Tom Rini [Mon, 27 Mar 2023 15:16:51 +0000 (11:16 -0400)]
Merge branch '2023-03-27-rockchip-rk3399-fixes'
- A series of minor cleanups to DISTRO_DEFAULTS and BOOTSTD so that the
rk3399 bootstd migration can be complete and functional now, and make
future migrations easier.
Tom Rini [Fri, 24 Mar 2023 20:58:15 +0000 (16:58 -0400)]
rockchip: Use BOOTSTD_DEFAULTS if not DISTRO_DEFAULTS
When we do not enable DISTRO_DEFAULTS (generally, to get distro_bootcmd)
we instea do want to imply BOOTSTD_DEFAULTS so that when using bootstd
the general distro boot functionality will still work.
Simon Glass [Fri, 24 Mar 2023 20:58:13 +0000 (16:58 -0400)]
boot: Create a common BOOT_DEFAULTS for distro and bootstd
These two features use a lot of common options. Move them into a common
CONFIG to reduce duplication.
Use 'select' for most options since these are things that boards aren't
supposed to override. For now it is not possible to disable
BOOT_DEFAULTS but we may take another look later.
Note that five options use 'imply' to match existing behaviour.
Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Rework a bit so we don't grow so many platforms unintentionally] Signed-off-by: Tom Rini <trini@konsulko.com>
Simon Glass [Fri, 24 Mar 2023 20:58:10 +0000 (16:58 -0400)]
rockchip: Drop bootstage stash in TPL and SPL for rockpro64
Unfortunately the IRAM used to stash the bootstage records in TPL
becomes inaccessible after SPL runs. Presumably this is because of ATF
taking it over.
We could move the stash to another address in SPL, before passing it to
U-Boot proper. But it seems easier to wait until we have support for
standard passage[1] which should not be too far away.
Sergiu Moga [Wed, 8 Mar 2023 14:39:53 +0000 (16:39 +0200)]
clk: at91: sam9x60: Add initial setup of UPLL and USBCK rates
In order for some of the functionalities, such as the USB clocks,
to work properly we need some clocks to be properly initialised
at the very beginning of booting.
Claudiu Beznea [Wed, 8 Mar 2023 14:39:52 +0000 (16:39 +0200)]
clk: at91: pmc: export clock setup to pmc
Clock setup was intended for setting clocks at boot time on SAMA7G5,
e.g. for root clocks like PLLs, that were used to feed IPs needed alive
in u-boot (e.g. Ethernet clock feed by a PLL). Export this functionality
to all at91 clocks as it may be necessary on other SoCs.
Sergiu Moga [Wed, 8 Mar 2023 14:39:50 +0000 (16:39 +0200)]
clk: at91: Add support for sam9x60 USB clock
Implement sam9x60 USB clock driver. This clock has
three parents: PLLA, UPLL and MAINXTAL. The driver is
aware of the three possible parents with the help of the
two mux tables provied to the driver during the registration
of the clock.
* Let EFI app call ExitBootServices() before legacy booting kernel
* Support zboot and bootm in the EFI app
* Let efi command show configuration tables
* Support booting a 64-bit kernel from 64-bit EFI app
* Allocate device-tree copy from high memory
* simplify efi_str_to_u16()
cmd: bootefi: allocate device-tree copy from high memory
The bootefi command creates a copy of the device-tree within the first
127 MiB of memory. This may lead to overwriting previously loaded binaries
(e.g. kernel, initrd).
Linux EFI stub itself copies U-Boot's copy of the device-tree. This means
there is not restriction for U-Boot to place the device-tree copy to any
address. (Restrictions existed for 32bit ARM before Linux commit 7a1be318f579 ("ARM: 9012/1: move device tree mapping out of linear region")
for legacy booting.
Simon Glass [Sun, 19 Mar 2023 19:30:15 +0000 (08:30 +1300)]
efi: Support showing tables
Add a command (for the app and payload) to display the tables provided
by EFI. Note that for the payload the tables should always be present, so
an error message is unnecessary and would bloat the code.
Simon Glass [Sun, 19 Mar 2023 19:30:12 +0000 (08:30 +1300)]
efi: Include GUID names with EFI app and payload
These are currently only available when running with EFI_LOADER.
Expand this to include the app and payload, since it is useful to be
able to decode things there.
