_by_name(dev, "gpios", 0, &priv->gpio, GPIOD_IS_OUT); +} + +static const struct udevice_id led_gpio_ids[] = { + { .compatible = "gpio-restart" }, + { } +}; + +U_BOOT_DRIVER(gpio_reboot) = { + .id = UCLASS_SYSRESET, + .name = "gpio_restart", + .of_match = led_gpio_ids, + .ops = &gpio_reboot_ops, + .priv_auto_alloc_size = sizeof(struct gpio_reboot_priv), + .probe = gpio_reboot_probe, +}; -- 2.39.5