Simon Glass [Sun, 19 Mar 2023 19:30:05 +0000 (08:30 +1300)]
efi: Set RUN_64BIT correctly for the EFI app
The U-Boot EFI app can run as a 64-bit program, so set the Kconfig
correctly in that case. Make sure it doesn't build SPL, since there is
no need to switch from 32 to 64 bit when running.
EFI device paths for block devices must be unique. If a non-unique device
path is discovered, probing of the block device fails.
Currently we use UsbClass() device path nodes. As multiple devices may
have the same vendor and product id these are non-unique. Instead we
should use Usb() device path nodes. They include the USB port on the
parent hub. Hence they are unique.
A USB storage device may contain multiple logical units. These can be
modeled as Ctrl() nodes.
Reported-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
EFI device paths for block devices must be unique. If a non-unique device
path is discovered, probing of the block device fails.
Currently we use UsbClass() device path nodes. As multiple devices may
have the same vendor and product id these are non-unique. Instead we
should use Usb() device path nodes. They include the USB port on the
parent hub. Hence they are unique.
A USB storage device may contain multiple logical units. These can be
modeled as Ctrl() nodes.
Reported-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Fri, 24 Mar 2023 21:00:41 +0000 (17:00 -0400)]
Merge branch 'rpi-2023.04' of https://source.denx.de/u-boot/custodians/u-boot-raspberrypi
- Fixes for booting newer revs of the SoC in the Raspberry Pi 4
- Propagate some firmware DT properties to the loaded DT
- Update the Zero2W upstream DT name
Due to this change in firmware behavior, bcm2835_get_mmc_clock now
returns a clock rate of zero since we do not issue SET_CLOCK_RATE.
This results in degraded MMC performance.
SET_CLOCK_RATE fixes the clock to a specific value and disables scaling
so is not an ideal solution.
Instead, fallback to GET_MAX_CLOCK_RATE in bcm2835_get_mmc_clock if
GET_CLOCK_RATE returns zero.
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Pali Rohár [Thu, 23 Mar 2023 19:57:55 +0000 (20:57 +0100)]
tools: kwboot: Workaround A38x BootROM bug for images with a gap
A38x BootROM has a bug which cause that BootROM loads data part of UART
image into RAM target address increased by one byte when source address
and header size stored in the image header are not same.
Workaround this bug by completely removing a gap between header and data
part of the UART image. Without gap, this BootROM bug is not triggered.
This gap can be present in SDIO or SATA image types which have aligned
start of the data part to the media sector size. With this workaround
kwboot should be able to convert and send SDIO or SATA images for UART
booting.
Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
Pali Rohár [Thu, 23 Mar 2023 19:57:54 +0000 (20:57 +0100)]
tools: kwboot: Fix sending very small images
Sending of very small images (smaller than 128 bytes = xmodem block size)
cause out-of-bound memory read access. Fix this issue by ensuring that
hdrsz when sending image is not larger than total size of the image.
Issue was introduced in commit f8017c37799c ("tools: kwboot: Fix sending
Kirkwood v0 images"). Special case when total image is smaller than header
size aligned to multiply of xmodem size is already handled since that
commit.
Pali Rohár [Thu, 23 Mar 2023 19:57:53 +0000 (20:57 +0100)]
tools: kwboot: Fix inserting UART data checksum without -B option
Commit 7665ed2fa04e ("tools: kwboot: Fix parsing UART image without data
checksum") added fixup code to insert place for data checksum if UART image
does not have it. Together with option -B (change baudrate), kwboot
calculates this checksum. Without option -B, it inserts only place for
checksum but does not calculate it.
This commit fix above logic and calculate data checksum also when kwboot is
used without -B option.
Fixes: 7665ed2fa04e ("tools: kwboot: Fix parsing UART image without data checksum") Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
Ensure that UART aligned header size is always stored into kwbimage v1
header. It is needed for proper UART booting. Calculation of headersz field
was broken in commit d656f5a0ee22 ("tools: kwboot: Calculate real used
space in kwbimage header when calling kwboot_img_grow_hdr()") which
introduced optimization of kwboot_img_grow_hdr() function.
Fixes: d656f5a0ee22 ("tools: kwboot: Calculate real used space in kwbimage header when calling kwboot_img_grow_hdr()") Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
Armada 385 BootROM ignores low 7 bits of headersz when parsing kwbimage
header of UART type, which effectively means that headersz is rounded down
to multiply of 128 bytes. For all other image types BootROM reads and use
all bits of headersz. Therefore fill into UART type of kwbimage v1 headersz
aligned to 128 bytes.
Fixes: 2b0980c24027 ("tools: kwbimage: Fill the real header size into the main header") Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
Tony Dinh [Fri, 3 Mar 2023 03:27:29 +0000 (19:27 -0800)]
arm: mvebu: Set common SPI flash default speed and mode
CONFIG_SF_DEFAULT_SPEED is used in SPL SPI to configure and probe the
flash device during DM SPI uclass probing process, if the
spi-max-frequency is not available in the DTB. Currently the max
frequency is not available, because of the probing mechanism in SPI
uclass has not been fully updated to DM.
The CONFIG_SF_DEFAULT_SPEED is set to 1Mhz if a board defconfig
does not specify it. This speed is too slow and result in a few
seconds delay while the u-boot image is loaded from flash. Based on a
survey of the device tree specifications for MVEBU boards, a sane default
value should be 10Mhz. The default of 10Mhz enables an almost
instantaneously loading of the u-boot image.
Note that this patch depends on this patch series (has been merged to
u-boot-marvell/next):
https://lists.denx.de/pipermail/u-boot/2023-March/511038.html
- RESEND: correct spelling of SF_DEFAULT_MODE
Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
Tom Rini [Thu, 9 Mar 2023 16:22:11 +0000 (11:22 -0500)]
purism: librem5: Fix a function declaration in spl.c
Here we implement usb_gadget_handle_interrupts() but did not include
<linux/usb/gadget.h> so did not have the declaration correct. Fix this
and add the missing include.
Tom Rini [Thu, 9 Mar 2023 16:22:08 +0000 (11:22 -0500)]
spl: Add function prototype for spl_mmc_get_uboot_raw_sector
We did not add a prototype for spl_mmc_get_uboot_raw_sector to
include/spl.h before, so add and document one now. Correct the incorrect
prototype in board/advantech/imx8mp_rsb3720a1/imx8mp_rsb3720a1.c and
ensure that we have spl.h where we define a non-weak
spl_mmc_get_uboot_raw_sector as well.
Tom Rini [Mon, 27 Feb 2023 22:08:38 +0000 (17:08 -0500)]
proftool: Remove unused variables in make_flame_tree
With clang-15 we now get reported that in the make_flame_tree function,
neither the missing_count nor depth variables are used, only
incremenete/decremented. Remove these.
Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Mon, 27 Feb 2023 22:08:37 +0000 (17:08 -0500)]
imx8image: Remove unused cont_img_count variable
With clang-15, it is now reported that cont_img_count is unused. This is
true as the code will increment / reset this counter, but never
functionally use it. Remove it.
Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tom Rini [Mon, 27 Feb 2023 22:08:33 +0000 (17:08 -0500)]
global: Disable deprecated-non-prototype warning with clang
We have a number of places in the code which use the following syntax:
void func(a, b, c)
int a; /* Does a */
something_t *b; /* Pointer to b */
int c; /* Does c */
{
...
}
Which while not what we document as our coding style, this is also code
which we have imported from other projects, and would like to re-sync
with in the future. While the biggest example of this is the zlib code,
there are other places as well. For now, we will silence this warning.
Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Wed, 22 Mar 2023 18:01:01 +0000 (14:01 -0400)]
Merge branch '2023-03-22-assorted-fixes'
- Assorted TI platform fixes, correct location of NXP boot format git
repository, don't try and mount partitions that are too small to be
ext4 as ext4, handle .bin files in .gitattributes, flush out panic
messages for sure, and correct console location on Arm total_compute.
Setting RX flow error handling will stall the channel until descriptors
are available to move RX data. Setting this bit causes issues when
tearing down ethernet DMA channel at the end of TFTP transfer as
unrelated network packets can cause teardown to stall indefinitely waiting
for driver to queue add more desc leading to channel hang with error
logs:
udma_stop_dev2mem TIMEOUT !
udma_stop_dev2mem: peer not stopped TIMEOUT !
udma_stop_dev2mem TIMEOUT !
Fix this by clearing rx_error_handling similar to how its done for UDMA
as part of udma_alloc_rchan_sci_req()
This fixes occasional TFTP Failures seen when downloading multiple files
one after the other on AM64/AM62 SoCs.
On high security devices, ROM enables firewalls to protect the OCSRAM
region access during bootup. Only after TIFS has started (and had
time to disable the OCSRAM firewall region) will we have write access to
the region.
This means we will need to move the stack & heap from OCSRAM to HSM RAM
and reduce the size of BSS and the SPL to allow it to fit properly.
To protect us from overflowing our ~256k of HSM SRAM, add limits and
check during the wakeup SPL build.
arm: mach-k3: am62: move scratch board area to HSM RAM
On high security devices, ROM enables firewalls to protect the OCSRAM
region access during bootup. Only after TIFS has started (and had
time to disable the OCSRAM firewall region) will we have write access to
the region.
Tony Dinh [Wed, 15 Mar 2023 00:24:26 +0000 (17:24 -0700)]
console: Use flush() before panic and reset
To make sure the panic and the reset messages will go out, console flush() should be used.
Sleep periods do not work in early u-boot phase when timer driver is not initialized yet.
Peter Hoyes [Fri, 10 Mar 2023 09:53:02 +0000 (09:53 +0000)]
CI: Allow job tag to be optionally set globally
The default behavior of Gitlab runners is to only run jobs which match
the configured tag, although there is an option to run untagged jobs
[1].
To support running the CI in more complex environments where different
types of runners may be present that support different tags, allow the
DEFAULT_TAG for all jobs in the pipeline to be set globally using an
environment variable. An empty default value is provided to retain
support for untagged runners.
Marek Vasut [Fri, 3 Mar 2023 01:22:25 +0000 (02:22 +0100)]
CI: gitlab: Collect pytest artifacts
Copy build artifacts for all test.py tests, so they show up in
artifacts storage for later inspection. The test.py tests output
in CI is basically useless, but it is far more useful in the html
output for analysis and debugging.
Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Suggested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tom Rini [Tue, 28 Feb 2023 20:28:49 +0000 (15:28 -0500)]
Azure CI: Be explicit about pytest cache directory
The default pytest cache directory is in a read-only directory in Azure,
which results in a warning on the build page. Use the pytest command
line option to set the cache dir to somewhere writable.
Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Mon, 20 Mar 2023 21:52:42 +0000 (17:52 -0400)]
Merge tag 'u-boot-rockchip-20230319' of https://source.denx.de/u-boot/custodians/u-boot-rockchip
- Fix for rockchip timer driver;
- Fix for rk3568 and rk3588 boot device and clock driver;
- Fix for rk3568 reset handler;
- Fix for rk3568 sdhci DLL at 52MHz;
Tom Rini [Mon, 20 Mar 2023 20:31:52 +0000 (16:31 -0400)]
Merge branch '2023-03-17-improve-read-command-add-write-command' into next
To quote the author:
The first patch simplies do_read somewhat by making use of an existing
helper instead of parsing the dev_part string manually. As a bonus
(and my actual motivation), it now understands dev#partname syntax -
hard-coded partition numbers are so last decade.
I also need the symmetrical operation, being able to write to a named
raw partition, and fortunately it doesn't require that many lines of
code to implement that.
There's a very minor change in the error reporting due to using
cmdtp->name to generate the new messages, but I don't think "Error
reading blocks" offers much that "read error" doesn't.
New in v2: the last three patches add documentation, ensure CMD_WRITE
is set for sandbox and adds some basic test cases for the various ways
of accessing the partitions (by number, name, or as raw offset within
the whole disk).
v3: Add Simon's R-b to patches 2, 4, 5, fixup whitespace in patch 5.
I don't want to duplicate the documentation, but I can see the value
in 'write' having its own entry in the TOC, so I added a stub
write.rst that just refers to the read.rst, which then explicitly
documents both.
Marek Vasut [Sat, 18 Mar 2023 11:30:53 +0000 (12:30 +0100)]
clk: renesas: Pack reset identifier before look up
The reset identifier must be processed via MOD_CLK_PACK() before it is
used to look up register and bit within reset_regs or reset_clear_regs
arrays, otherwise completely bogus register and bit is picked from the
arrays, one which may even be out of range.
Fixes: 326e05c5e21 ("clk: renesas: Add and enable CPG reset driver") Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The Rockchip timer driver has been renamed after the fall back compatible.
There's no need to replace the timer compatible in rk3188-radxarock-u-boot.dtsi
anymore, so remove.
Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Johan Jonker [Tue, 7 Mar 2023 15:30:58 +0000 (16:30 +0100)]
rockchip: timer: rockchip_timer: fix compatible and driver name
In the binding for the Rockchip timer the compatible string
consists of a SoC orientated string and a fall back string
"rockchip,rk3288-timer", so remove all unneeded ones and
fix driver name.
Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
projects / u-boot.git / log